User`s guide

Password Config

Changes the password. Enter the old password first and then enter the new password twice.

To enter the password, press the d Down or u Up button to select the character and press the r Right

button to determine the character. After all characters are determined, press the OK button.

Note:

If you forget your password, contact your dealer. Note that when the password is initialized, the settings

and data stored on the printer are deleted. Depending on your environment, settings, such as network

connection settings, may need to be done again. We recommend making a note or backup of the

necessary data and setting information.

Limitation

Changes the restriction range. When Interface is selected, the password is required to change the

settings in the USB and Network menus. When Config is selected, the password is required to enter

Quick Print Job or Confidential Job, or to change the settings in all menus. When All is

selected, the password is required to enter Quick Print Job or Confidential Job, or to change

the settings and to perform the items in all menus. Before changing the setting, you have to enter the

password set in the Password Config setting.

Energy Saver Menu

Item Settings (default in bold)

Time to Sleep

1, 3, 5, 15, 30, 60, 120, 180, 240Min

Deep Sleep Mode

On, Off

Power Off Timer

On, Off

Time to Off

30, 60, 120, 180, 240, 360, 480Min

Timer Setting

Off, On

Start

0:00...8:00...23:59

Stop

0:00...18:00...23:59

Epson AcuLaser M7000 Series User's Guide

Using the Control Panel 82