user manual
Table Of Contents
- EPSON EPL-6200/EPL-6200L
- Contents
- Product Description
- 1.1 Outline
- 1.2 Basic Specifications
- 1.2.1 Process Specifications
- 1.2.2 Printer Basic Specifications
- 1.2.3 Paper Specification
- 1.2.4 Reliability, Durability, Serviceability
- 1.2.5 Operating Conditions (Including Consumables)
- 1.2.6 Storage and Transport of the Printer Main Unit and Optional Products (Consumables Packaged)
- 1.2.7 Electrical Features
- 1.2.8 Compliance with Standards and Regulations
- 1.2.9 Consumable Components
- 1.3 External Appearance and Parts Name
- 1.4 Controller Specification
- 1.5 Control Panel (EPL-6200)
- 1.6 Control Panel (EPL-6200L)
- 1.7 RAM Expansion
- 1.8 System Requirements (Only for EPL-6200L)
- 1.9 Paper Feed Specifications (Only for EPL-6200L)
- 1.10 Notes on Operation
- 1.11 Status Sheet
- 1.12 Ambient Conditions
- 1.13 Differences in Specifications between Intended Markets
- 1.14 Notes on Installation of Optional Units
- Operating Principles
- 2.1 Overview
- 2.2 Description of Mechanisms
- 2.3 Operating Principles of Electric Circuitry
- Troubleshooting
- 3.1 Overview
- 3.2 Troubleshooting When There is Error Display
- 3.2.1 Fuser warming up problem
- 3.2.2 Fan problem
- 3.2.3 Polygon Motor Error
- 3.2.4 Laser problem
- 3.2.5 High voltage circuit problem
- 3.2.6 Fuser high temperature problem
- 3.2.7 CPU Error
- 3.2.8 Engine Communication Error
- 3.2.9 Fuser low temperature problem
- 3.2.10 Standard RAM Error
- 3.2.11 RAM Error (Slot 0)
- 3.2.12 ROM Checksum Error (Font)
- 3.2.13 ROM Checksum Error (Program)
- 3.2.14 Option ROM Error
- 3.2.15 EEPROM Error
- 3.2.16 Engine Initialization Error
- 3.2.17 Other Hardware Error
- 3.2.18 Software Error
- 3.3 Troubleshooting for Paper Jam
- 3.4 Troubleshooting for Abnormal Operations
- 3.5 Troubleshooting for Electrical Parts
- 3.6 Troubleshooting for Print Quality Problems
- Disassembly and Assembly
- Adjustment
- Maintenance
- Appendix
EPSON EPL-6200/EPL-6200L Revision A
Product Description Basic Specifications 32
1.2.9 Consumable Components
1.2.9.1 Specifications
Note “*1”: The number of sheets is the approximate number of printable images using A4
portrait continuous printing at 5% image occupation rate. The cartridge life varies
according to the image occupation rate and type of printing (continuous,
intermittent, printing density, and toner save mode).
“*2”: The external shape varies with the lives and intended markets.
1.2.9.2 Packing Storage and Transport Environments
Temperature and Humidity Conditions
Transportation Barometric Pressure
Conforms to the same requirements as for the main unit.
61.3 ~ 101.3 kPa or more (460 ~ 760 mmHg)
Dropping
No abnormalities according to JIS Z0200-1998 Level 1
Vibration
Frequency: 5 ~ 100Hz (Sweep time: 5 minutes)
Acceleration: 1G
Direction of application: 3 dimensional
Time of application: 60 minutes along each X, Y, Z axis,
180 minutes in total
Table 1-34. Consumable Specifications
Name Contents Life*
1
Size
(mm)
Weight
(kg)
Initial
Filling
(g)
Developer
Cartridge
(toner
cartridge)
• Developer,
Toner hopper
• Black, single
component,
nonmagnetic toner
Pre-installed (EPL-6200):
3,000 sheets
*2
on an
average
(w) 275
(D) 97
(H)
0.4
44.5 g
±5 g
Pre-installed (EPL-6200L):
1,500 sheets
*2
on an
average
0.4
85 g
±5 g
Replaced:
3,000 or 6,000 sheets
*2
on
an average
0.5
152 g
±5 g
Photocond
uctor Unit
(Drum
Cartridge)
• OPC drum
(organic
photoconductor)
• Charger
(Rotary Brush +
Precharging Film)
20,000 sheets on an
average
(w) 292
(D) 155
(H) 91
0.5 -
Table 1-35. Temperature and Humidity Conditions
Conditions Temperature Humidity Warranty Period
Normal 0
∼35°C30∼85% 18 months
Severe
High 35 ∼40°C 85∼95%
1/30 of warranty
period
Low -20
∼0°C10∼30%