Specifications

196 Using the PostScript Printer Driver
c
Caution:
❏ The Adobe PostScript 3 printer driver cannot be used on
computers running System 9.0.x or below.
❏ The Adobe PostScript 3 printer driver cannot be used on
Macintosh 68K computers.
Note:
For best results, you should connect the printer directly to the computer’s
USB port. If multiple USB hubs must be used, we recommend that you
connect the printer to the first-tier hub.
Using the PostScript Printer Driver with
Windows
To print in the PostScript mode, you will have to install the printer
driver. See the appropriate sections below for installation
instructions according to the interface that you are using to print.
Installing the PostScript printer driver for the
parallel interface
2004/09/29 11:33:53using the parallel interface is available/ including the information about Windows 95
Follow the steps below to install the PostScript printer driver for
the parallel interface.
c
Caution:
Never use EPSON Status Monitor and Postcript 3 driver at the
same time when the printer is connected via a parallel port. It may
damage the system.
Note:
❏ Installing the printer software for Windows XP or 2000 may require
administrator privileges. If you have problems, ask your
administrator for more information.
Downloaded from ManualsPrinter.com Manuals