User`s guide

c
Caution:
❏ Do not force the memory module into the slot.
❏ Be sure to insert the memory module facing the correct way.
❏ You should not remove any modules from the circuit board. Otherwise, the printer will not
work.
5. Reattach the right side cover to the printer as shown below.
6. Tighten the screw on the back of the printer.
w
Warning:
Tighten the screw firmly to prevent the printer’s right side cover from the falling off when
moving the printer.
7. Reconnect the interface cable and power cord and turn the printer on.
Epson AcuLaser M7000 Series User's Guide
Installing Options 112