Specifications

Safety Instructions 19
❏ When connecting this product to a computer or other device
with a cable, ensure the correct orientation of the connectors.
Each connector has only one correct orientation. Inserting a
connector in the wrong orientation may damage both devices
connected by the cable.
❏ If you use an extension cord, make sure that the total of the
ampere ratings on the products plugged into the extension
cord does not exceed the extension cord ampere rating.
❏ Unplug this printer from the wall outlet and refer servicing
to a qualified service representative under the following
conditions:
When using the printer
❏ The printer weighs about 34.6 kg (76.3 lb). One person should
not attempt to lift or carry the printer. Two people should
carry it.
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into it.
C. If it has been exposed to rain or water.
D. If it does not operate normally when the operating
instructions are followed. Adjust only those controls
that are covered by the operating instructions since
improper adjustment of other controls may result in
damage and will often require extensive work by a
qualified technician to restore the product to normal
operation.
E. If it has been dropped or the cabinet has been
damaged.
F. If it exhibits a distinct change in performance,
indicating a need for service.
Downloaded from ManualsPrinter.com Manuals