Specifications

252 Using the Control Panel
The printer is ejecting paper due to a user request. This message
appears when pressing the N Start/Stop button once to make the
printer offline, then holding down the N Start/Stop button for
more than 2 seconds in order not to receive form feed command.
Format Error ROM A
An unformatted ROM module has been inserted.
To clear this error, either press the N Start/Stop button or turn off
the printer and remove the ROM module, then reinstall the ROM
module. If that fails to clear the error, contact your dealer.
Formatting HDD
The Hard Disk Drive is being formatted.
Hard Disk full
The optional Hard Disk Drive is full and you cannot save any
data. Delete the unnecessary data from the Hard Disk Drive. To
clear this error, select Clear Warning from the control panel’s
Reset Menu. For instruction about accessing the control panel
menus, see "How to access the control panel menus" on page 214.
HDD CHECK
The printer is checking the Hard Disk Drive.
Image Optimum
There is insufficient memory to print the page at the specified
print quality. The printer automatically lowers the print quality
so that it can continue printing. If the quality of the printout is not
acceptable, try simplifying the page by limiting the number of
graphics or reducing the number and size of fonts.
Downloaded from ManualsPrinter.com Manuals