user manual
Table Of Contents
- EPSON EPL-6200/EPL-6200L
- Contents
- Product Description
- 1.1 Outline
- 1.2 Basic Specifications
- 1.2.1 Process Specifications
- 1.2.2 Printer Basic Specifications
- 1.2.3 Paper Specification
- 1.2.4 Reliability, Durability, Serviceability
- 1.2.5 Operating Conditions (Including Consumables)
- 1.2.6 Storage and Transport of the Printer Main Unit and Optional Products (Consumables Packaged)
- 1.2.7 Electrical Features
- 1.2.8 Compliance with Standards and Regulations
- 1.2.9 Consumable Components
- 1.3 External Appearance and Parts Name
- 1.4 Controller Specification
- 1.5 Control Panel (EPL-6200)
- 1.6 Control Panel (EPL-6200L)
- 1.7 RAM Expansion
- 1.8 System Requirements (Only for EPL-6200L)
- 1.9 Paper Feed Specifications (Only for EPL-6200L)
- 1.10 Notes on Operation
- 1.11 Status Sheet
- 1.12 Ambient Conditions
- 1.13 Differences in Specifications between Intended Markets
- 1.14 Notes on Installation of Optional Units
- Operating Principles
- 2.1 Overview
- 2.2 Description of Mechanisms
- 2.3 Operating Principles of Electric Circuitry
- Troubleshooting
- 3.1 Overview
- 3.2 Troubleshooting When There is Error Display
- 3.2.1 Fuser warming up problem
- 3.2.2 Fan problem
- 3.2.3 Polygon Motor Error
- 3.2.4 Laser problem
- 3.2.5 High voltage circuit problem
- 3.2.6 Fuser high temperature problem
- 3.2.7 CPU Error
- 3.2.8 Engine Communication Error
- 3.2.9 Fuser low temperature problem
- 3.2.10 Standard RAM Error
- 3.2.11 RAM Error (Slot 0)
- 3.2.12 ROM Checksum Error (Font)
- 3.2.13 ROM Checksum Error (Program)
- 3.2.14 Option ROM Error
- 3.2.15 EEPROM Error
- 3.2.16 Engine Initialization Error
- 3.2.17 Other Hardware Error
- 3.2.18 Software Error
- 3.3 Troubleshooting for Paper Jam
- 3.4 Troubleshooting for Abnormal Operations
- 3.5 Troubleshooting for Electrical Parts
- 3.6 Troubleshooting for Print Quality Problems
- Disassembly and Assembly
- Adjustment
- Maintenance
- Appendix
EPSON EPL-6200/EPL-6200L Revision A
Troubleshooting Troubleshooting for Paper Jam 116
3.3 Troubleshooting for Paper Jam
3.3.1 Initial Checking
If any paper jam has occurred, check the initial check items as listed below first.
3.3.2 Locations of Paper Jam Detection Sensors
Figure 3-3. EPL-6200 (with Optional Units installed)
Figure 3-4. EPL-6200L
Table 3-22. Initial Check Items
Check Item Remedy
Is a specified type of paper used? Replace the paper.
Is paper curled, wrinkled, or wet?
Replace the paper.
Tell the customer how to store paper.
Is the paper path free from foreign matters, dirt or
deformation?
Clean the paper path or replace
relevant parts.
Is the Separation Claw free from dirt, deformation or
wear?
Replace the fuser unit.
Are the rollers free from dirt, deformation or wear? Clean or replace the relevant roller.
Is the paper size consistent with the restraint plates? Ensure consistency.
Do the actuators operate normally?
Repair or replace the relevant
actuator.
C H E C K
P O I N T
Open and close the Front Cover to reset the printer after correction
of a paper jam.
Eject Sensor (PS3)
Duplex Unit Upper
Transport Sensor (PC4)
Duplex Unit Lower
Transport Sensor (PC5)
Paper Feed
Sensor (S1)
Eject Sensor (PS3)
Paper Feed Sensor (S1)