Operation Manual

The printer is able to emulate the graphics densities set with the printer commands. If you select Dark,
the bit image density is high, and if you select Light, the bit image density is low.
If you select BarCode, the printer converts bit images to bar codes by automatically filling in any
vertical gaps between dots. This produces unbroken vertical lines that can be read by a bar code reader.
This mode will reduce the size of the image being printed, and may also cause some distortion when
printing bit image graphics.
ZeroChar
Selects whether the printer prints a slashed or unslashed zero.
I239X Menu
The I239X mode emulates IBM
®
2390/2391 Plus commands.
These settings are available only when the printer is in the I239X mode.
Item Settings (default in bold)
Font
Courier, Prestige, Gothic, Orator, Script, Presentor, Sans serif
Pitch
10, 12, 15, 17, 20, 24cpi, Prop.
Code Page
437, 850, 858, 860, 863, 865
T.Margin
0.30 ... 0.40 ...1.50inch in 0.05-inch increments
Text
1 ... 67 ... 132Lines
Auto CR
Off, On
Auto LF
Off, On
Alt. Graphics
Off, On
Bit Image
Dark, Light
ZeroChar
0, (or the zero character with a slash)
CharacterSet
1, 2
Font
Selects the font.
Epson AcuLaser C9300 Series User's Guide
Using the Control Panel 85