user manual
Table Of Contents
- EPSON EPL-6200/EPL-6200L
- Contents
- Product Description
- 1.1 Outline
- 1.2 Basic Specifications
- 1.2.1 Process Specifications
- 1.2.2 Printer Basic Specifications
- 1.2.3 Paper Specification
- 1.2.4 Reliability, Durability, Serviceability
- 1.2.5 Operating Conditions (Including Consumables)
- 1.2.6 Storage and Transport of the Printer Main Unit and Optional Products (Consumables Packaged)
- 1.2.7 Electrical Features
- 1.2.8 Compliance with Standards and Regulations
- 1.2.9 Consumable Components
- 1.3 External Appearance and Parts Name
- 1.4 Controller Specification
- 1.5 Control Panel (EPL-6200)
- 1.6 Control Panel (EPL-6200L)
- 1.7 RAM Expansion
- 1.8 System Requirements (Only for EPL-6200L)
- 1.9 Paper Feed Specifications (Only for EPL-6200L)
- 1.10 Notes on Operation
- 1.11 Status Sheet
- 1.12 Ambient Conditions
- 1.13 Differences in Specifications between Intended Markets
- 1.14 Notes on Installation of Optional Units
- Operating Principles
- 2.1 Overview
- 2.2 Description of Mechanisms
- 2.3 Operating Principles of Electric Circuitry
- Troubleshooting
- 3.1 Overview
- 3.2 Troubleshooting When There is Error Display
- 3.2.1 Fuser warming up problem
- 3.2.2 Fan problem
- 3.2.3 Polygon Motor Error
- 3.2.4 Laser problem
- 3.2.5 High voltage circuit problem
- 3.2.6 Fuser high temperature problem
- 3.2.7 CPU Error
- 3.2.8 Engine Communication Error
- 3.2.9 Fuser low temperature problem
- 3.2.10 Standard RAM Error
- 3.2.11 RAM Error (Slot 0)
- 3.2.12 ROM Checksum Error (Font)
- 3.2.13 ROM Checksum Error (Program)
- 3.2.14 Option ROM Error
- 3.2.15 EEPROM Error
- 3.2.16 Engine Initialization Error
- 3.2.17 Other Hardware Error
- 3.2.18 Software Error
- 3.3 Troubleshooting for Paper Jam
- 3.4 Troubleshooting for Abnormal Operations
- 3.5 Troubleshooting for Electrical Parts
- 3.6 Troubleshooting for Print Quality Problems
- Disassembly and Assembly
- Adjustment
- Maintenance
- Appendix
EPSON EPL-6200/EPL-6200L Revision A
Product Description Controller Specification 39
1.4.2 External I/F Specifications
EPL-6200/EPL-6200L is equipped with the external host interfaces as listed below:
NOTE:
Switching between host interfaces is automatic only. Each interface cannot
be switched on and off individually.
Figure 1-18. Rear View (Interface Bracket)
1.4.2.1 Parallel Interface Specifications
The initial Device ID value of this printer is described below:
EPL-6200
MFG:EPSON;CMD:PJL,EJL,ESCPL2,ESCP9,PRPXL24-01,PCL,HPGL2-01,ESCPAGE-
04,PCLXL,POSTSCRIPT;
MDL:EPL-6200;
CLS:PRINTER;
DES:EPSON EPL-6200;
EPL-6200L
MFG:EPSON;CMD:ESCPAGES-02;MDL:EPL-6200L;CLS:PRINTER;DES:EPSON EPL-6200L;
Table 1-38. External Host Interfaces
EPL-6200 EPL-6200L
Standard
IEEE1284 parallel interface
{{
USB interface (USB Revision 1.1)
{ {
Optional Optional Type-B I/F Card slot
{
–
USB connector
Parallel I/F connector
Parallel I/F connector
USB connector
Optional Type-B I/F Card slot
EPL-6200
EPL-6200L
Table 1-39. Parallel Interface Specifications
Item Description
Interface Type IEEE 1284 bi-directional high speed parallel interface
Operating Modes Compatibility, Nibble, ECP
Connector Model Names 57RE-40360-830B (D7A) DDK or equivalent products
Conforming Plugs AMPHENOLE or equivalents