Operation Manual

j.
Start/Stop button
When the printer is printing, pressing this button stops the printing.
When the error light is flashing, pressing this button clears the error and
switches the printer to ready status.
k.
Pause/Cancel button
Press once to pause. Press again to recover from pause. While paused, the
following operations are available on the control panel.
- Canceling the current print job or stored print jobs.
- Interrupting print jobs to print a stored print job.
For instructions on these operations, see “Canceling Printing” on page 107 and
“Interrupting Printing” on page 108.
l.
Data light (Green)
On when print data is stored in the print buffer (the section of printer memory
reserved for receiving data) but not yet printed.
Flashes when the printer is processing data.
Off when no data remains in the print buffer.
Options and Consumable Products
Options
You can add to your printer’s capabilities by installing any of the following options.
❏ Printer Stand (C12C847181)
This option is installed to fix the printer and enables the printer to move easily with its casters.
❏ Paper Cassette Unit (C12C802601)
This unit increases paper feeding capacity up to 550 sheets of paper. You can install up to three
units.
❏ Duplex Unit (C12C802612)
This unit allows for automatic printing on both sides of paper.
❏ CompactFlash Memory
This option enables you to store overlay forms, use Reserve Job function, and improve the collate
printing environment. By using the Reserve Job function, you can store print jobs in the printer’s
CompactFlash memory and print them later directly from the printer’s control panel. By using the
collate printing function, you can print larger and more complex print jobs.
Note:
The CompactFlash memory must be at least 4 GB.
Epson AcuLaser C9300 Series User's Guide
Getting to Know Your Printer 24