Printer User Manual
Table Of Contents
- Copyright and Trademarks
- Contents
- Safety Instructions
- Getting to Know Your Printer
- Printer Features and Various Printing Options
- Paper Handling
- Using the Printer Software with Windows
- About the Printer Software
- Making Changes to Printer Settings
- Making the print quality settings
- Duplex printing
- Displaying information about consumables with the printer driver
- Ordering Consumables
- Resizing printouts
- Modifying the print layout
- Using a watermark
- Using headers and footers
- Using an overlay
- Using storage form overlay
- Making Extended Settings
- Making Optional Settings
- Printing a status sheet
- Using the Reserve Job Function
- Monitoring Your Printer Using EPSON Status Monitor
- Setting Up the USB Connection
- Canceling Printing
- Uninstalling the Printer Software
- Sharing the Printer on a Network
- Using the Printer Software with Macintosh
- Using the PostScript Printer Driver
- Using the PCL6/PCL5 Printer Driver
- Using the Control Panel
- Installing Options
- Replacing Consumable Products
- Cleaning and Transporting the Printer
- Troubleshooting
- Clearing Jammed Paper
- Printing a Status Sheet
- Operational Problems
- Printout Problems
- Color Printing Problems
- Print Quality Problems
- Memory Problems
- Paper Handling Problems
- Problems Using Options
- Correcting USB Problems
- Status and Error Messages
- Canceling Printing
- Printing in the PostScript 3 Mode Problems
- The printer does not print correctly in the PostScript mode
- The printer does not print
- The printer driver or printer that you need to use does not appear in the Printer Setup Utility (Mac OS 10.3.x and 10.4.x), Print Center (Mac OS 10.2.x), or Chooser (Mac OS 9)
- The font on the printout is different from that on the screen
- The printer fonts cannot be installed
- The edges of texts and/or images are not smooth
- The printer does not print normally via the USB interface
- The printer does not print normally via the network interface
- An undefined error occurs (Macintosh only)
- Insufficient memory to print data (Macintosh only)
- Customer Support
- Technical Specifications
- Index
Paper Handling 43
EPSON AcuLaser C3800 User's Guide
When loading envelopes, you should make paper settings as shown below:
❏ Make settings on the Basic Settings in the printer driver.
Note:
Depending on the condition of the paper, the printer may fail to feed paper properly when the
maximum amount of paper is loaded. If this happens, reduce the amount of paper loaded in the
tray.
❏ You can also make these settings on the Tray Menu in the control panel. See "Tray
Menu" on page 172.
Please note the following when handling this media.
❏ When printing on C5 or ISOB5 size envelopes, load them with the short edge first.
When printing on DL size envelopes, load them with the long edge first.
a. C5 or ISO B5
b. DL
❏ Do not use an envelope that has glue or tape on it.
Labels
You can load up to 15 mm thickness of labels into the MP tray at a time. However, you may
need to feed some labels one sheet at a time, or load them manually.
Note:
❏ Duplex printing is not available for labels.
❏ When printing on labels, you cannot set the printing resolution to 1200 dpi.
❏ Depending on the quality of labels, the printing environment, or the printing procedure, labels
might be wrinkled. Make a trial print run before you print on a lot of labels.
Paper Size: IB5, DL, or C5
Paper Source: MP Tray (up to 15 mm thick stack)
b
a