Printer/Copier/Scanner User’s Guide NPD4496-00 EN
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Copyright Notice No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 3. You may make one backup copy of the Host Software, provided your backup copy is not installed or used on any computer. Notwithstanding the above restrictions, you may install the Host Software on any number of computers solely for use with one or more printing systems running the Printing Software. 4.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 12. You agree that you will not export the Software in any form in violation of any applicable laws and regulations regarding export control of any countries. About Adobe Color Profile ADOBE SYSTEMS INCORPORATED COLOR PROFILE LICENSE AGREEMENT NOTICE TO USER: PLEASE READ THIS CONTRACT CAREFULLY.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 3. DISTRIBUTION If you choose to distribute the Software, you do so with the understanding that you agree to defend, indemnify and hold harmless Adobe against any losses, damages or costs arising from any claims, lawsuits or other legal actions arising out of such distribution, including without limitation, your failure to comply with this Section 3.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 5. LIMITATION OF LIABILITY IN NO EVENT WILL ADOBE OR ITS SUPPLIERS BE LIABLE TO YOU FOR ANY DAMAGES, CLAIMS OR COSTS WHATSOEVER OR ANY CONSEQUENTIAL, INDIRECT, INCIDENTAL DAMAGES, OR ANY LOST PROFITS OR LOST SAVINGS, EVEN IF AN ADOBE REPRESENTATIVE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSS, DAMAGES, CLAIMS OR COSTS OR FOR ANY CLAIM BY ANY THIRD PARTY.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 10. GENERAL You may not assign your rights or obligations granted under this Agreement without the prior written consent of Adobe. None of the provisions of this Agreement shall be deemed to have been waived by any act or acquiescence on the part of Adobe, its agents, or employees, but only by an instrument in writing signed by an authorized signatory of Adobe.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 4. TOYO INK shall not be responsible for answering any question related to this ICC Profile. 5. All company names and product names used in this document is the trademarks or registered trademarks of their respective holder. This ICC Profile made by GretagMacbeth ProfileMaker and granted TOYO INK certain license to distribute by GretagMacbeth AG. TOYO Offset Coated 2.1 © TOYO INK MFG. CO., LTD.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 3. Term a. This License Agreement is effective until terminated. b. You may terminate this License Agreement by notifying DIC in writing of your intention to terminate this License Agreement and by destroying, all copies of the Profile in your possession or control. c.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 5. WARRANTY DISCLAIMER a. THE PROFILE IS PROVIDED TO YOU FREE OF CHARGE, AND ON AN “AS-IS” BASIS, IN ACCORDANCE WITH THE TERMS AND COONDITIONS OF THIS LICENSE AGREEMENT. DIC PROVIDES NO TECHNICAL SUPPORT, WARRANTIES OR REMEDIES FOR THE PROFILE. b.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide OpenSSL Statement LICENSE ISSUES The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original SSLeay license apply to the toolkit. See below for the actual license texts. Actually both licenses are BSD-style Open Source licenses. In case of any license issues related to OpenSSL please contact openssl-core@openssl.org. OpenSSL License Copyright © 1998-2005 The OpenSSL Project.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS” AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 3. All advertising materials mentioning features or use of this software must display the following acknowledgement: “This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)” The word “cryptographic” can be left out if the rouines from the library being used are not cryptographic related :-). 4.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide NetSNMP License Part 1: CMU/UCD copyright notice: (BSD like) Copyright 1989, 1991, 1992 by Carnegie Mellon University Derivative Work - 1996, 1998-2000 Copyright 1996, 1998-2000 The Regents of the University of California All Rights Reserved Permission to use, copy, modify and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appears in all copies and that
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Part 4: Sun Microsystems, Inc. copyright notice (BSD) Copyright © 2003 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, California 95054, U.S.A. All rights reserved. Use is subject to license terms below. This distribution may include materials developed by third parties. Sun, Sun Microsystems, the Sun logo and Solaris are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide ❏ Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. ❏ Neither the name of Sparta, Inc nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Portions of src/lib/crypto have the following copyright: Copyright © 1998 by the FundsXpress, INC. All rights reserved. Export of this software from the United States of America may require a specific license from the United States Government. It is the responsibility of any person or organization contemplating export to obtain such a license before exporting.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide The free distribution and use of this software in both source and binary form is allowed (with or without changes) provided that: 1. distributions of this source code include the above copyright notice, this list of conditions and the following disclaimer; 2. distributions in binary form include the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other associated materials; 3.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Portions funded by Sandia National Laboratory and developed by the University of Michigan’s Center for Information Technology Integration, including the PKINIT implementation, are subject to the following license: COPYRIGHT © 2006-2007 THE REGENTS OF THE UNIVERSITY OF MICHIGAN ALL RIGHTS RESERVED Permission is granted to use, copy, create derivative works and redistribute this software and such derivative works for any purpose, so long as the
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name(s) of the above-listed copyright holder(s) nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide ❏ Postage stamps (canceled or uncanceled) ❏ Checks or drafts drawn by government agencies ❏ Internal revenue stamps (canceled or uncanceled) ❏ Passports ❏ Immigration papers ❏ Motor vehicle licenses and titles ❏ House and property titles and deeds General ❏ Identification cards, badges, or insignias ❏ Copyrighted works without permission of the copyright owner In addition, it is prohibited under any circumstances to copy domestic or foreign cu
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Contents Software License Agreement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 About Adobe Color Profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ICC Profile for TOYO INK Standard Color on Coated paper (TOYO Offset Coated 2.1). . . . . . . . . . . .
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Chapter 2 Control Panel and Configuration Menu About the Control Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Control Panel Indicators and Keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Display Indications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Uninstalling the Printer Driver (for Windows). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 Printer Driver Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 Common Buttons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Scanning With the Machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145 Basic Scanning Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145 Specifying the Data Location. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Status, Error, and Service Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230 Status Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230 Error Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Index Contents 29
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Chapter 1 Introduction Getting Acquainted with Your Machine Space Requirements To ensure easy operation, consumable replacement and maintenance, adhere to the recommended space requirements detailed below.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Part Names The illustrations used in this manual show Epson AcuLaser CX37DNF as an example. Front View 1– Control panel 2– Automatic Document Feeder (ADF) 2-a ADF feed cover 2-b Document guide 2-c Document feed tray 2-d Extension tray 2-e Document output tray 2-f Document stopper Note: ❏ The ADF may appear as “document cover” in some status and error messages. ❏ Lower the document stopper when scanning Legal-size paper with the ADF.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 4– Tray 1 (Manual feed tray) 5– Tray 2 6– Original cover pad 7– Original glass 8– Extension tray 9– Output tray 10– Scanner unit 11– Fuser unit 12– Right door 13– Transfer roller 14– Transfer belt unit 15– Photoconductor unit(s) 16– Front cover 17– Waste toner bottle 18– Toner cartridge(s) Introduction 32
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 18 11 17 16 12 15 14 13 Rear View 7 1 5 2 6 4 3 1– 10Base-T/100Base-TX/1000Base-T (IEEE 802.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 2– USB port 3– Power switch 4– Power connection 5– LINE (telephone line) jack (Epson AcuLaser CX37DNF only) 6– TEL (telephone) jack (Epson AcuLaser CX37DNF only) 7– Rear cover Software Disc PostScript Drivers/PCL Drivers Drivers Use/Benefit Windows XP/Vista/7/Server 2003/Server 2008 for 32bit These drivers give you access to all of the printer features, including finishing and advanced layout.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Scanner Drivers Drivers Use/Benefit TWAIN Driver for Windows XP/Vista/7/Server 2003/Server 2008 for 32bit These drivers enable you to set scanning functions, such as the color setting and size adjustments. TWAIN Driver for Windows XP/Vista/7/Server 2003/Server 2008/Server 2008 R2 for 64bit For details, refer to “Windows TWAIN Driver Settings” on page 139. TWAIN Driver for Mac OS X 10.3/10.4/10.5/10.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Documentation Documentation Use/Benefit Setup Guide This manual provides installation details that must be performed in order to use this machine, such as setting up the machine and installing the drivers. Printer/Copier/Scanner User’s Guide (this manual) This manual provides details on general daily operations, such as using the drivers and control panel and replacing consumables.
Epson AcuLaser CX37 Series Windows Server 2003 Printer/Copier/Scanner User’s Guide Standard/Enterprise Edition Standard/Enterprise x64 Edition ❏ Mac OS X (10.3.9 or later; We recommend installing the latest patch) ❏ RedHat Enterprise Linux 5 Desktop, SUSE Linux Enterprise Desktop 10 ❏ Free hard disk space 256 MB or more ❏ RAM 128 MB or more ❏ CD/DVD drive ❏ I/O interface ❏ 10Base-T/100Base-TX/1000Base-T (IEEE 802.3) Ethernet interface port ❏ USB 2.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Chapter 2 Control Panel and Configuration Menu About the Control Panel Epson AcuLaser CX37DNF 1 2 18 17 3 4 5 14 16 15 14 13 6 7 11 12 8 10 9 Epson AcuLaser CX37DN 3 4 14 16 15 14 13 1 6 12 7 11 10 8 9 Control Panel and Configuration Menu 38
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Control Panel Indicators and Keys No. Part Name Description 1 Addressbook key ❏ For Epson AcuLaser CX37DNF, displays the information registered in the favorite list, speed dial destinations and group dial destinations. ❏ For Epson AcuLaser CX37DN, displays the information registered in the favorite list, address list and group list. ❏ For details, refer to “Specifying the Destination Address (Scan to E-mail/FTP/ SMB)” on page 147.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide No. Part Name Description 13 Back key ❏ Clears the specified number of copies and entered text. ❏ Press to return to the previous screen. ❏ Press to cancel the setting that is currently displayed. 14 l/r keys Moves left and right through menus, options, or choices. 15 Select key Press to select the setting that is currently displayed. 16 u/d keys Moves up and down through menus, options, or choices.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Copy settings No. Indication Description 1 Media tray Indicates the media tray that is selected. For details on selecting the media tray, refer to “Selecting the Media Tray” on page 128. 2 Zoom ratio Indicates the zoom ratio that is specified. For details on specifying the zoom ratio, refer to “Specifying the Zoom Ratio” on page 127. 3 Copy quality Indicates the copy quality that is selected.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide No. Indication Description 5 2in1/4in1 copying Indicates whether or not 2in1/4in1 copying is selected. For details on selecting 2in1/4in1 copying, refer to “Setting 2in1/4in1 Copying” on page 129. 6 Double-sided/ single-sided copying Indicates whether double-sided copying or single-sided copying is selected. For details on selecting double-sided/single-sided copying, refer to “Setting Duplex (Double-Sided) Copying” on page 134.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Scan settings No. Indication Description 1 Data format Indicates the data format that is selected. For details on selecting the data format, refer to “Selecting the Data Format” on page 162. 2 Scan quality Indicates the scan quality that is selected. For details on selecting the scan quality, refer to “Selecting the Scan Quality Setting” on page 162. 3 Scan data destination Indicates the specified destination for the scan data.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide No. Indication Description 4 Single-sided/ double-sided scanning Indicates whether double-sided scanning or single-sided scanning is selected. For details on selecting double-sided/single-sided scanning, refer to “Setting Duplex (Double-Sided) Scanning” on page 163. 5 Scan size Indicates the scan size that is selected. For details on selecting the scan size, refer to “Setting the Scan Size” on page 164.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide To cancel printing, press the Stop/Reset key when the print screen appears. Press the Select key to select YES. No. Indication Description 1 Status Displays messages indicating operations such as printing. 2 Media tray/media size Displays the printing information (media tray, media size and media type). Note: This does not appear if PLAIN PAPER or RECYCLED PAPER is selected as the media type.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide REPORT/STATUS Menu To display the REPORT/STATUS screen, select REPORT/STATUS in the main screen, and then press the Select key. From this menu, the total number of pages printed by this machine and the remaining amount of the consumables can be viewed. In addition, the reports can be printed. Note: To return to the previous screen, press the Back key. To display the main screen, press the Stop/Reset key.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide C P/U Displays the remaining service life of the cyan (C) photoconductor unit as a percentage. M P/U Displays the remaining service life of the magenta (M) photoconductor unit as a percentage. Y P/U Displays the remaining service life of the yellow (Y) photoconductor unit as a percentage. K P/U Displays the remaining service life of the black (K) photoconductor unit as a percentage.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide CONFIGURATION PAGE Prints a estimate of the percentage of toner remaining and the settings, information and status of this machine. PS FONT LIST Prints the PostScript font list. PCL FONT LIST Prints the PCL font list. DIRECTORY LIST Prints the directory list of the hard disk. Configuration Menu Overview To display the settings menu for this machine, select UTILITY in the main screen, and then press the Select key.
Epson AcuLaser CX37 Series SOUND SETTING (Epson AcuLaser CX37DNF only) DISABLE/ENABLE Settings Printer/Copier/Scanner User’s Guide DISABLE / ENABLE Select if operation sounds are to be produced. CONFIRMATI ON*1 VALID INPUT Settings OFF / LOW / MIDDLE / HIGH Select whether sounds are produced when keys are pressed to enter data. INVALID INPUT Settings OFF / LOW / MIDDLE / HIGH Select whether sounds are produced when keys are pressed to enter invalid data.
Epson AcuLaser CX37 Series CAUTION*1 LOW CAUTION 1 Settings Printer/Copier/Scanner User’s Guide OFF / LOW / MIDDLE / HIGH Select whether sounds are produced when a message appears in the message window, warning that it is almost time to replace consumables or a replaceable part. LOW CAUTION 2 Settings OFF / LOW / MIDDLE / HIGH Select whether sounds are produced when the user performs an incorrect operation.
Epson AcuLaser CX37 Series SLEEP MODE Settings Printer/Copier/Scanner User’s Guide 3-120 min (Default: 15 min) Enters Energy Save mode in order to conserve energy when no oper‐ ation is performed. Specify the length of time in minutes until the machine enters Energy Save mode.
Epson AcuLaser CX37 Series CALIBRATION Settings Printer/Copier/Scanner User’s Guide ON / OFF Select whether or not to perform image stabilization. If ON is selected, image stabilization is started. Note: The Calibration function consumes toner. PAPER SETUP Menu Note: Manufacturer’s default settings appear in bold.
Epson AcuLaser CX37 Series TRAY2 PAPER Printer/Copier/Scanner User’s Guide Media type PLAIN PAPER / THICK PAPER / THICK PAPER2 / LABELS / LETTERHEAD / GLOSSY / GLOSSY2 / SINGLE SIDE ONLY / SPECIAL PAPER / POSTCARD Paper size When a setting other than POSTCARD is selected: A4 / A5 / B5 / LETTER / G LETTER / STATEMENT / EXECUTIVE / CUSTOM When POSTCARD is selected: J-POSTCARD 100x148 / D-POSTCARD 148x200 / CUSTOM Select the type and size of the media loaded into Tray 2.
Epson AcuLaser CX37 Series PASSWORD SETTING Printer/Copier/Scanner User’s Guide ADMINISTRATOR NO. Specify the new administrator access code. FULL FUNC. NO. CHANGE FUNC. NO. Specify the function number for using restricted func‐ tions. This is the password for using the functions. RESTRICT Settings COLOR COPY ALLOW / RESTRICT Select whether or not to restrict the Color Copy func‐ tion.
Epson AcuLaser CX37 Series BOOTP*1 Settings Printer/Copier/Scanner User’s Guide DISABLE / ENABLE If there is a BOOTP server on the network, specify whether the IP address and other network information is automatically assigned by the BOOTP server. ARP/PING*1 Settings DISABLE / ENABLE Select whether or not the ARP/PING command is used when the IP address is assigned. HTTP*1 Settings DISABLE / ENABLE Select whether or not to enable HTTP.
Epson AcuLaser CX37 Series RAW PORT*1 DISABLE/ENABLE Settings Printer/Copier/Scanner User’s Guide DISABLE / ENABLE Select whether or not to enable the raw port. BIDIRECTIONAL Settings DISABLE / ENABLE Select whether or not to enable raw port bidirectional communication. SLP*1 Settings DISABLE / ENABLE Select whether or not to enable SLP. SNMP*1 Settings DISABLE / ENABLE Select whether or not to enable SNMP. WSD PRINT*1 Settings DISABLE / ENABLE Select whether or not to enable WSD printing.
Epson AcuLaser CX37 Series IPv6*1 DISABLE/ENABLE Settings Printer/Copier/Scanner User’s Guide DISABLE / ENABLE Select whether or not to enable IPv6. AUTO SETTING*2 Settings YES / NO Select whether or not to enable the IPv6 auto setting. NETWARE LINK LOCAL*2 Displays the link-local address. GLOBAL ADDRESS*2 Displays the global address. GATEWAY ADDRESS*2 Displays the gateway address. Settings DISABLE / ENABLE Select whether or not to enable NetWare.
Epson AcuLaser CX37 Series E-MAIL SETTING SMTP Settings Printer/Copier/Scanner User’s Guide DISABLE / ENABLE Select whether to enable or disable e-mail transmission operations for this machine. SENDER NAME Specify the name of the e-mail sender (up to 20 char‐ acters) used for network scanning. The default setting is Epson AL-CX37. E-MAIL ADDRESS Specify the e-mail address (up to 64 characters) of the e-mail sender used for network scanning.
Epson AcuLaser CX37 Series POP BEFORE SMTP DISABLE/ENABLE Settings Printer/Copier/Scanner User’s Guide DISABLE / ENABLE Select whether or not to enable POP Before SMTP. If ENABLE is selected, specify the time (between 0 and 60 seconds). The default setting is 1sec. POP3 SERVER ADDR.*3 Specify the host name or IP address for the POP3 server used for authentication with POP Before SMTP. The default setting is 0.0.0.0. POP3 PORT NO.
Epson AcuLaser CX37 Series LDAP SETTING DISABLE/ENABLE Settings Printer/Copier/Scanner User’s Guide DISABLE / ENABLE Select whether or not to enable the LDAP function. LDAP SERVER ADDR.*5 Specify the address (up to 64 characters) of the LDAP server. The default setting is 0.0.0.0. LDAP PORT NO.*5 Settings 1-65535 (Default: 389) Specify the port number of the LDAP server. Note: The default setting is 636 when SSL SETTING is set to ENABLE.
Epson AcuLaser CX37 Series MAX.SEARCH RESULTS*5 Settings Printer/Copier/Scanner User’s Guide 5-100 (Default: 100) Specify the maximum number of destinations dis‐ played after a search. AUTHENTICATION*5 Settings ANONYMOUS / SIMPLE / DIGEST-MD5 / GSS-SPNEGO / NTLMv2 Select the authentication method used for logging on to the LDAP server. LDAP ACCOUNT*5 Specify the account (up to 64 characters) used to con‐ nect to the LDAP server.
Epson AcuLaser CX37 Series USER SETTING PTT SETTING/COUNTRY SETTING Settings Printer/Copier/Scanner User’s Guide AUSTRIA / BELGIUM / CZECH / DENMARK / EUROPE / FINLAND / FRANCE / GERMANY / GREECE / HONG KONG / HUNGARY / IRELAND / ISRAEL / ITALY / KOREA / THE NETHERLANDS / NORWAY / POLAND / PORTUGAL / RUSSIA / SAUDI ARABIA / SLOVAKIA / SOUTH AFRICA / SPAIN / SWEDEN / SWITZERLAND / TAIWAN / TURKEY / U.S.A / UNITED KINGDOM Select the country where this machine is installed.
Epson AcuLaser CX37 Series SUPPLIES REPLACE FUSER UNIT Printer/Copier/Scanner User’s Guide Replace the counter when the fuser unit is replaced with new one. *1 This menu item appears when ADMIN. MANAGEMENT/NETWORK SETTING/TCP/IP is set to ENABLE. *2 This menu item appears when ADMIN. MANAGEMENT/NETWORK SETTING/IPv6/DISABLE/ENABLE is set to ENABLE. *3 This menu item appears when ADMIN. MANAGEMENT/E-MAIL SETTING/POP BEFORE SMTP/DISABLE/ENABLE is set to ENABLE. *4 This menu item appears when ADMIN.
Epson AcuLaser CX37 Series DENSITY LEVEL AUTO Settings (LIGHT) Printer/Copier/Scanner User’s Guide (DARK) Adjust the density of the background color. MANUAL Settings (DARK) (LIGHT) Specify the default copy density. SHARPNESS Settings (Soft) (Clear) Select the setting for SHARPNESS. OUTPUT PRIORITY Settings NON-SORT / SORT Select whether or not to sort copies by sets. N-UP PRIORITY Settings 1IN1 / 2IN1 / 4IN1 Select the number of document pages to be printed on a single page.
Epson AcuLaser CX37 Series ADF Color Monochrom e Printer/Copier/Scanner User’s Guide MIX, TEXT, PHOTO 300 × 300 dpi FINE/MIX, FINE/TEXT, FINE/PHOTO 600 × 300 dpi MIX, TEXT, PHOTO 600 × 300 dpi FINE/MIX, FINE/TEXT, FINE/PHOTO 600 × 300 dpi DIAL REGISTER/ADDRESS REGISTER Menu FAVORITE Frequently specified speed dial destinations and group dial destinations can be registered in the favorite list. Press the Addressbook key, and then press the u or d key to quickly select the desired destination.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide SCAN SETTING Menu Note: Manufacturer’s default settings appear in bold. IMAGE FORMAT Settings TIFF / PDF / JPEG Select the default format for saving files with scan to e-mail operations. Note: CODING METHOD ❏ PDF data can be opened in Adobe Acrobat Reader.
Epson AcuLaser CX37 Series FILE SIZE Settings Printer/Copier/Scanner User’s Guide NO SPLIT / SPLIT Select whether or not to limit the size for scan data sent as e-mail attachments. If SPLIT is selected, specify the maximum size between 1 and 10 Mb. If the data to be sent exceeds the maximum size allowed, the data is divided and sent as multiple attached files. Note: In order to receive multiple file attachments, an e-mail application compatible with divided transmissions is required.
Epson AcuLaser CX37 Series DELETE Printer/Copier/Scanner User’s Guide Follow the procedure described below to delete the selected job. 1.If a password has been specified for the selected job, type in the password, and then press the Select key. 2.Select YES, and then press the Select key. PAPER MENU Note: Manufacturer’s default settings appear in bold. ANY TRAY SETTING TRAY1 PAPER TRAY1 ANY SIZE Settings ON / OFF Select whether or not the Any Paper Size setting is selected for Tray 1.
Epson AcuLaser CX37 Series TRAY MAPPING TRAY MAPPING MD. Settings Printer/Copier/Scanner User’s Guide ON / OFF Select whether or not the Tray Mapping function is used. LOGICAL TRAY0 - LOGICAL TRAY9 Settings PHYSICAL TRAY1 / PHYSICAL TRAY2 / PHYSICAL TRAY3 Select the tray that is used for printing when a print job is received from another manufacturer’s printer driver. The default settings are PHYSICAL TRAY1 for LOGICAL TRAY1 and PHYSICAL TRAY2 for other trays.
Epson AcuLaser CX37 Series COLOR MODE Settings Printer/Copier/Scanner User’s Guide COLOR / GRAYSCALE If COLOR is selected, the pages are printed in full color. If GRAYSCALE is selected, the pages are printed in black and white. BRIGHTNESS Settings +15% / +10% / +5% / 0% / -5% / -10% / -15% The brightness of the printed image can be adjusted. HALFTONE IMAGE PRINTING Settings LINE ART / DETAIL / SMOOTH Select how halftones in images are reproduced.
Epson AcuLaser CX37 Series EDGE STRENGTH Settings Printer/Copier/Scanner User’s Guide OFF / LOW / MIDDLE / HIGH Select the desired amount that edges are emphasized. Note: If OFF is selected, the edges are not emphasized, even if an EDGE ENHANCEMENT menu item is set to ON. ECONOMY PRINT Settings ON / OFF Select whether to print graphics with a reduced density by reducing the amount of toner that is used. Note: If ON is selected, the edges are not emphasized, even if IMAGE PRINTING and GRFX.
Epson AcuLaser CX37 Series RGB INTENT Settings Printer/Copier/Scanner User’s Guide VIVID / PHOTOGRAPHIC Specify the characteristic applied when convert‐ ing RGB image data to CMYK data. If VIVID is selected, a vivid output is produced. If PHOTOGRAPHIC is selected, a brighter output is produced. RGB GRAY Settings COMPOSITE BLACK / BLACK AND GRAY / BLACK ONLY Specify how black and grays are reproduced in RGB image data. If COMPOSITE BLACK is selected, black is repro‐ duced using the CMYK colors.
Epson AcuLaser CX37 Series RGB INTENT Settings Printer/Copier/Scanner User’s Guide VIVID / PHOTOGRAPHIC Specify the characteristic applied when convert‐ ing RGB text data to CMYK data. If VIVID is selected, a vivid output is produced. If PHOTOGRAPHIC is selected, a brighter output is produced. RGB GRAY Settings COMPOSITE BLACK / BLACK AND GRAY / BLACK ONLY Specify how black and grays are reproduced in RGB text data. If COMPOSITE BLACK is selected, black is repro‐ duced using the CMYK colors.
Epson AcuLaser CX37 Series GRFX. PRINTING RGB SOURCE Settings Printer/Copier/Scanner User’s Guide DEVICE COLOR / sRGB Specify the color space for RGB graphics data. If DEVICE COLOR is selected, no color space is specified. RGB source profiles downloaded with the Web-Based EpsonNet Config are available as RGB SOURCE. RGB INTENT Settings VIVID / PHOTOGRAPHIC Specify the characteristic applied when convert‐ ing RGB graphics data to CMYK data. If VIVID is selected, a vivid output is produced.
Epson AcuLaser CX37 Series PS SETTINGS IMAGE PRINTING RGB SOURCE Settings Printer/Copier/Scanner User’s Guide DEVICE COLOR / sRGB / Ap‐ pleRGB / AdobeRGB1998 / Col‐ orMatchRGB / BlueAdjustRGB Specify the color space for RGB image data. If DEVICE COLOR is selected, no color space is specified. RGB source profiles downloaded with the Web-Based EpsonNet Config are available as RGB SOURCE.
Epson AcuLaser CX37 Series RGB GRAY Settings Printer/Copier/Scanner User’s Guide COMPOSITE BLACK / BLACK AND GRAY / BLACK ONLY Specify how black and grays are reproduced in RGB image data. If COMPOSITE BLACK is selected, black is repro‐ duced using the CMYK colors. If BLACK AND GRAY is selected, black and gray are reproduced using black only. If BLACK ONLY is selected, black is reproduced us‐ ing only black. DESTINATION PROF Settings AUTO Specify the destination profile.
Epson AcuLaser CX37 Series TEXT PRINTING RGB SOURCE Settings Printer/Copier/Scanner User’s Guide DEVICE COLOR / sRGB / Ap‐ pleRGB / AdobeRGB1998 / Col‐ orMatchRGB / BlueAdjustRGB Specify the color space for RGB text data. If DEVICE COLOR is selected, no color space is specified. RGB source profiles downloaded with the Web-Based EpsonNet Config are available as RGB SOURCE.
Epson AcuLaser CX37 Series RGB GRAY Settings Printer/Copier/Scanner User’s Guide COMPOSITE BLACK / BLACK AND GRAY / BLACK ONLY Specify how black and grays are reproduced in RGB text data. If COMPOSITE BLACK is selected, black is repro‐ duced using the CMYK colors. If BLACK AND GRAY is selected, black and gray are reproduced using black only. If BLACK ONLY is selected, black is reproduced us‐ ing only black. DESTINATION PROF Settings AUTO Specify the destination profile.
Epson AcuLaser CX37 Series GRFX. PRINTING RGB SOURCE Settings Printer/Copier/Scanner User’s Guide DEVICE COLOR / sRGB / Ap‐ pleRGB / AdobeRGB1998 / Col‐ orMatchRGB / BlueAdjustRGB Specify the color space for RGB graphics data. If DEVICE COLOR is selected, no color space is specified. RGB source profiles downloaded with the Web-Based EpsonNet Config are available as RGB SOURCE.
Epson AcuLaser CX37 Series RGB GRAY Settings Printer/Copier/Scanner User’s Guide COMPOSITE BLACK / BLACK AND GRAY / BLACK ONLY Specify how black and grays are reproduced in RGB graphics data. If COMPOSITE BLACK is selected, black is repro‐ duced using the CMYK colors. If BLACK AND GRAY is selected, black and gray are reproduced using black only. If BLACK ONLY is selected, black is reproduced us‐ ing only black. DESTINATION PROF Settings AUTO Specify the destination profile.
Epson AcuLaser CX37 Series SIMULATION SIMULATION PROF Settings Printer/Copier/Scanner User’s Guide NONE / SWOP / Euroscale / CommercialPress / JapanCol‐ or / TOYO / DIC Specify the simulation profile. If NONE is selected, no simulation profile is speci‐ fied. Simulation profiles downloaded with the Web-Based EpsonNet Config are available as SIMULATION PROF. SIM. INTENT Settings RELATIVE COLOR / ABSO‐ LUTE COLOR Specify the characteristic of the simulation profile.
Epson AcuLaser CX37 Series CALIBRATION TONE CALIBRATION Settings Printer/Copier/Scanner User’s Guide ON / OFF If ON is selected, image adjustments are applied. If OFF is selected, image adjustments are not applied. CMYK DENSITY CYAN / MAGENTA / YELLOW / BLACK HIGHLIGHT Settings +3 / +2 / +1 / 0 / -1 / -2 / -3 The density of the highlight color in images can be adjus‐ ted. MIDDLE Settings +3 / +2 / +1 / 0 / -1 / -2 / -3 The density of the middle color in images can be adjusted.
Epson AcuLaser CX37 Series EMULATION DEF. EMULATION Settings Printer/Copier/Scanner User’s Guide AUTO / POSTSCRIPT / PCL Specify the machine emulation language. If AUTO is selected, the machine automatically selects the machine emulation language from the data stream. POSTSCRIPT WAIT TIME OUT Settings 0-300 (Default: 0) Specify the time until an error is determined to be a Post‐ Script error. If 0 is selected, no timeout is performed.
Epson AcuLaser CX37 Series PCL CR/LF MAPPING Settings Printer/Copier/Scanner User’s Guide CR=CR LF=LF / CR=CRLF LF=LF / CR=CR LF=LFCR / CR=CRLF LF=LFCR Select the definitions of the CR/LF codes in the PCL lan‐ guage. LINES PER PAGE Settings 5-128 (Default: 60) Specify the number of lines per page in the PCL language. FONT SOURCE FONT NUMBER Settings 0-102 (Default: 0) Specify the default font in the PCL language. The font numbers that appear corre‐ spond to the PCL font list.
Epson AcuLaser CX37 Series PAPER DEFAULT PAPER PAPER SIZE Settings Printer/Copier/Scanner User’s Guide LETTER / LEGAL / EXECUTIVE / A4 / A5 / A6 / B5(JIS) / B6(JIS) / GOVT LET‐ TER / STATEMENT / FOLIO / SP FOLIO / UK QUARTO / FOOLSCAP / GOVT LE‐ GAL / 16K / PHOTO 4×6 / KAI 16 / KAI 32 / ENV C6 / ENV DL / ENV MON‐ ARCH / ENV CHOU#3 / ENV CHOU#4 / B5(ISO) / ENV #10 / JPOST 100x148 / JPOST-D 148x200 / 8 1/8x13 1/4 / 8 1/2x13 1/2 / CUSTOM Select the size of media that is normally used.
Epson AcuLaser CX37 Series HOLD JOB TIME OUT*1 Settings Printer/Copier/Scanner User’s Guide DISABLE / 1 hour / 4 hours / 1 day / 1 week Specify the length of time until print jobs saved on the hard disk are deleted. If DISABLE is selected, print jobs are not deleted at a specific time. HDD FORMAT*1 USER AREA ONLY Initialize the user area of the hard disk. When this menu item is selected, the machine is automatically restarted. ALL Initialize the hard disk.
Epson AcuLaser CX37 Series LIST OF FILES Printer/Copier/Scanner User’s Guide Select the file that you wish to output, and then press the Select key. If the file to be printed is in a folder, select the folder, and then press the Select key.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Chapter 3 Media Handling Print Media Specifications Media Tray*1 Duplex (double-sided) Copy Print FAX*2 Letter 1/2/3 Yes Yes Yes Yes Legal 1/3 Yes Yes*3 Yes*3 Yes Statement 1/2 No Yes Yes No Executive 1/2/3 Yes Yes No No A4 1/2/3 Yes Yes Yes Yes A5 1/2 No Yes Yes No A6 1/2 No No No No B5 (JIS) 1/2/3 Yes Yes Yes No B6 1/2 Yes No No No Folio 1 Yes Yes*3 Yes*4 No SP Folio 1 Yes
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Media Tray*1 Duplex (double-sided) Copy Print FAX*2 Kai 32 1/2 No No No No 8 1/2 x 13 1/2 1 Yes Yes*3 No No 8 1/8 x 13 1/4 1 Yes - No No J-Postcard 1/2 No Yes No No Double Postcard 1/2 No Yes No No B5 (ISO) 1 No No No No Envelope #10 1 No Yes No No Envelope DL 1 No Yes No No Envelope C6 1 No Yes No No Envelope Monarch 1 No Yes No No Envelope Chou #3 1 No Yes No No Envelope
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Plain Paper (Recycled Paper) Capacity Orientation Tray 1 Up to 100 sheets, depending on the paper weight. Tray 2 Up to 250 sheets, depending on the paper weight. Tray 3 Up to 500 sheets, depending on the paper weight. Tray 1 Face down Tray 2/3 Face up Driver Media Type Plain Paper (Recycled)) Weight 60–90 g/m² Duplexing See “Print Media” on page 88 for supported sizes.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide ❏ Layered ❏ Adhesive ❏ Folded, creased, curled, embossed, warped, or wrinkled ❏ Perforated, three-hole punched, or torn ❏ Too slick, too coarse, or too textured ❏ Different in texture (roughness) on the front and back ❏ Too thin or too thick ❏ Stuck together with static electricity ❏ Composed of foil or gilt; too luminous ❏ Heat sensitive or cannot withstand the fusing temperature (205˚C [401˚F]) ❏ Irregularly shaped (not rectangular or not cu
Epson AcuLaser CX37 Series Duplexing Printer/Copier/Scanner User’s Guide Not supported with copy functions Supported with printing functions DO NOT use thick stock that is ❏ Mixed with any other media in the trays (as this will cause media misfeeding) Envelope Print on the front (address) side only. Some parts of the envelope consist of three layers of paper—the front, back, and flap. Anything printed in these layered regions may be lost or faded. You can print continuously with envelope.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide ❏ Transparent windows ❏ Too rough of a surface ❏ Material that will melt, vaporize, offset, discolor, or emit dangerous fumes ❏ Been presealed Label A sheet of labels consists of a face sheet (the printing surface), adhesive, and a carrier sheet: ❏ The face sheet must follow the plain paper specification. ❏ The face sheet surface must cover the entire carrier sheet, and no adhesive should come through on the surface.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide ❏ Have backing sheets that have peeled away or have exposed adhesive Note: Labels may stick to the fuser, causing them to peel off and media misfeeds to occur. ❏ Are precut or perforated Do not use OK to use Shiny backed paper Full-page labels (uncut) Letterhead You can print continuously with letterhead. However, this could affect the media feed, depending on the media quality and printing environment.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Try printing your data on a sheet of plain paper first to check placement.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Note: If the postcard is warped, press on the warped area before putting it in the tray. Glossy Media Test all glossy media to ensure acceptable performance and to ensure that the image does not shift. You can print continuously with glossy media. However, this could affect the media feed, depending on the media quality and printing environment. If problems occur, stop the continuous printing and print one sheet at a time.
Epson AcuLaser CX37 Series Capacity Orientation Printer/Copier/Scanner User’s Guide Tray 1 Up to 100 sheets, depending on the paper weight. Tray 2 Up to 250 sheets, depending on the paper weight. Tray 3 Up to 500 sheets, depending on the paper weight.
Epson AcuLaser CX37 Series Weight 60–90 g/m² Duplexing Not supported with copy functions Supported with printing functions Printer/Copier/Scanner User’s Guide Use special paper that is ❏ Approved for laser printers DO NOT use special paper that is ❏ Not approved for use as plain paper Guaranteed Imageable (Printable) Area The printable area on all media sizes is up to 4.0 mm from the edges of the media. a a a a a=4.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Imageable Area—Envelopes Envelopes have a nonguaranteed imageable area that varies with envelope type. 1 a a a 2 3 a a=4.2 mm 1. Non-imageable area 2. Non-guaranteed imageable area 3. Guaranteed imageable area Note: ❏ The envelope print orientation is determined by your application. ❏ With the Envelope DL size (long edge feeding), the nonimageable areas on the left and right sides are 6 mm.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide When refilling media, first remove any media remaining in the tray. Stack it with the new media, even the edges, then reload it. Tray 1 (Manual Feed Tray) For details on the types and sizes of media that can be printed from Tray 1, refer to “Print Media” on page 88. 1. Open Tray 1. 2. Slide the media guides to provide more space between them.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 3. Press down on the center of the paper-lifting plate until the left and right locking tabs (white) lock into place. 4. Load the paper face down in the tray. Note: ❏ Do not load so much paper that the top of the stack is higher than the maximum limit guide. Up to 100 sheets (80 g/m² [22 lb]) of plain paper can be loaded into the tray at one time.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide ❏ For the maximum paper capacity for each paper source, see “Media Types” on page 89. ❏ Before loading envelopes, press them down to make sure that all air is removed, and make sure that the folds of the flaps are firmly pressed; otherwise the envelopes may become wrinkled or a media misfeed may occur. ❏ For envelopes with the flap along the long edge (Envelope C6, Envelope Monarch, and Envelope DL), load the envelopes with the flap side up.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Tray 2 1. Pull out Tray 2. 2. Press down the media pressure plate to lock it into place. 3. Slide the media guides to provide more space between them.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 4. Load the paper face up in the tray. Note: ❏ Do not load above the d mark. Up to 250 sheets (80 g/m² [22 lb]) of plain paper can be loaded into the tray at one time. ❏ For the maximum paper capacity for each paper source, see “Media Types” on page 89.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 5. Slide the media guides against the edges of the paper. 6. Close Tray 2. 7. Select PAPER SETUP/TRAY2 PAPER in the UTILITY menu, and then select the setting for the size and type of paper that are loaded. See also “Specifications” on page 88.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 500-Sheet Paper Cassette Unit (Tray 3) 1. Pull out Tray 3. 2. Press down the media pressure plate to lock it into place. 3. Slide the media guides to provide more space between them.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 4. Load the paper face up in the tray. Note: Do not load above the d mark. Up to 500 sheets (80 g/m² [22 lb]) of plain paper can be loaded into the tray at one time. 5. Slide the media guides against the edges of the paper.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 6. Close Tray 3. 7. Select PAPER SETUP/TRAY3 PAPER in the UTILITY menu, and then select the setting for the type of paper that is loaded. See also “Specifications” on page 88. Duplexing If the paper has low opacity (high translucency), then the printed data from one side of the page will show through to the other side. Check your application for margin information.
Epson AcuLaser CX37 Series 2 13 Printer/Copier/Scanner User’s Guide If “Short Edge (Bottom)” is selected, the pages will be laid out to flip at the bottom. 1 1 If “Long Edge (Left)” is selected, the pages will be laid out to flip at the side. 2 11 13 If “Long Edge (Right)” is selected, the pages will be laid out to flip at the right. 2 11 3 1 In addition, if “Print Type” has been set to “Booklet”, autoduplex printing is performed.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Output Tray All media is fed out facing down into the output tray on the machine. This tray has a capacity of approximately 150 sheets (A4/Letter) of plain paper, 80 g/m² or 10 sheets (A4/Letter) of special paper, 80 g/m². Note: ❏ If the media is stacked too high in the output tray, your printer may experience media misfeeds, excessive media curl, or static buildup. ❏ The output tray can be extended.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Original Media Specifications Documents that can be placed on the original glass The following types of documents can be placed on the original glass. Document type Sheets, books, three-dimentional object Document size A4 Maximum weight 3 kg Observe the following precautions when placing a document on the original glass. ❏ Do not place objects weighing more than 3 kg on the original glass; otherwise the glass may be damaged.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide ❏ Documents printed on paper thicker than 110 g/m² ❏ Documents with pages bound together with paper clips or staples ❏ Documents that are bound in a book or booklet ❏ Documents with pages bound together with glue ❏ Documents with pages that have had cutouts removed or are cutouts ❏ Label sheets ❏ Offset printing masters ❏ Documents with binder holes Loading a Document Placing a document on the original glass 1. Lift to open the ADF cover.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 2. Position the document on the original glass. Note: Align the document with the arrow on the left side toward the rear of the machine. 3. Gently close the ADF cover.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Loading a document into the ADF 1. Put the document into the ADF document feed tray face up. Note: ❏ Before loading a document into the ADF, check that no document pages remain on the original glass. ❏ Load the document pages so that the top of the document is toward the back or the right side of the machine. 2. Adjust the document guides to the document size.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Chapter 4 Using the Printer Driver Selecting Driver Options/Defaults (for Windows) Before you start working with your printer, you are advised to verify/change the default driver settings. Also, in case you have options installed, you should “declare” the options in the driver. 1. Choose the driver’s properties. 2. If you have installed options, proceed with the next step. Otherwise, skip to step 9. 3. Select the Configure tab. 4.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 8. Select the General tab. 9. Click Printing Preferences. Printing Preferences dialog box appears. 10. Select the default settings for your printer, such as the default media format you use, in the appropriate tabs. 11. Click Apply. 12. Click OK to exit from the Printing Preferences dialog box. 13. Click OK to exit from the Properties dialog box. Uninstalling the Printer Driver (for Windows) 1. Close all applications. 2.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Cancel Click to exit the Properties dialog box without saving any changes made. Apply Click to save all changes without exiting the Properties dialog box. Help Click to view the help. Favorite Setting This allows the current settings to be saved. To save the current settings, specify the desired settings, and then click Add. Specify the settings described below, and then click OK. ❏ Name: Type in the name of the settings to be saved.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Click the button to display a sample of the settings selected in the Quality tab. Note: This button appears only when the Quality tab is selected. ❏ Printer Information Click this button to start up Web-Based EpsonNet Config. Note: This button is available only if a network connection has been established. ❏ Default Click the button to reset the settings to their defaults.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide ❏ Add or remove displayed functions by clicking Edit My Tab. In addition, functions can be added to My Tab by right-clicking them on their original tabs.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Layout Tab The Layout tab allows you to ❏ Print several pages of a document on the same page (N-up printing) ❏ Print a single copy for enlargement and print several pages (PCL printer driver only) ❏ Specify booklet printing ❏ Rotate the print image 180 degrees ❏ Specify duplex (double-sided) printing ❏ Specify whether or not blank pages are printed (PCL printer driver only) ❏ Adjust the binding margin ❏ Adjust the printing position ❏ Specify t
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide ❏ Lighten the density of the watermark ❏ Print a frame around watermarks ❏ Print transparent (shaded) watermarks ❏ Print the watermark on only the first page ❏ Print the watermark repeatedly throughout the all pages The settings in the “Overlay” function of the Watermark/Overlay tab allows you to ❏ Select the form to use ❏ Add or delete overlay files ❏ Create a form (PCL printer driver only) ❏ Specify that the document and form are printed ove
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide ❏ Print using the printer’s fonts ❏ Control the tones of an image (Contrast) (PCL printer driver only) ❏ Specify the image compression method (PCL printer driver only) ❏ Select whether or not Auto Trapping function is used (Postscript printer driver only) ❏ Specify the Black Over Print function (Postscript printer driver only) ❏ Font substitution settings for TrueType fonts Other Tab The Other tab allows you to ❏ Select that Microsoft Excel s
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Chapter 5 Memory Direct Memory Direct PDF, XPS, JPEG and TIFF files saved on USB memory devices can be printed by plugging the USB memory device into the machine. Note: ❏ Memory direct can be used only if the optional Hard Disk Drive is installed. ❏ For details on specifying settings with the control panel, refer to “MEMORY PRINT Menu” on page 86. ❏ Encrypted USB memory devices are not supported.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Note: ❏ A maximum of 99 folders and files can be displayed. ❏ Up to 7 folder levels can be displayed. 5. Specify the desired print settings. Note: For details on memory direct, refer to “MEMORY PRINT Menu” on page 86. 6. Press the Start (Color) key or the Start (B&W) key to begin printing. Note: Do not unplug the USB memory device from the USB HOST port during memory direct printing.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Chapter 6 Using the Copier Making Basic Copies This section contains descriptions of the basic copy operation procedure and the functions that are frequently used when making copies, such as specifying the zoom ratio and the copy density. Note: ❏ The default paper size setting can be changed with PAPER SETUP in the UTILITY menu. For details, refer to “PAPER SETUP Menu” on page 52.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Note: If the number of copies was incorrectly entered, press the Back key, and then specify the correct number of copies. 5. To print color copies, press the Start (Color) key. To print monochrome copies, press the Start (B&W) key. Copying begins. Note: ❏ If the Stop/Reset key is pressed while copying, JOB CANCEL appears. To stop copying, select YES. To continue copying, select NO. ❏ If COLOR COPY in ADMIN.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Specifying the Copy Density 1. In the main screen (Copy mode), press the u or d key to select the current copy quality setting, and then press the Select key. 2. Press the u or d key to select DENSITY, and then press the Select key. 3. Press the l or r key to select the desired copy density, and then press the Select key. As the indicator is moved to right, the density becomes darker.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Specifying a Custom Zoom Ratio 1. In the main screen (Copy mode), press the u or d key to select the current zoom ratio setting, and then press the Select key. 2. Press the u or d key to select MANUAL, and then press the Select key. 3. Use the keypad (10 key) to type in the desired zoom ratio, or press the u or d key to specify the zoom ratio, and then press the Select key. Note: Each press of the u or d key changes the zoom ratio by 1%.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Setting 2in1/4in1 Copying If 2in1 copying is set, two document pages can be copied together onto a single page. If 4in1 copying is set, four document pages can be copied together onto a single page. 2in1/4in1 Copying From the ADF 1. In the main screen (Copy mode), press the u or d key to select the current page layout setting, and then press the Select key. 2. Press the u or d key to select select 2in1 or 4in1, and then press the Select key.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Note: In order to perform duplex (double-sided) copying or collated (Sort) copying with 2in1/4in1 copying, specify the necessary settings before performing step 4. For details, refer to “Setting Duplex (DoubleSided) Copying” on page 134 and “Setting Collated (Sort) Copying” on page 136. 5. When NEXT PAGE? appears in the message window, place the second document page on the original glass, and then press the Select key. 6.
Epson AcuLaser CX37 Series front side Printer/Copier/Scanner User’s Guide back side A B Note: The paper sizes that are available for ID card copying are A4, Letter and Legal. 1. Position the document on the original glass. Note: For details on positioning the document on the original glass, refer to “Placing a document on the original glass” on page 112. 2. In the main screen (Copy mode), press the u or d key to select the current copy function setting, and then press the Select key. 3.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Note: To print only the front sides that were scanned first, press the Start (Color) key or the Start (B&W) key in step 5. Repeat Copying With repeat copying, small documents, such as memos, are tiled and printed on a single page. 1. Position the document on the original glass. Note: For details on positioning the document on the original glass, refer to “Placing a document on the original glass” on page 112. 2.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Note: To change the document size, press the Back key to delete the current size, and then use the keypad to specify the desired size. Poster Copying With poster copying, the length and width of the scanned document are each enlarged 200%, and printed on four pages. Note: If the scanned image does not fit on the size of paper that is used, there may be margins on the sides of the image or the image may not fit in the paper. 1.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Setting Duplex (Double-Sided) Copying Duplex (Double-Sided) Copying From the ADF With duplex (double-sided) copying, two single-sided document pages can be scanned with the ADF and printed onto a single sheet of paper. 1. In the main screen (Copy mode), press the u or d key to select the current simplex/duplex (single-sided/double-sided) setting, and then press the Select key. 2.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 1. Position the document on the original glass. Note: For details on positioning the document on the original glass, refer to “Loading a Document” on page 112. 2. In the main screen (Copy mode), press the u or d key to select the current simplex/duplex (single-sided/double-sided) setting, and then press the Select key. 3. Press the u or d key to select 1-SIDE & 2-SIDE, and then press the Select key. 4.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Note: ❏ Duplex (double-sided) document copying can only be performed from the ADF. ❏ If you are making a large number of copies when copying a duplex document as a simplex document, you may not be able to copy if the memory becomes full. 1. In the main screen (Copy mode), press the u or d key to select the current simplex/duplex (single-sided/double-sided) setting, and then press the Select key. 2.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide The main screen (Copy mode) appears again. Collated (Sort) Copying From the Original Glass 1. Position the document on the original glass. Note: For details on positioning the document on the original glass, refer to “Placing a document on the original glass” on page 112. 2. In the main screen (Copy mode), press the u or d key to select the current Sort setting, and then press the Select key. 3.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Chapter 7 Using the Scanner Scanning From a Computer Application Documents can be scanned from a computer connected to this machine with a USB cable or via a network. Scanning settings can be specified and the scanning operation can be performed from TWAIN- or WIA-compatible applications. From the scanner driver, a preview can be displayed and various adjustments, such as the size of the scan area, can be specified.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Windows TWAIN Driver Settings ❏ Load Specify a saved settings file (dat file) for scanning. ❏ Save Save the current settings as a settings file (dat file). ❏ Default Return all settings to their defaults. ❏ Help icon Click to display the Help. ❏ About icon Click to display the software version information. ❏ Paper source With scanning documents from the Paper source. ❏ Original Size Specify the document size. ❏ Scan Type Specify the scan type.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Select Auto or Manual. When Manual is selected, a tab appears so that detailed settings can be specified, for example, for Brightness/Contrast and Filter. Note: ❏ The parameters that can be set differ depending on the scanning mode that is selected. ❏ If Auto is selected as the scanning mode, scanning from the original glass is performed after a prescan is performed so that a preview image can be checked.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide ❏ Clear icon Click to erase the preview image. ❏ Preview window Displays a preview image. Drag the rectangle over the image to select an area. ❏ Before/After (RGB) Move the pointer in the preview window to display the color tones at the pointer’s position before and after adjustments. ❏ Width/Height Displays the width and height for the selected area in the selected measurement units.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Click this message to display the Advanced Properties dialog box. In the Advanced Properties dialog box, settings can be specified for Brightness, Contrast, Resolution, and Picture type (select from color, grayscale or black and white). Note: These settings are applied when Custom Settings is selected. ❏ Page size Specify the paper size when Page source is set to Document Feeder. ❏ Preview window Displays a preview image.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide ❏ About icon Click to display the software version information. ❏ Paper source With scanning documents from the Paper source. ❏ Original Size Specify the document size. ❏ Scan Type Specify the scan type. ❏ Resolution Specify the resolution. ❏ Scale Specify the enlargement or reduction ratio for the selected area. Note: If the resolution is set at 1200 × 1200dpi or higher, a setting larger than 100% cannot be specified.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide ❏ Close Click to close the TWAIN driver window. ❏ Prescan Click to begin scanning a preview image. ❏ Scan Click to begin scanning. ❏ AutoCrop icon Click to automatically detect the scanning position based on the preview image. ❏ Zoom icon Click to rescan the area selected in the preview window and enlarge it to fit the window. ❏ Mirror icon Click to display a mirror image of the preview image.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Scanning With the Machine The machine keys can be used to make scans. This operation differs from scanning from a computer application since the destination of the scan data can also be specified. Note: If, while specifying settings, no key is pressed for the length of time specified for AUTO PANEL RESET, the entered settings are canceled and the main screen (Scan mode) is displayed. Basic Scanning Operation 1.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 6. Press the u or d key to select the size of the document positioned in step 5, and then press the Select key. 7. After all document pages have been scanned, press the Start key. The scanned document is sent to the specified location. Note: ❏ If the Stop/Reset key is pressed while scanning, JOB CANCEL appears. To continue scanning, select NO. To stop scanning, select YES.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Specifying the Destination Address (Scan to E-mail/FTP/SMB) Scan data can be sent via the network to a specified address (e-mail address, FTP address or SMB address). The address can be typed in directly, or an address registered on the machine can be selected. Note: ❏ To send scan data via the network, settings for NETWORK SETTING and E-MAIL SETTING (when sending to an e-mail address) must be specified.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Selecting From the Favorite List From the speed dial destinations and group dial destinations registered on this machine, register a maximum of 20 destinations in the favorite list for convenient access to frequently specified destinations. Follow the procedure described below to specify an address (e-mail address, FTP address or SMB address) from the favorite list as the recipient of the scan data.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 2. Use the keypad to type in the number (between 1 and 250) for the speed dial destination, and then press the Select key. The information registered for the speed dial destination appears for two seconds. 3. Press the Select key again. If an FTP address or an SMB address was selected, the destination address is specified. 4. If an e-mail address was selected, press the u or d key to select FINISH, and then press the Select key.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Selecting From the Address Book The speed dial destinations and group dial destinations registered on this machine are saved in the address book. Follow the procedure described below to specify an address (e-mail address, FTP address or SMB address) from the address book as the recipient of the scan data. Note: This feature is available only if data has been registered in the address book. 1.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 3. Use the keypad to type in the search keyword (maximum of 10 characters), and then press the Select key. The search begins, and the search results appear after a while. If no data matches the search keyword, NOT FOUND appears for about two seconds. Note: ❏ For details on entering/editing text, refer to Facsimile User’s Guide. ❏ Text starting with the first character of the maximum 10 characters is searched for.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 1. With the main screen (Scan mode) or Can Use AddressBook displayed, press the Addressbook key four times so that ADDRESS BOOK appears. 2. Press the u or d key to select LDAP SEARCH, and then press the Select key. 3. Press the u or d key to select NAME or E-MAIL, and then press the Select key. Note: To search registered names, select NAME. To search e-mail addresses, select E-MAIL. 4.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Specifying Multiple Destination Addresses A destination address can be added if a destination e-mail address is specified. Note: If an FTP address or an SMB address was selected, multiple destination addresses cannot be specified. 1. In the main screen (Scan mode), press the u or d key to select the current data destination setting, and then press the Select key. 2. Press the u or d key to select ADD, and then press the Select key. 3.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Note: For details on entering/editing text, refer to Facsimile User’s Guide. 5. To finish editing addresses, press the Back key. 6. Press the u or d key to select FINISH, and then press the Select key. Deleting a Specified Destination Address A specified destination address (e-mail address, FTP address or SMB address) can be deleted.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Note: ❏ Addresses can also be registered/edited with Web-Based EpsonNet Config or with Local Setup Program on the enclosed Software Disc. For details, refer to the Reference Guide. ❏ For Epson AcuLaser CX37DNF, the same settings menu used to register/edit fax numbers is used to register/edit addresses. For details on registering/editing fax numbers, refer to the Facsimile User’s Guide.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Deleting From the Favorite List Registered information can be deleted from the favorite list. Note: Changes made with this procedure will not be applied to the original data (speed dial destination, group dial destination, etc.). 1. In the main screen (Scan mode), press the u or d key to select UTILITY, and then press the Select key. 2. Press the u or d key to select DIAL REGISTER, and then press the Select key. 3.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 1. In the main screen (Scan mode), press the u or d key to select UTILITY, and then press the Select key. 2. Press the u or d key to select DIAL REGISTER, and then press the Select key. 3. Press the u or d key to select SPEED DIAL, and then press the Select key. 4. Use the keypad to type in the number (between 1 and 220) for the speed dial destination, and then press the Select key. 5.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 1. In the main screen (Scan mode), press the u or d key to select UTILITY, and then press the Select key. 2. Press the u or d key to select DIAL REGISTER, and then press the Select key. 3. Press the u or d key to select SPEED DIAL, and then press the Select key. 4. Use the keypad to type in the number (between 1 and 220) for the speed dial destination, and then press the Select key. 5.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 9. If desired, edit the registration name, and then press the Select key. 10. If desired, edit the e-mail address, and then press the Select key. The settings are registered, and the DIAL REGISTER menu appears again. Editing/Deleting Speed Dial Destinations Information registered as a speed dial destination can be edited or deleted.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Registering Group Dial Destinations An e-mail address can be registered with a group dial destination. A maximum of 20 group dial destinations can be registered. (A maximum of 50 e-mail addresses can be registered with one group.) Note: The addresses that can be registered as group dial destinations are limited to addresses registered as speed dial destinations or as other group dial destinations. 1.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 2. Press the u or d key to select DIAL REGISTER, and then press the Select key. 3. Press the u or d key to select GROUP DIAL, and then press the Select key. 4. Use the keypad to type in the number (between 1 and 20) for the group dial destination to be edited/deleted, and then press the Select key. The information currently registered for the group dial destination appears for about two seconds. 5.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Note: If the edited group dial destination is registered in the favorite list, a confirmation message asking whether or not to keep the destination registered as it is appears after the operation in step 12 is performed. To keep the destination registered as it is, select YES. To cancel the registration, select NO. Selecting the Data Format The data format for the scanned image can be selected. 1.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Selecting the Scan Mode 1. In the main screen (Scan mode), press the u or d key to select the current scan quality setting, and then press the Select key. 2. Press the u or d key to select MODE, and then press the Select key. 3. Press the u or d key to select MIX, TEXT or PHOTO and then press the Select key. The main screen (Scan mode) appears again. Selecting the Scan Density 1.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 1. In the main screen (Scan mode), press the u or d key to select the current simplex/duplex (single-sided/double-sided) setting, and then press the Select key. 2. Press the u or d key to select 2-SIDE, and then press the Select key. 3. Press the u or d key to select LONG EDGE or SHORT EDGE, and then press the Select key. The main screen (Scan mode) appears again.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 2. Press the u or d key to select BW Only or COLOR or GRAY, and then press the Select key. The main screen (Scan mode) appears again. Note: ❏ If JPEG is selected as the data format, the scan color is set to BW Only, and the data format is automatically set to PDF. ❏ Settings for SCAN SETTING/CODING METHOD in the UTILITY menu are available only if BW Only is selected.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 3. Press the u or d key to select YES, and then press the Select key. The main screen (Scan mode) appears again.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Chapter 8 Replacing Consumables and Maintenance Parts Note: ❏ Failure to follow instructions as outlined in this manual could result in voiding your warranty. ❏ If an error message (REPLACE TONER, Fuser Unit Life, etc.) appears, print out the configuration page, and then check the status of the other consumables. For details on the error messages, refer to “Error Messages” on page 231.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Type Parts Number Toner Cartridge (Yellow) 0590 Toner Cartridge (Magenta) 0591 Toner Cartridge (Cyan) 0592 Toner Cartridge (Black) 0593 Double Toner Cartridge (Black) 0594 Note: For optimum print quality and performance, use only the corresponded TYPE genuine Epson toner cartridges. Keep toner cartridges: ❏ In their packaging until you’re ready to install them. ❏ In a cool, dry location away from sunlight (due to heat).
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Replacing a Toner Cartridge Note: Be careful not to spill toner while replacing a toner cartridge. If toner spills, immediately wipe it off with a soft, dry cloth. If MACHINE SETTING/TONER EMPTY in the UTILITY menu is set to STOP, the message TONER LOW X (where “X”. represents the color of the toner) appears when toner cartridge becomes near empty. Follow the steps below to replace the toner cartridge. 1.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 4. Grab the handle of the toner cartridge to be replaced, and then pull out the cartridge. The following instructions show the procedure to replace the toner cartridge(Y). Note: Dispose of the used toner cartridge according to your local regulations. Do not burn the toner cartridge. For details, refer to “About Toner Cartridges” on page 167. 5. Check the color of the new toner cartridge to be installed. 6.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 7. Shake the cartridge to distribute the toner. 3Z 8. Peel off the protective film from the right side of the toner cartridge. 9. Make sure that the toner cartridge is the same color as the printer compartment, and then insert the toner cartridge into the printer. Note: Fully insert the toner cartridge.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 10. Pull the lever to the right to lock it in place. Note: ❏ The front lever should be securely returned to its original position; otherwise, the front cover of the printer cannot be closed. ❏ If it is difficult to operate the lever, push it in. 11. Make sure that the toner cartridge is securely installed, and then peel off the protective film.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 12. Close the front cover. Note: When closing the front cover, press the area of the cover with small projections.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Note: ❏ Do not touch the OPC drum surface. This could lower image quality. ❏ You are advised to replace the indicated photoconductor unit when the message P/U Life (X) (where “X” indicates the color of the photoconductor unit) appears. 1. Check the message window to see which color photoconductor unit needs replacing. 2. Open the printer’s front cover. 3. Pull the front lever of the color toner cartridge indicated to the left.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide The replacement procedure for the photoconductor unit is the same for all colors (yellow: Y, magenta: M, cyan: C, and black: K). The following instructions show the procedure to replace the toner cartridge (K). Y M C K 4. Grab the handle of the toner cartridge to be removed, and then pull out the cartridge. Note: Do not tilt removed toner cartridge, otherwise toner may spill.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 5. Pull up the waste toner bottle to unlock it. 6. Grab the left and right handles of the waste toner bottle, and then slowly pull out the bottle. Note: Do not tilt removed waste toner box, otherwise waste toner may spill. 7. While pressing down the area marked “Push” on the photoconductor unit to be replaced, slide the unit completely out of the printer.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide The following instructions show the procedure to replace the photoconductor unit (Black). Note: Dispose of the used photoconductor unit according to your local regulations. Do not burn the photoconductor unit. 8. Check the color of the new photoconductor unit to be installed. Note: In order to prevent toner from spilling, leave the photoconductor unit in the bag until step 7 is being performed. 9. Remove the photoconductor unit from the bag.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Note: Do not grab the bottom of the bag; otherwise, the photoconductor unit may be damaged, resulting in decreased print quality. 11. Remove the protective cover from the photoconductor unit. Remove all packing tape from the photoconductor unit. 12. Remove the paper from the photoconductor unit. Remove the protective cover from the photoconductor unit.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 13. Make sure that the new photoconductor unit to be installed is the same color as the printer compartment, and then insert the photoconductor unit into the printer so it locks. 14. Press in on the waste toner bottle until it locks into place. 15. Make sure that the toner cartridge is the same color as the printer compartment, and then insert the toner cartridge into the printer.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Note: Fully insert the toner cartridge. 16. Pull the lever to the right to lock it in place. Note: ❏ The front lever should be securely returned to its original position; otherwise, the front cover of the printer cannot be closed. ❏ If it is difficult to operate the lever, push it in. 17. Close the front cover.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Note: When closing the front cover, press the area of the cover with small projections. Replacing the Waste Toner Bottle (0595) When the waste toner bottle becomes full, the message WASTE TONER FULL/REPLACE BOTTLE appears in the message window. The printer stops and will not start again until the waste toner bottle is replaced. 1. Open the printer’s front cover.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 2. Pull up the waste toner bottle to unlock it. 3. Grab the left and right handles of the waste toner bottle, and then slowly pull out the bottle. Note: Do not tilt removed waste toner box, otherwise waste toner may spill. 4. Remove the new waste toner bottle from its packaging. Insert the used waste toner bottle into the plastic bag included in the box, and then box it up.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 5. Press in on the waste toner bottle until it locks into place. 6. Close the front cover. Note: ❏ When closing the front cover, press the area of the cover with small projections. ❏ If the waste toner bottle is not fully inserted, the front cover cannot be closed.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Replacing the Fuser Unit (3041/3042) When the time to replace the fuser unit is reached, the message Fuser Unit Life appears. Printing can continue even after this message appears; however, since the print quality is reduced, the fuser unit should be replaced immediately. 1. Turn off the printer and disconnect the power cord and interface cover. Note: There are extremely hot parts within the machine.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 4. Pull down the two blue levers. 5. Remove the fuser unit. 6. Prepare a new fuser unit. Note: Be careful not to touch the surface of the fuser roller.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 7. Lift up the 2 levers. 8. Remove the packing material. 9. Push down the 2 levers.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 10. Pull down the 2 levers of a new fuser unit. 11. Place the fuser unit on the metal plate section, and slide it into the printer until you feel it touch the back. 12. Lift up the two levers.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 13. Close the fuser unit cover. 14. Close the right door. Note: If the door cannot be closed, check that the fuser unit is fully inserted. 15. Reconnect the power cord, and turn on the printer. 16. Reset the counter with ADMIN. MANAGEMENT/SUPPLIES REPLACE/FUSER UNIT in the UTILITY menu.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Chapter 9 Maintenance Maintaining the Machine c Caution: Read all caution and warning labels carefully, making sure to follow any instructions contained in them. These labels are located on the inside of the machine’s covers and the interior of the machine body. Handle the machine with care to preserve its life. Abuse handling may cause damage and void your warranty.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide ❏ Always close the machine’s covers gently. Never subject the machine to vibration. ❏ Do not cover the machine immediately after using it. Turn it off and wait until it cools down. ❏ Do not leave the machine’s covers open for any length of time, especially in well-lit places; light may damage the photoconductor units. ❏ Do not open the machine during printing. ❏ Do not tap media stacks on the machine.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide ❏ Make sure any parts removed during cleaning are replaced before you plug in the machine. Cleaning the Machine c Caution: Be sure to turn off the machine and unplug the power cord before cleaning.
Epson AcuLaser CX37 Series ❏ Original Glass (a) ❏ Exposure Glass (b) b ❏ Printer/Copier/Scanner User’s Guide Original Cover Pad a Media Rollers The accumulation of paper dust and other debris on the media rollers can cause media-feeding problems. Cleaning the Media Feed Rollers (Manual Feed Tray) 1. Open Tray 1.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 2. Press down on the center of the paper-lifting plate until the left and right locking tabs (white) lock into place. 3. Clean the media feed rollers by wiping them with a soft, dry cloth. 4. Close the tray.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Cleaning the Media Feed Rollers (Tray 2/3) 1. Pull out the tray. 2. Clean the media feed rollers by wiping them with a soft, dry cloth. 3. Close the tray.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Cleaning the Media Transfer Rollers for Tray 3 1. Open the right side cover of Tray 3. Note: Before opening the right side cover of Tray 3, fold up Tray 1. 2. Clean the media transfer rollers by wiping them with a soft, dry cloth. 3. Close the right side cover of Tray 3.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Cleaning the Media Feed Rollers for the ADF 1. Open the ADF feed cover. 2. Clean the media feed rollers by wiping them with a soft, dry cloth. 3. Close the ADF feed cover.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Cleaning the Laser Lens This machine is constructed with four laser lenses. Clean all lenses as described below. The laser lens cleaning tool should be attached to the inside of the tray 2. 1. Pull out the tray 2. 2. Remove the cover. Note: Since the cover will be used later, do not return it to its original position.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 3. Remove the cleaning tool from the tray 2. 4. Close the tray 2. 5. Open the machine’s front cover. 6. Remove the waste toner bottle and the toner cartridge and photoconductor unit for the color of laser lens to be cleaned.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Note: ❏ For details on removing the toner cartridge, photoconductor unit or waste toner bottle, refer to “Replacing a Toner Cartridge” on page 169 or “Replacing a Photoconductor Unit” on page 173. ❏ Do not tilt removed toner cartridge, otherwise toner may spill. ❏ Do not tilt removed waste toner box, otherwise waste toner may spill. 7. Attach the cover removed in step 2 to the photoconductor unit. 8.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 9. Install the removed toner cartridge, photoconductor unit and waste toner bottle. Note: For details on installing the toner cartridge, photoconductor unit or waste toner bottle, refer to “Replacing a Toner Cartridge” on page 169 or “Replacing a Photoconductor Unit” on page 173. 10. Close the front cover. Note: When closing the front cover, press the area of the cover with small projections.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 11. Pull out the tray 2. 12. Return the laser lens cleaning tool to its holder on the inside of the tray 2. 13. Close the cover. 14. Close the tray 2. 15. Clean between each of the laser lenses in the same way. Note: The laser lens cleaning tool is included with the machine. Safely store the laser lens cleaning tool so that it will not be lost.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Chapter 10 Troubleshooting Printing a Configuration Page 1. In the main screen, press the u or d key to select REPORT/STATUS, and then press the Select key. 2. Press the u or d key to select REPORT, and then press the Select key. 3. Press the u or d key to select CONFIGURATION PAGE, and then press the Select key. 4. Press the Start (B&W) key or the Start (Color) key. Preventing Media Misfeeds Make sure that...
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Avoid... Allowing the output tray to overfill (the output tray has a 150 sheet capacity of plain paper or a 10 sheet capacity of special paper—misfeeding may occur if you allow more than 150 sheets of plain paper or 10 sheets of special paper to accumulate at one time). Clearing Media Misfeeds To avoid damage, always remove misfed media gently, without tearing it.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Media Misfeed Message Page Reference VERTICAL TRANS JAM OPEN RIGHT DOOR “Clearing a Media Misfeed in Tray 2” on page 206 DUPLEX LOWER JAM OPEN RIGHT DOOR “Clearing a Media Misfeed from the Duplex” on page 214 DUPLEX UPPER JAM OPEN RIGHT DOOR “Clearing a Media Misfeed from the Duplex” on page 214 MP TRAY JAM OPEN RIGHT DOOR “Clearing a Media Misfeed from Tray 1 (Manual Feed Tray) and Transfer Roller” on page 204 OUTPUT JAM OPEN RIGHT
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 2. Carefully pull out the misfed media. c Caution: The area around the fuser unit is extremely hot. Touching anything other than the indicated levers may result in burns. If you get burned, immediately cool the skin under cold water, and then seek professional medical attention. Note: Decreased print quality may result if the surface of the image transfer belt or the transfer roller is touched.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 3. Close the right door. Clearing a Media Misfeed in Tray 2 1. Pull the lever, and then open the right door. Note: Before opening the right door, fold up Tray 1.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 2. Carefully pull out the misfed media. c Caution: The area around the fuser unit is extremely hot. Touching anything other than the indicated levers may result in burns. If you get burned, immediately cool the skin under cold water, and then seek professional medical attention. Note: Decreased print quality may result if the surface of the image transfer belt or the transfer roller is touched.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 3. Close the right door. 4. Pull out Tray 2, and then remove all media from the tray.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 5. Fan the media you removed and then align it well. 6. Load the media face up in Tray 2. Note: ❏ Make sure that the media is flat. ❏ Do not load paper above the d mark. ❏ Slide the media guides against the edges of the media. 7. Close Tray 2.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Clearing a Media Misfeed in Tray 3 1. Open the right side cover of Tray 3. Note: Before opening the right side cover of Tray 3, fold up Tray 1. 2. Carefully pull out the misfed media. 3. Close the right side cover of Tray 3.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 4. Pull out Tray 3, and then remove all paper from the tray. 5. Fan the paper you removed and then align it well. 6. Load the paper face up in Tray 3. Note: ❏ Make sure that the paper is flat. ❏ Do not load paper above the d mark. ❏ Slide the media guides against the edges of the paper.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 7. Close Tray 3. Clearing a Media Misfeed from the ADF 1. Open the ADF feed cover. 2. Remove the document from the ADF document feed tray.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 3. Lift to open the ADF cover. 4. Remove any misfed media. Note: If the edge of the white leading sheet in the ADF comes out, insert it as it was before. 5. Close the ADF cover.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 6. Close the ADF feed cover. Clearing a Media Misfeed from the Duplex 1. Pull the lever, and then open the right door. Note: Before opening the right door, fold up Tray 1. 2. Carefully pull out the misfed media.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 3. Close the right door. Clearing a Media Misfeed from the Fuser Unit 1. Pull the lever, and then open the right door. Note: Before opening the right door, fold up Tray 1. 2. Lift up the two green levers.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 3. Holding the section with the green sticker (*) attached, open the fuser unit cover. 4. Carefully pull out the misfed media. Note: If the misfed media cannot be removed by pulling it down, pull it from the top of the fuser unit.
Epson AcuLaser CX37 Series c Printer/Copier/Scanner User’s Guide Caution: The area around the fuser unit is extremely hot. Touching anything other than the indicated levers may result in burns. If you get burned, immediately cool the skin under cold water, and then seek professional medical attention. Note: Decreased print quality may result if the surface of the image transfer belt or the transfer roller is touched. Be careful not to touch the surface of the image transfer belt or transfer roller.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 5. Close the fuser unit cover. 6. Push down the 2 levers. 7. Close the right door.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Solving Problems with Media Misfeeds Note: Frequent misfeeds in any area indicate that area should be checked, repaired, or cleaned. Repeated misfeeds may also happen if you’re using unsupported print media or original media. Symptom Cause Solution Several sheets go through the machine together. The front edges of the media are not even. Remove the media and even up the front edges, then reload it. The media is moist from humidity.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Symptom Cause Solution Media is misfeeding. The media is not correctly positioned in the tray. Remove the misfed media and reposition the media properly in the tray. The number of sheets in the tray exceeds the maximum allowed. Remove the excess media and reload the correct number of sheets in the tray. The media guides are not correctly adjusted to the media size. Adjust the media guides in the Tray 1 to match the size of the media.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Solving Other Problems Symptom Cause Solution Machine power is not on. The power cord is not correctly plugged into the outlet. Turn off the machine, confirm that the power cord is correctly plugged into the outlet, and then turn on the machine. Something is wrong with the outlet connected to the machine. Plug another electrical appliance into the outlet and see whether it operates properly.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Symptom Cause Solution Printing takes too much time. The machine is set to a slow printing mode (for example thick stock). It takes more time to print with special media. When using regular paper, make sure that the media type is set properly in the driver. The machine is set to power saving mode. It takes time for printing to start in power saving mode. The job is very complex. Wait. No action needed.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Symptom Cause Solution You are experiencing duplex problems. Media or settings are not correct. Make sure that you are using correct media. ❏ See “Specifications” on page 88. ❏ Do not duplex custom-sized media, envelopes, labels, postcards, letterhead, glossy media, or single side only paper. ❏ Make sure that you have not mixed media types in the tray. In the Windows printer driver (Layout/Print Type), choose Double-Sided.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Symptom Cause Solution When copying or scanning with the ADF, a horizontal band appears at the top or bottom of the image or paper (5 to 6 mm). A malfunction may have occurred while paper was being transferred with the ADF. If a band appears in the copy after copying, adjust a copy density setting. Scanned images are noisy. Resolution is set to 150x150dpi while the scan mode is set to MIX or TEXT. Set the scan mode to PHOTO.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Solving Problems with Printing Quality Symptom Cause Solution Nothing is printed, or there are blank spots on the printed page. One or more of the toner cartridges may be defective. Remove the toner cartridges and check if any is damaged. The media is moist from humidity. Adjust the humidity for media storage. Remove the moist media and replace it with new, dry media.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Symptom Cause Solution Image is too dark. The copy density is set too dark. Select a lighter copy density. The document was not pressed close enough against the original glass. Position the document so that it is pressed close enough against the original glass. For details on positioning the document on the original glass, refer to “Placing a document on the original glass” on page 112.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Symptom Cause Solution Irregular print or mottled image appears. The media is moist from humidity. Adjust the humidity in the media storage area. Unsupported media (wrong size, thickness, type, etc.) is being used. Use Epson-approved media. See “Specifications” on page 88. One or more of the toner cartridges may be defective. Remove the toner cartridges and check for damage. If it is damaged, replace it.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Symptom Cause Solution There are toner smudges on the back side of the page (whether or not it has been duplexed). The media path is dirty with toner. Print several blank sheets and the excess toner should disappear. One or more of the toner cartridges are defective. Remove the toner cartridges and check for damage. If it is damaged, replace it. One or more of the photoconductor units is defective.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Symptom Cause Solution Lateral lines or bands appear on image. The machine is not level. Place the machine on a flat, hard, level surface. The media path is dirty with toner. Print several sheets and the excess toner should disappear. One or more of the toner cartridges may be defective. Remove the toner cartridges and check for damage. If it is damaged, replace it. One or more of the photoconductor units is defective.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Status, Error, and Service Messages Status, error, and service messages are displayed in the message window. They provide information about your machine and help you locate many problems. When the condition associated with a displayed message has changed, the message is cleared from the window. Status Messages This message... means... Do this... ACCEPTED The settings were applied. No action needed.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Error Messages Note: For details on fax error messages, refer to the Facsimile User’s Guide. (Epson AcuLaser CX37DNF only) This message... means... Do this... ADDRESS IS TOO LONG The e-mail address retrieved from the LDAP server exceeds 64 characters. This machine can handle addresses containing no more than 64 bytes. Use a shorter address. CANNOT CONNECT xxx Server A connection with the specified server could not be established.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide This message... means... Do this... JOB CANCELED While a document was being scanned from the original glass in Scan mode, more than one minute had passed after the first page of the document was scanned or the data could not be sent. Therefore, the scan job was automatically canceled. Turn the machine off, and then, after waiting a few seconds, turn it on again.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide This message... means... Do this... NOT E-MAIL ADDRESS When the destination for the scan data was specified, a fax number registered in the favorite list or as a speed dial destination or group dial destination has been selected. Directly type in the destination for the scan data, or specify an e-mail address registered in the favorite list or as a speed dial destination or group dial destination.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide This message... means... Do this... PAPER SIZE ERROR RESET PAPER (xxx) Paper of the selected size is not loaded in a paper tray. Load paper of the selected size into a paper tray. PC CONNECTION FAILED While data was being sent in Scan mode, the connection to the computer was interrupted. Check the connection with the computer and the scanner driver status, and then try sending the data again.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide This message... means... Do this... USB MEMORY FULL There is no space available on the USB memory device connected to this machine. Delete data from the USB memory device to create free space, or use a different USB memory device. Waste Near Full The waste toner bottle will soon be full. Prepare a waste toner bottle. WASTE TONER FULL REPLACE BOTTLE The waste toner bottle is full. Replace the waste toner bottle.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Chapter 11 Installing Accessories Introduction Note: Use of accessories not manufactured or supported by Epson will void your warranty. Dual In-Line Memory Module (DIMM) 512 MB DIMM 500-Sheet Paper Cassette Unit (Tray 3) 500-sheet tray included Hard Disk Drive SATA Hard Disk Note: ❏ Installing accessories always requires that the machine and accessories are turned off and unplugged during installation.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Dual In-Line Memory Module (DIMM) Note: ❏ You may need additional memory (DIMM) for complex graphics and for duplex (double-sided) printing. ❏ This machine detects only half of the amount of the installed memory. Dual in-line memory module (or DIMM) is compact circuit board with surface-mount memory chips. The standard printer memory is 256 MB which can be expanded to a maximum of 768 MB. Copier memory is fixed at 128 MB.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 3. Using a coin, remove a screw. 4. Open the cover. 5. Insert the DIMM at an angle (about 45˚) into the connector, making sure that the notch on the unit aligns with the tab on connector, and then press down carefully until it clicks into place. Note: ❏ Be sure to handle the DIMM by the edges only.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide ❏ You will hear a click when the DIMM is properly placed. 6. Attach the cover, and then tighten the screw. 7. Close the rear cover. 8. Reconnect all interface cables. 9. Reconnect the power cord, and turn on the machine. 10. Declare the additional memory in the Windows printer driver (Properties/Configure tab). 11.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 2. Remove the rear cover. 3. Using a coin, remove a screw. 4. Open the cover.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 5. Attach Hard Disk Drive to the back of the cover. 6. Plug the two cables on the Hard Disk Drive into the connector. 7. Attach the cover, and then tighten the screw. 8. Close the rear cover. 9. Reconnect all interface cables. 10. Reconnect the power cord, and turn on the machine. 11. Declare the Hard Disk in the Windows printer driver (Properties/Configure tab).
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Installing a 500-Sheet Paper Cassette Unit Note: Since consumables are installed in the machine, be sure to keep the machine level when moving it in order to prevent accidental spills. 1. Turn off the machine and disconnect the power cord and interface cables. 2. Prepare the 500-Sheet Paper Cassette Unit. Note: Be sure to place the 500-Sheet Paper Cassette Unit on a level surface. 3.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 4. With another person’s help, place the machine on top of the 500-Sheet Paper Cassette Unit, making sure that the positioning pins on the 500-Sheet Paper Cassette Unit correctly fit into the holes on the bottom of the machine. w Warning: This machine weighs approximately 32.5 kg (71.6 lb) when it is fully loaded with consumables. The machine must be lifted by two people. 5. Close the right side cover of the 500-Sheet Paper Cassette Unit.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide 6. Stick the label to the front of the 550-Sheet Paper Cassette Unit as shown in the illustration below. Note: The label is supplied with the printer. 7. Reconnect all interface cables. 8. Reconnect the power cord, and turn on the machine. 9. Declare the Tray 3 in the Windows printer driver (Properties/Configure tab).
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Appendix A Appendix Technical Specifications Type Desktop (Tandem Full Color A4 laser beam printer-based all-in-one) Photoconductor OPC Luminous source LED Printing system Semiconductor laser beam scanning + dry-type electrophotographic method Developing system Dry mono-component SMT developing system Fusing system Lower free belt fusing system Resolution Copying: 600 × 600 dpi Scanning: 600 × 600 dpi, 600 × 300 dpi (when using A
Epson AcuLaser CX37 Series Paper/Media Printer/Copier/Scanner User’s Guide Plain paper (60 to 90 g/m²) Recycled paper(60 to 90 g/m²) Letterhead Envelopes Label Thick stock 1 (91 to 150 g/m²) Thick stock 2 (151 to 210 g/m²) Postcard Glossy 1 (100-128 g/m²) Glossy 2 (129-158 g/m²) Single side only (60 to 90 g/m²) Special paper (60 to 90 g/m²) Input capacity Tray 1 (manual feed tray) ❏ Plain/recycled paper: 100 sheets ❏ Envelopes: 10 envelopes ❏ Letterhead, labels, thick stock 1/2, postcard, glossy m
Epson AcuLaser CX37 Series Amperage Printer/Copier/Scanner User’s Guide AC 120 V: 8.2 A or less AC 220 to 240 V: 4.4 A or less Acoustic noise Standby: 33 dB or less Printing: 52.5 dB or less Copying: 53.5 dB or less External dimensions Height: 476 mm (18.7") Width: 421.5 mm (16.6") Depth: 544 mm (21.4") Note: Excluding some protruding parts and the manual feed tray. Weight 27.7 kg (61.0 lb) (without consumables) 32.5 kg (71.6 lb) (with consumables) Interface USB 2.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Appendix B Where To Get Help Contacting Epson Support Before Contacting Epson If your Epson product is not operating properly and you cannot solve the problem using the troubleshooting information in your product documentation, contact Epson support services for assistance. If Epson support for your area is not listed below, contact the dealer where you purchased your product.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Speak to a Support Representative Dial: (888) 377-6611, 6 am to 6 pm, Pacific Time, Monday through Friday. Support hours and days are subject to change without notice. Before you call, make sure you have your Unit ID number, which is included with the Epson Preferred Protection Plan information that came with your printer. You’ll also need your printer serial number and proof of purchase.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Help for Users in Europe Check your Pan-European Warranty Document for information on how to contact Epson support. Help for Users in Taiwan Contacts for information, support, and services are: World Wide Web (http://www.epson.com.tw) Information on product specifications, drivers for download, and products enquiry are available.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Telephone number Fax number Address 03-5325077 03-5320092 1F., No.9, Ln. 379, Sec. 1, Jingguo Rd., North Dist., Hsinchu City 300, Taiwan 04-23291388 04-23291338 3F., No.510, Yingcai Rd., West Dist., Taichung City 403, Taiwan 04-23805000 04-23806000 No.530, Sec. 4, Henan Rd., Nantun Dist., Taichung City 408, Taiwan 05-2784222 05-2784555 No.463, Zhongxiao Rd., East Dist., Chiayi City 600, Taiwan 06-2221666 06-2112555 No.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Epson Helpdesk Epson Helpdesk is provided as a final backup to make sure our clients have access to advice. Operators on the Helpdesk can aid you in installing, configuring and operating your Epson product. Our Pre-sales Helpdesk staff can provide literature on new Epson products and advise where the nearest dealer or service agent is located. Many types of queries are answered here.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide World Wide Web (http://www.epson.co.th) Information on product specifications, drivers for download, Frequently Asked Questions (FAQ), and e-mail are available.
Epson AcuLaser CX37 Series Fax Printer/Copier/Scanner User’s Guide (62) 21-572 4357 Epson Service Center Jakarta Mangga Dua Mall 3rd floor No 3A/B Jl. Arteri Mangga Dua, Jakarta Phone/Fax: (62) 21-62301104 Bandung Lippo Center 8th floor Jl. Gatot Subroto No.2 Bandung Phone/Fax: (62) 22-7303766 Surabaya Hitech Mall lt IIB No. 12 Jl. Kusuma Bangsa 116 – 118 Surabaya Phone: (62) 31-5355035 Fax: (62)31-5477837 Yogyakarta Hotel Natour Garuda Jl. Malioboro No.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Help for Users in Hong Kong To obtain technical support as well as other after-sales services, users are welcome to contact Epson Hong Kong Limited.
Epson AcuLaser CX37 Series Phone: 603-56288288 Fax: 603-56288388/399 Printer/Copier/Scanner User’s Guide Epson Helpdesk ❏ Sales enquiries and product information (Infoline) Phone: 603-56288222 ❏ Enquiries on repair services & warranty, product usage and technical support (Techline) Phone: 603-56288333 Help for Users in India Contacts for information, support, and services are: World Wide Web (http://www.epson.co.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Location Telephone number Fax number Cochin 0484-2357950 0484-2357950 Coimbatore 0422-2380002 NA Pune 020-30286000 /30286001/30286002 020-30286000 Ahmedabad 079-26407176 / 77 079-26407347 Helpline For Service, Product info or to order a cartridge - 18004250011 (9AM - 9PM) - This is a Toll-free number.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide ❏ Enquiries on repair service and warranty Where To Get Help 258
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide Index 2 2in1/4in1 copy...................................................................129 Duplex Copy.................................................................................134 Scan..................................................................................163 Duplexing...........................................................................108 5 500-Sheet Paper Cassette Unit........................................
Epson AcuLaser CX37 Series Letterhead.............................................................................94 Loading media.....................................................................99 M Machine Setting menu........................................................50 Maintenance.......................................................................189 Maintenance parts Fuser unit........................................................................184 Media Clearing misfeeds..............
Epson AcuLaser CX37 Series S Scan.....................................................................................146 Data format.....................................................................162 Delete queued transmission job...................................165 Duplex.............................................................................163 Resolution.......................................................................162 Scan color......................................................
