user manual
Table Of Contents
- EPSON EPL-6200/EPL-6200L
- Contents
- Product Description
- 1.1 Outline
- 1.2 Basic Specifications
- 1.2.1 Process Specifications
- 1.2.2 Printer Basic Specifications
- 1.2.3 Paper Specification
- 1.2.4 Reliability, Durability, Serviceability
- 1.2.5 Operating Conditions (Including Consumables)
- 1.2.6 Storage and Transport of the Printer Main Unit and Optional Products (Consumables Packaged)
- 1.2.7 Electrical Features
- 1.2.8 Compliance with Standards and Regulations
- 1.2.9 Consumable Components
- 1.3 External Appearance and Parts Name
- 1.4 Controller Specification
- 1.5 Control Panel (EPL-6200)
- 1.6 Control Panel (EPL-6200L)
- 1.7 RAM Expansion
- 1.8 System Requirements (Only for EPL-6200L)
- 1.9 Paper Feed Specifications (Only for EPL-6200L)
- 1.10 Notes on Operation
- 1.11 Status Sheet
- 1.12 Ambient Conditions
- 1.13 Differences in Specifications between Intended Markets
- 1.14 Notes on Installation of Optional Units
- Operating Principles
- 2.1 Overview
- 2.2 Description of Mechanisms
- 2.3 Operating Principles of Electric Circuitry
- Troubleshooting
- 3.1 Overview
- 3.2 Troubleshooting When There is Error Display
- 3.2.1 Fuser warming up problem
- 3.2.2 Fan problem
- 3.2.3 Polygon Motor Error
- 3.2.4 Laser problem
- 3.2.5 High voltage circuit problem
- 3.2.6 Fuser high temperature problem
- 3.2.7 CPU Error
- 3.2.8 Engine Communication Error
- 3.2.9 Fuser low temperature problem
- 3.2.10 Standard RAM Error
- 3.2.11 RAM Error (Slot 0)
- 3.2.12 ROM Checksum Error (Font)
- 3.2.13 ROM Checksum Error (Program)
- 3.2.14 Option ROM Error
- 3.2.15 EEPROM Error
- 3.2.16 Engine Initialization Error
- 3.2.17 Other Hardware Error
- 3.2.18 Software Error
- 3.3 Troubleshooting for Paper Jam
- 3.4 Troubleshooting for Abnormal Operations
- 3.5 Troubleshooting for Electrical Parts
- 3.6 Troubleshooting for Print Quality Problems
- Disassembly and Assembly
- Adjustment
- Maintenance
- Appendix
EPSON EPL-6200/EPL-6200L Revision A
Product Description Outline 14
CONTROLLER FEATURES
<EPL-6200>
High-speed controller
CPU : TMPR4955BFG 200 MHz (Same as for EPL-N2500)
RAM : 8 MB fitted as standard RAM and Expandable up to 136 MB
Max.
Exclusive RAM DIMM for EPSON (Same as for EPL-6100)
Equipped with one Type B interface slot (Level 3 supported)
Two standard interfaces
IEEE1284 parallel interface
USB interface
Real 1200dpi supported
(Only in ESC/Page, PCL6, PostScript 3. Up to 600 dpi supported in other modes)
NOTE:
1200 dpi printing needs much memory. At 1200 dpi printing,
therefore, the possibility of running short of memory is high with
standard memory.
Recommendation: Extension of 16 MB or more.
EnhancedMicroGray installed (available only in 600 dpi and 300 dpi.
Automatically switched off when 1200 dpi is selected.)
RITech installed (available only in 600 dpi and 300 dpi. Automatically switched
off when 1200 dpi is selected.)
PCL6 emulation is installed as a standard feature.
Adobe PostScript3 is installed as a standard feature.
No optional ROM DIMM slot.
<EPL-6200L>
Host-based controller
CPU : EPSON 32 bit RISC S1C33000 48 MHz
RAM : Standard RAM is 2 MB
RAM can be not expanded.
Two standard interfaces
IEEE1284 compatible parallel interface supporting ECP.
USB interface (USB revision 1.1, supporting USB ID).
Data compression technology
Sending compressed data from a host computer allows printing most of the
data with only standard memory.
An expanded circuit hardware provides high-speed processing.
No toner save mode
No 300 dpi mode
No RITech or PGI (EnhancedMicroGray)