User`s guide

Solving Problems with Media Misfeeds240
Media is mis-
feeding.
Envelopes are facing
the wrong way in Tray
1.
Load the envelopes in Tray 1 with the
flaps facing up.
If the flaps are on the long edge, load
the envelopes with the flap edge
toward the machine and the flap side
facing up.
Transparencies have
collected static elec-
tricity in the tray.
Remove the transparencies and load
them in Tray 1 one sheet at a time. Do
not fan transparencies before loading
them.
Unsupported media
(wrong size, thick-
ness, type, etc.) is
being used.
Use Epson-approved media.
See “Specifications” on page 90.
The media feed roller
is dirty.
Clean the media feed roller.
For more details, refer to “Media Roll-
ers” on page 203.
Symptom Cause Solution
Downloaded from ManualsPrinter.com Manuals