user manual
Table Of Contents
- EPSON EPL-6200/EPL-6200L
- Contents
- Product Description
- 1.1 Outline
- 1.2 Basic Specifications
- 1.2.1 Process Specifications
- 1.2.2 Printer Basic Specifications
- 1.2.3 Paper Specification
- 1.2.4 Reliability, Durability, Serviceability
- 1.2.5 Operating Conditions (Including Consumables)
- 1.2.6 Storage and Transport of the Printer Main Unit and Optional Products (Consumables Packaged)
- 1.2.7 Electrical Features
- 1.2.8 Compliance with Standards and Regulations
- 1.2.9 Consumable Components
- 1.3 External Appearance and Parts Name
- 1.4 Controller Specification
- 1.5 Control Panel (EPL-6200)
- 1.6 Control Panel (EPL-6200L)
- 1.7 RAM Expansion
- 1.8 System Requirements (Only for EPL-6200L)
- 1.9 Paper Feed Specifications (Only for EPL-6200L)
- 1.10 Notes on Operation
- 1.11 Status Sheet
- 1.12 Ambient Conditions
- 1.13 Differences in Specifications between Intended Markets
- 1.14 Notes on Installation of Optional Units
- Operating Principles
- 2.1 Overview
- 2.2 Description of Mechanisms
- 2.3 Operating Principles of Electric Circuitry
- Troubleshooting
- 3.1 Overview
- 3.2 Troubleshooting When There is Error Display
- 3.2.1 Fuser warming up problem
- 3.2.2 Fan problem
- 3.2.3 Polygon Motor Error
- 3.2.4 Laser problem
- 3.2.5 High voltage circuit problem
- 3.2.6 Fuser high temperature problem
- 3.2.7 CPU Error
- 3.2.8 Engine Communication Error
- 3.2.9 Fuser low temperature problem
- 3.2.10 Standard RAM Error
- 3.2.11 RAM Error (Slot 0)
- 3.2.12 ROM Checksum Error (Font)
- 3.2.13 ROM Checksum Error (Program)
- 3.2.14 Option ROM Error
- 3.2.15 EEPROM Error
- 3.2.16 Engine Initialization Error
- 3.2.17 Other Hardware Error
- 3.2.18 Software Error
- 3.3 Troubleshooting for Paper Jam
- 3.4 Troubleshooting for Abnormal Operations
- 3.5 Troubleshooting for Electrical Parts
- 3.6 Troubleshooting for Print Quality Problems
- Disassembly and Assembly
- Adjustment
- Maintenance
- Appendix
EPSON EPL-6200/EPL-6200L Revision A
Disassembly and Assembly Duplex Unit (Option) 164
4.7.4 Duplex Unit Inversion Motor
1. Remove the Duplex Unit.
2. Remove the Left Cover.
3. Disconnect the one connector.
(See Figure 4-53)
4. Remove the two screws, and remove the Duplex Unit Inversion Motor.
4.7.5 Duplex Unit Transport Motor
1. Remove the Duplex Unit.
2. Remove the Left Cover.
3. Disconnect the one connector.
(See Figure 4-54)
4. Remove the two screws, and remove the Duplex Unit Transport Motor Assy.
5. Remove the Duplex Unit Transport Motor.
4.7.6 Duplex Unit Skew Correction Solenoid
1. Remove the Duplex Unit.
2. Remove the Left Cover.
3. Disconnect the one connector.
(See Figure 4-55)
4. Remove the one screw, and remove the Duplex Unit Skew Correction Solenoid.
Figure 4-53. Removing the Duplex Unit Inversion Motor
Figure 4-54. Removing the Duplex Unit Transport Motor
Figure 4-55. Removing the Duplex Unit Skew Correction Solenoid
OPT_DupSol01.eps