user manual
Table Of Contents
- EPSON EPL-6200/EPL-6200L
- Contents
- Product Description
- 1.1 Outline
- 1.2 Basic Specifications
- 1.2.1 Process Specifications
- 1.2.2 Printer Basic Specifications
- 1.2.3 Paper Specification
- 1.2.4 Reliability, Durability, Serviceability
- 1.2.5 Operating Conditions (Including Consumables)
- 1.2.6 Storage and Transport of the Printer Main Unit and Optional Products (Consumables Packaged)
- 1.2.7 Electrical Features
- 1.2.8 Compliance with Standards and Regulations
- 1.2.9 Consumable Components
- 1.3 External Appearance and Parts Name
- 1.4 Controller Specification
- 1.5 Control Panel (EPL-6200)
- 1.6 Control Panel (EPL-6200L)
- 1.7 RAM Expansion
- 1.8 System Requirements (Only for EPL-6200L)
- 1.9 Paper Feed Specifications (Only for EPL-6200L)
- 1.10 Notes on Operation
- 1.11 Status Sheet
- 1.12 Ambient Conditions
- 1.13 Differences in Specifications between Intended Markets
- 1.14 Notes on Installation of Optional Units
- Operating Principles
- 2.1 Overview
- 2.2 Description of Mechanisms
- 2.3 Operating Principles of Electric Circuitry
- Troubleshooting
- 3.1 Overview
- 3.2 Troubleshooting When There is Error Display
- 3.2.1 Fuser warming up problem
- 3.2.2 Fan problem
- 3.2.3 Polygon Motor Error
- 3.2.4 Laser problem
- 3.2.5 High voltage circuit problem
- 3.2.6 Fuser high temperature problem
- 3.2.7 CPU Error
- 3.2.8 Engine Communication Error
- 3.2.9 Fuser low temperature problem
- 3.2.10 Standard RAM Error
- 3.2.11 RAM Error (Slot 0)
- 3.2.12 ROM Checksum Error (Font)
- 3.2.13 ROM Checksum Error (Program)
- 3.2.14 Option ROM Error
- 3.2.15 EEPROM Error
- 3.2.16 Engine Initialization Error
- 3.2.17 Other Hardware Error
- 3.2.18 Software Error
- 3.3 Troubleshooting for Paper Jam
- 3.4 Troubleshooting for Abnormal Operations
- 3.5 Troubleshooting for Electrical Parts
- 3.6 Troubleshooting for Print Quality Problems
- Disassembly and Assembly
- Adjustment
- Maintenance
- Appendix
EPSON EPL-6200/EPL-6200L Revision A
Product Description Control Panel (EPL-6200L) 47
1.6 Control Panel (EPL-6200L)
1.6.1 External Appearance and Names of Parts
Figure 1-20. Control Panel of EPL-6200L
Meaning of LED Flashing on EPL-6200L
Note 1: The both two LEDs lights for a while when printer power turned on.
2: During Checking RAM Ready LED flash. (Interval time: On: 0.1sec Off: 0.1sec)
(But the time of checking RAM is very short, then the flashing may not visible.)
3: Interval time
Flashing1: On 0.3sec, Off 0.3sec
Flashing3: On 0.6sec, Off 2.4sec
Table 1-50. Buttons and LEDs of EPL-6200L
No. Name Note
1 Ready LED Color: Green
2 Error LED Color: Red
1
2
Table 1-51. Meaning of LED Flashing
Ready LED Error LED Supplement Meaning
Off Off - Power off
On Off - Ready to print (It include warning status)
Blink 1 Off -
Moving to Ready status.
Warming up, receiving data is included.
Blink 3 Off -
Warning for consumables
Non genuine consumables warning
Off Blink 1 - –
Blink 1 Blink 1
Green and red blink
alternately
Engine Error
It is a service call error.
Blink 1 Blink 1
Green and red blink
simultaneously
RAM check error (RAM is not installed.)
Blink 1 and
Off
Blink 1
1. Green: On, Red: On
2. Green: Off, Red: Off
3. Green: Off, Red: On
4. Green: Off, Red: Off
5. Return to pattern 1
It is a service call error except or Engine
Error.
Ex) IPL Error
On Blink 1 -
Recoverable Errors by Status Monitor.
Ex.) Underrun Error Replace paper error
Off On -
Controller Error It is a service call error.
Ex.) Video Error
Data Expansion Error
EEPROM Access Error
Software Error
Blink 1 On -
Protocol Error
It will be fixed after you turn it power off.
On On -
Recoverable Errors without power off.
Ex) Cover Open
Paper jam (Paper Out)