User`s guide

About Duplex Printing
113
About Duplex Printing
Duplex (double-sided) printing can be done with this printer, which has the
duplex unit built in as a standard. If the paper has low opacity (high translu-
cency), then the printed data from one side of the page will show through to
the other side. Check your application for margin information. For best
results, print a small quantity to make sure the opacity is acceptable.
Note
Only plain paper, 60–90 g/m
2
(16–24 lb bond) can be autoduplexed. See
“Specifications” on page 90.
Duplexing envelopes, labels, letterheads, postcards, thick stock, glossy
media or transparencies is not supported.
How do I autoduplex?
Check your application to determine how to set your margins for duplex
(double-sided) printing.
The following Binding Position settings are available.
If “Short Edge (Top)” is selected, the pages will be laid out
to flip at the top.
If “Long Edge (Left)” is selected, the pages will be laid out
to flip at the side.
1
3
1
2
1
1
1
1
1
2
3
Downloaded from ManualsPrinter.com Manuals