Specifications

Using the Control Panel 263
7
7
7
7
7
7
7
7
7
7
7
7
The printer is warming up the machine to be ready to print.
Worn Fuser
This message indicates that the fuser unit is near the end of its
service life. Printing after this message appears is not guaranteed.
Turn the printer off, then reinstall the unit after it has cooled off
(30 minutes). Then replace the fuser unit with a new one. See
"Fuser Unit" on page 325 for instructions.
The error clears automatically after you replace the unit and close
all printer covers.
Worn Photoconductor
This message indicates that the photoconductor unit is near the
end of its service life. Printing after this message appears is not
guaranteed. Turn the printer off, then replace the photoconductor
unit with a new one. See "Photoconductor Unit" on page 318 for
instructions. The error clears automatically after you replace the
unit and close the printer covers.
Worn Transfer Unit
This message warns you that the transfer unit is near the end of
its service life. You can continue to print until the Replace
TransferUnit error message appears, but early replacement is
recommended to maintain high print quality.
To clear this warning message and continue printing, select Clear
All Warning from the control panel’s Reset Menu. For instruction
about accessing the control panel menus, see "How to access the
control panel menus" on page 214.
Worn uuuu Dev Unit
Downloaded from ManualsPrinter.com Manuals