User`s guide

Solving Other Problems
247
The
web-based
utility cannot
be accessed.
The Web-based
EpsonNet config
Administrator's pass-
word is incorrect.
The Web-based EpsonNet config
Administrator password has a 0-char-
acter minimum and an 16-character
maximum. For details of the
Web-based EpsonNet config adminis-
trator password, refer to the Reference
Guide on the software CD-ROM.
Media is
wrinkled.
The media is moist
from humidity or hav-
ing water spilled on it.
Remove the moist media and replace it
with new, dry media.
The media feed roller
or fuser unit is defec-
tive.
Check them for damage. If necessary,
contact Technical Support with the
error information.
Unsupported media
(wrong size, thick-
ness, type, etc.) is
being used.
Use Epson-approved media. See
“Specifications” on page 90.
Data was
sent to the
machine, but
it doesn't
print.
An error message is
displayed in the mes-
sage window.
Handle according to the message dis-
played.
A job may be can-
celled if user authen-
tication setting is
specified.
Click the User Authentication button in
the printer driver, and then type in the
necessary information before printing.
The hard
disk was
automati-
cally format-
ted.
The hard disk was
full.
When the control panel displays HDD
NEAR FULL, delete print jobs and
resources (fonts, forms, etc.) which
were saved on the hard disk using
Web-based EpsonNet config.
Symptom Cause Solution
Downloaded from ManualsPrinter.com Manuals