Operation Manual

Printer driver settings
MP tray
Printer driver settings
Paper Size
User Defined Size
*
Paper Source MP Tray
Paper Type Plain/Plain (Back), Semi-Thick/Semi-Thick (Back), Preprinted/Preprinted (Back),
Recycled/Recycled (Back), Color/Color (Back), Labels, Thick/Thick (Back), Extra
Thick/Extra Thick (Back), Coated, Coated (Back)
*
75 × 98 mm at minimum and 297 × 1,200 mm at maximum.
Lower paper cassettes
Printer driver settings
Paper Size
User Defined Size
*1
Paper Source
Cassette 1, Cassette 2
*2
, Cassette 3
*2
, Cassette 4
*2
Paper Type Plain/Plain (Back), Semi-Thick/Semi-Thick (Back), Preprinted/Preprinted (Back),
Recycled/Recycled (Back), Color/Color (Back), Labels, Thick/Thick (Back), Extra
Thick
*3
/Extra Thick (Back)
*3
, Coated, Coated (Back)
*1
210 × 148 mm to 297 × 431.8 mm. However, paper that is wider than 279.4 mm and longer than 420 mm cannot be loaded
in the paper cassette. Load it in the MP tray.
*2
Available only when the optional paper cassette unit is installed.
*3
Available only when Cassette 1 is selected as Paper Source.
Note:
❏ Depending on the quality of the non-standard size paper, the printing environment, or the printing
procedure, the paper might skew. Make a trial print run before you print on a lot of non-standard size
paper.
❏ For Windows, access the printer driver, then select User Defined Size from the Paper Size list on the
Basic Settings tab. In the User Defined Paper Size dialog box, adjust the Paper Width, Paper Length,
and Unit settings to match your custom paper. Then click OK and your custom paper size will be
saved.
❏ The saved paper sizes can only be used with the printer driver you saved them to. Even if multiple
printer names are set for a printer driver, the settings can be available only for the printer name in
which you saved the settings.
❏ When sharing the printer on a network, you cannot create User Defined Size at the client.
Epson AcuLaser C9300 Series User's Guide
Printing Tasks 40