user manual
Table Of Contents
- EPSON EPL-6200/EPL-6200L
- Contents
- Product Description
- 1.1 Outline
- 1.2 Basic Specifications
- 1.2.1 Process Specifications
- 1.2.2 Printer Basic Specifications
- 1.2.3 Paper Specification
- 1.2.4 Reliability, Durability, Serviceability
- 1.2.5 Operating Conditions (Including Consumables)
- 1.2.6 Storage and Transport of the Printer Main Unit and Optional Products (Consumables Packaged)
- 1.2.7 Electrical Features
- 1.2.8 Compliance with Standards and Regulations
- 1.2.9 Consumable Components
- 1.3 External Appearance and Parts Name
- 1.4 Controller Specification
- 1.5 Control Panel (EPL-6200)
- 1.6 Control Panel (EPL-6200L)
- 1.7 RAM Expansion
- 1.8 System Requirements (Only for EPL-6200L)
- 1.9 Paper Feed Specifications (Only for EPL-6200L)
- 1.10 Notes on Operation
- 1.11 Status Sheet
- 1.12 Ambient Conditions
- 1.13 Differences in Specifications between Intended Markets
- 1.14 Notes on Installation of Optional Units
- Operating Principles
- 2.1 Overview
- 2.2 Description of Mechanisms
- 2.3 Operating Principles of Electric Circuitry
- Troubleshooting
- 3.1 Overview
- 3.2 Troubleshooting When There is Error Display
- 3.2.1 Fuser warming up problem
- 3.2.2 Fan problem
- 3.2.3 Polygon Motor Error
- 3.2.4 Laser problem
- 3.2.5 High voltage circuit problem
- 3.2.6 Fuser high temperature problem
- 3.2.7 CPU Error
- 3.2.8 Engine Communication Error
- 3.2.9 Fuser low temperature problem
- 3.2.10 Standard RAM Error
- 3.2.11 RAM Error (Slot 0)
- 3.2.12 ROM Checksum Error (Font)
- 3.2.13 ROM Checksum Error (Program)
- 3.2.14 Option ROM Error
- 3.2.15 EEPROM Error
- 3.2.16 Engine Initialization Error
- 3.2.17 Other Hardware Error
- 3.2.18 Software Error
- 3.3 Troubleshooting for Paper Jam
- 3.4 Troubleshooting for Abnormal Operations
- 3.5 Troubleshooting for Electrical Parts
- 3.6 Troubleshooting for Print Quality Problems
- Disassembly and Assembly
- Adjustment
- Maintenance
- Appendix
EPSON EPL-6200/EPL-6200L Revision A
Product Description Controller Specification 38
1.4 Controller Specification
1.4.1 Basic Controller Specifications
EPL-6200
CPU TMPR4955BFG-200MHz (Same as for EPL-N2500)
RAM
<Standard> 8 MB (SDRAM) (mounted on ROM DIMM board)
<DIMM Option> 16 MB, 32 MB, 64 MB, 128 MB (SDRAM, 1
slot
)
Maximum136 MB
(with 128 MB SDRAM DIMM installed)
ROM
<Fonts, Program> Mixed in 16Mbyte (mounted on ROM DIMM board)
Flash memory by initial production; mask ROM by steady
production
<Expansion ROM> None
Host Interface
<Standard>
Parallel IEEE1284 compliant bi-directional interface, Type B
connector
Compatibility, Nibble, ECP
USB USB Revision 1.1
Option Type B slot (1 slot)
Control Panel 3 switches and 6 LEDs
Installation Format Fixed to the printer body
Other A mechanical control function is incorporated
Installed emulations PCLXL, PCL5e, GL/2, FX, ESCP2, I239X, ESC/Page
PostScript 3
EPL-6200L
CPU EPSON 32bit RISC S1C33000 48MHz
RAM
<Standard> 2MB
<Expansion> None
Interface IEEE 1284 compatible parallel interface (ECP, Nibble)
USB USB Revision 1.1 compatible, USB ID compatible
Panel 2 LEDs
Other expansion slots None