user manual
Table Of Contents
- EPSON EPL-6200/EPL-6200L
- Contents
- Product Description
- 1.1 Outline
- 1.2 Basic Specifications
- 1.2.1 Process Specifications
- 1.2.2 Printer Basic Specifications
- 1.2.3 Paper Specification
- 1.2.4 Reliability, Durability, Serviceability
- 1.2.5 Operating Conditions (Including Consumables)
- 1.2.6 Storage and Transport of the Printer Main Unit and Optional Products (Consumables Packaged)
- 1.2.7 Electrical Features
- 1.2.8 Compliance with Standards and Regulations
- 1.2.9 Consumable Components
- 1.3 External Appearance and Parts Name
- 1.4 Controller Specification
- 1.5 Control Panel (EPL-6200)
- 1.6 Control Panel (EPL-6200L)
- 1.7 RAM Expansion
- 1.8 System Requirements (Only for EPL-6200L)
- 1.9 Paper Feed Specifications (Only for EPL-6200L)
- 1.10 Notes on Operation
- 1.11 Status Sheet
- 1.12 Ambient Conditions
- 1.13 Differences in Specifications between Intended Markets
- 1.14 Notes on Installation of Optional Units
- Operating Principles
- 2.1 Overview
- 2.2 Description of Mechanisms
- 2.3 Operating Principles of Electric Circuitry
- Troubleshooting
- 3.1 Overview
- 3.2 Troubleshooting When There is Error Display
- 3.2.1 Fuser warming up problem
- 3.2.2 Fan problem
- 3.2.3 Polygon Motor Error
- 3.2.4 Laser problem
- 3.2.5 High voltage circuit problem
- 3.2.6 Fuser high temperature problem
- 3.2.7 CPU Error
- 3.2.8 Engine Communication Error
- 3.2.9 Fuser low temperature problem
- 3.2.10 Standard RAM Error
- 3.2.11 RAM Error (Slot 0)
- 3.2.12 ROM Checksum Error (Font)
- 3.2.13 ROM Checksum Error (Program)
- 3.2.14 Option ROM Error
- 3.2.15 EEPROM Error
- 3.2.16 Engine Initialization Error
- 3.2.17 Other Hardware Error
- 3.2.18 Software Error
- 3.3 Troubleshooting for Paper Jam
- 3.4 Troubleshooting for Abnormal Operations
- 3.5 Troubleshooting for Electrical Parts
- 3.6 Troubleshooting for Print Quality Problems
- Disassembly and Assembly
- Adjustment
- Maintenance
- Appendix
EPSON EPL-6200/EPL-6200L Revision A
Troubleshooting Troubleshooting for Print Quality Problems 124
3.6.1 Blank Print or Solid Black
Description of the problem:
Printed page is completely white or
completely black.
Parts that may be the source of this error
PH Unit (p.154)
Imaging Cartridge
(Developer Cartridge / Photoconductor
Unit) (
p.135)
High Voltage Unit (HV1) (p.151)
Main Board Assy (C533/C534 Main)
(p.146)
Step Action and Question Yes No
1
♦Is the problem Blank Print (All White)? Check
connection of
connector on
the PH unit.
Go to Step 2
2
Imaging Cartridge 1
♦Is the coupling of the Imaging Cartridge drive
made properly?
Go to Step 3
Correct the drive
transmission
coupling or
replace the
Imaging
Cartridge
(Photoconductor
Unit and
Developer
Cartridge).
3
Imaging Cartridge 2
♦Are the charging voltage contact of the Imaging
Cartridge and the OPC drum grounding contact
set properly?
Go to Step 4
Check, clean or
correct the
contacts.
4
High voltage unit (HV1)
♦Is the connector of the High Voltage Unit (HV1)
connected properly?
Go to Step 5
Connect
properly.
5
♦Was the problem solved after any of the Steps
above?
Problem
solved
Replace the high
voltage unit
(HV1).
Replace the
Main Board
Assy.
Replace the PH
unit.
Step Action and Question Yes No