user manual
Table Of Contents
- EPSON EPL-6200/EPL-6200L
- Contents
- Product Description
- 1.1 Outline
- 1.2 Basic Specifications
- 1.2.1 Process Specifications
- 1.2.2 Printer Basic Specifications
- 1.2.3 Paper Specification
- 1.2.4 Reliability, Durability, Serviceability
- 1.2.5 Operating Conditions (Including Consumables)
- 1.2.6 Storage and Transport of the Printer Main Unit and Optional Products (Consumables Packaged)
- 1.2.7 Electrical Features
- 1.2.8 Compliance with Standards and Regulations
- 1.2.9 Consumable Components
- 1.3 External Appearance and Parts Name
- 1.4 Controller Specification
- 1.5 Control Panel (EPL-6200)
- 1.6 Control Panel (EPL-6200L)
- 1.7 RAM Expansion
- 1.8 System Requirements (Only for EPL-6200L)
- 1.9 Paper Feed Specifications (Only for EPL-6200L)
- 1.10 Notes on Operation
- 1.11 Status Sheet
- 1.12 Ambient Conditions
- 1.13 Differences in Specifications between Intended Markets
- 1.14 Notes on Installation of Optional Units
- Operating Principles
- 2.1 Overview
- 2.2 Description of Mechanisms
- 2.3 Operating Principles of Electric Circuitry
- Troubleshooting
- 3.1 Overview
- 3.2 Troubleshooting When There is Error Display
- 3.2.1 Fuser warming up problem
- 3.2.2 Fan problem
- 3.2.3 Polygon Motor Error
- 3.2.4 Laser problem
- 3.2.5 High voltage circuit problem
- 3.2.6 Fuser high temperature problem
- 3.2.7 CPU Error
- 3.2.8 Engine Communication Error
- 3.2.9 Fuser low temperature problem
- 3.2.10 Standard RAM Error
- 3.2.11 RAM Error (Slot 0)
- 3.2.12 ROM Checksum Error (Font)
- 3.2.13 ROM Checksum Error (Program)
- 3.2.14 Option ROM Error
- 3.2.15 EEPROM Error
- 3.2.16 Engine Initialization Error
- 3.2.17 Other Hardware Error
- 3.2.18 Software Error
- 3.3 Troubleshooting for Paper Jam
- 3.4 Troubleshooting for Abnormal Operations
- 3.5 Troubleshooting for Electrical Parts
- 3.6 Troubleshooting for Print Quality Problems
- Disassembly and Assembly
- Adjustment
- Maintenance
- Appendix
EPSON EPL-6200/EPL-6200L Revision A
Product Description Control Panel (EPL-6200) 46
1.5.4 Special Operation (EPL-6200)
With EPL-6200, the functions described below are activated by holding the specified
switches down when turning the printer on.
Note “*1”: The Ready LED and Error LED light up simultaneously when the printer
recognizes the function. Then all the LEDs go out once for one second or so.
“*2”: When the switches are released, the Ready LED and Error LED light up
simultaneously, and keep lighting during execution of the function.
“*3”: Release the switches when only the Ready LED starts flashing. (Other LEDs light
up)
The Ready LED flashes, while the Paper, Toner and Memory LEDs light up.
Upon completion of download, only the Ready LED flashes.
“*4”: Release the switches when only the Online LED starts flashing.
During data reception: Online LED lighting + Data LED flashing
slowly
During data transfer to engine: Online LED lighting + Data LED flashing
+ Paper, Toner or Memory LED lights up
sequentially
During other processing: Online LED lighting + Data LED flashing
At writing end: Online LED flashing slowly + Error LED
lighting
Error Related LED Indications
Size of received data is different from the specification:
Error LED flashing + Paper LED lighting
Mechanical Controller is not Flash:
Error LED flashing + Toner LED lighting
Model code of Mechanical Controller is different from that of the file:
Error LED flashing + Memory LED lighting
Some other error:
Error LED flashing
Error that can not be identified:
All LEDs flashing
C A U T I O N
The functions other than Hexadecimal Dump and Photoconductor
Life Reset must not be disclosed to the user.
Table 1-49. Special Operation
Function Methods of operation
Hexadecimal dump “Start/Stop” and power on *
1
Photoconductor life reset “Start/Stop” + “Information” and power on *
1,
*
2
Initializing EEPROM “Start/Stop” + “Job Cancel” + “Information” and power
on*
1,
*
2
Initializing the panel setting value “Job Cancel” and power on*
1,
*
2
Program ROM update mode “Job Cancel” + “Information” and power on*
3
CPU reset
+ Printing of error sheet
Press the Information Switch at occurrence of a service
call error. An error sheet will be printed after warm boot.
Engine program ROM update mode “Start/Stop” + “Job Cancel” and power on*
4