Specifications

Paper Handling 55
3
3
3
3
3
3
3
3
3
3
3
3
❏ When the Paper Type setting in the printer driver is set to
Transparency, do not load any other type of paper except
transparencies.
Please note the following when handling this media:
❏ Hold each sheet by its edges, as oil from your fingers may
transfer to the surface and damage the printable surface of the
sheet. The Epson logo appears on the printable side.
❏ When loading transparencies in the MP tray, insert the short
edge first as shown below.
❏ If transparencies are loaded incorrectly, the message Check
Transparency appears on the LCD panel. Remove the
jammed transparencies from the printer. To clear the jam, see
"When transparencies are jammed at the MP tray" on page
377.
c
Caution:
Sheets that have just been printed on may be hot.
Downloaded from ManualsPrinter.com Manuals