User`s guide

Cause What to do
The printer is in the sleep mode (the Wake Up/Sleep
button lights) or in the power off mode (the Wake Up/
Sleep button blinks).
Press the Wake Up/Sleep button to return the printer to ready
status.
The printer does not turn off
Cause What to do
The printer is in the power off mode (the Wake Up/Sleep
button blinks).
Wait for a while. The printer turns off in approximately 50 seconds.
To not enter the power off mode, set Power Off Timer to Off in
Energy Saver Menu on the control panel. See “Energy Saver
Menu” on page 82.
The printer does not print (Ready light off)
Cause What to do
The printer is offline.
Press the Start/Stop button once to switch the printer to ready
status. Make sure that the Ready light turns on.
Some error may have occurred. Check the LCD panel to see if an error message appears.
The printer is in the power off mode (the Wake Up/Sleep
button blinks).
Press the Wake Up/Sleep button to return the printer to ready
status.
To not enter the power off mode, set Power Off Timer to Off in
Energy Saver Menu on the control panel. See “Energy Saver
Menu” on page 82.
The Ready light is on but nothing prints
Cause What to do
Your computer may not be properly connected to the
printer.
Perform the procedure illustrated in the Setup Guide.
The interface cable may not be plugged in securely. Check both ends of the interface cable between the printer and
the computer.
Epson AcuLaser M7000 Series User's Guide
Troubleshooting 148