Operation Manual

If you select BarCode, the printer converts bit images to bar codes by automatically filling in any
vertical gaps between dots. This produces unbroken vertical lines that can be read by a bar code reader.
This mode will reduce the size of the image being printed, and may also cause some distortion when
printing bit image graphics.
ZeroChar
Specifies whether the printer prints a slashed or unslashed zero.
FX Menu
Item Settings (default in bold)
Font
Courier, Prestige, Roman, Sans serif, Script, Orator S, OCR A, OCR B
Pitch
10, 12, 15cpi, Prop.
Condensed
Off, On
T.Margin
0.40 ... 0.50 ... 1.50inch in 0.05-inch increments
Text
1... 66 ... 132Lines
CGTable
PcUSA, Italic, PcMultilin, PcPortugue, PcCanFrenc, PcNordic, PcTurkish2, PcIcelandic,
PcE.Europe, BpBRASCII, BpAbicomp, Roman-8, PcEur858, ISO Latin1, 8859-15ISO
Country
USA, France, Germany, UK, Denmark, Sweden, Italy, Spain1, Japan, Norway, Denmark2, Spain2,
LatinAmeric
Auto CR
On, Off
Auto LF
Off, On
Bit Image
Dark, Light, BarCode
ZeroChar
0, (or the zero character with a slash)
Font
Selects the font.
Pitch
Selects the pitch (the horizontal spacing) of the font in fixed pitch, measured in cpi (characters per
inch). You can also choose proportional spacing.
Epson AcuLaser C9300 Series User's Guide
Using the Control Panel 83