Printer User Manual
Table Of Contents
- Copyright and Trademarks
- Contents
- Safety Instructions
- Getting to Know Your Printer
- Printer Features and Various Printing Options
- Paper Handling
- Using the Printer Software with Windows
- About the Printer Software
- Making Changes to Printer Settings
- Making the print quality settings
- Duplex printing
- Displaying information about consumables with the printer driver
- Ordering Consumables
- Resizing printouts
- Modifying the print layout
- Using a watermark
- Using headers and footers
- Using an overlay
- Using storage form overlay
- Making Extended Settings
- Making Optional Settings
- Printing a status sheet
- Using the Reserve Job Function
- Monitoring Your Printer Using EPSON Status Monitor
- Setting Up the USB Connection
- Canceling Printing
- Uninstalling the Printer Software
- Sharing the Printer on a Network
- Using the Printer Software with Macintosh
- Using the PostScript Printer Driver
- Using the PCL6/PCL5 Printer Driver
- Using the Control Panel
- Installing Options
- Replacing Consumable Products
- Cleaning and Transporting the Printer
- Troubleshooting
- Clearing Jammed Paper
- Printing a Status Sheet
- Operational Problems
- Printout Problems
- Color Printing Problems
- Print Quality Problems
- Memory Problems
- Paper Handling Problems
- Problems Using Options
- Correcting USB Problems
- Status and Error Messages
- Canceling Printing
- Printing in the PostScript 3 Mode Problems
- The printer does not print correctly in the PostScript mode
- The printer does not print
- The printer driver or printer that you need to use does not appear in the Printer Setup Utility (Mac OS 10.3.x and 10.4.x), Print Center (Mac OS 10.2.x), or Chooser (Mac OS 9)
- The font on the printout is different from that on the screen
- The printer fonts cannot be installed
- The edges of texts and/or images are not smooth
- The printer does not print normally via the USB interface
- The printer does not print normally via the network interface
- An undefined error occurs (Macintosh only)
- Insufficient memory to print data (Macintosh only)
- Customer Support
- Technical Specifications
- Index
Using the Control Panel 199
EPSON AcuLaser C3800 User's Guide
Paper Out tttt sssss
There is no paper in the specified paper source (tttt). Load paper of the size (sssss) into
the paper source.
Paper Set tttt sssss
The paper loaded in the specified paper source (tttt) does not match the required paper
size (sssss). Replace the loaded paper with the correct size paper and press the
N Start/Stop button to resume printing, or press the + Cancel Job button to cancel the
print job.
If you press the N Start/Stop button without replacing the paper, the printer will print on the
loaded paper even though it does not match the required size.
Please Select File
Print Start is selected without selecting the file. Select the file and try again. See
"Document Print Menu" on page 169 or "Image Print Menu" on page 171 for details.
Please wait for print
Printing cannot start because the previous job is being processed. Try again after a few
seconds.
Printer Open
The front cover is open. To clear this error, close the front cover.
Print Overrun
The required time to process the print data exceeded the print engine speed because the
current page is too complex. Press the N Start/Stop button to resume printing, or press the
+ Cancel Job button to cancel the print job. If this message appears again, select On as
the Page Protect setting in the control panel’s Setup Menu or select Avoid Page Error on
the printer driver.
If you continue to receive this message when printing a particular page, try simplifying the
page by limiting the number of graphics or reducing the number and size of fonts.
To avoid this error, it is recommended that you set the Page Protect setting to On and add
more memory to the printer. See "Setup Menu" on page 175 and "Memory Module" on
page 220 for details.
RAM CHECK
The printer is checking the RAM.