Specifications

Installing Options 301
8
8
8
8
8
8
8
8
8
8
8
8
12. Turn on the printer.
To confirm that the option is installed correctly, print a Status
Sheet. See "Printing a Status Sheet" on page 377.
Note for Windows users:
If EPSON Status Monitor is not installed, you have to make settings
manually in the printer driver. See "Making Optional Settings" on page
95.
Note for Macintosh users:
When you have attached or removed printer options, you need to delete
the printer using Print Setup Utility (for Mac OS X 10.3), Print
Center (for Mac OS X 10.2 or below), or Chooser (for Mac OS 9),
and then re-register the printer.
Removing the Hard Disk Drive
New :quote the information from the similar product
c
Caution:
Before you remove the Hard Disk Drive, be sure to discharge any
static electricity by touching a grounded piece of metal.
Otherwise, you may damage static-sensitive components.
w
Warning:
Be careful when working inside the printer as some components
are sharp and may cause injury.
Perform the installation procedure in reverse.
Interface Card
New :only network standard model.
Your printer comes with a Type B interface slot. Various optional
interface cards are available to expand your printer’s interface
options.
Downloaded from ManualsPrinter.com Manuals