user manual
Table Of Contents
- EPSON EPL-6200/EPL-6200L
- Contents
- Product Description
- 1.1 Outline
- 1.2 Basic Specifications
- 1.2.1 Process Specifications
- 1.2.2 Printer Basic Specifications
- 1.2.3 Paper Specification
- 1.2.4 Reliability, Durability, Serviceability
- 1.2.5 Operating Conditions (Including Consumables)
- 1.2.6 Storage and Transport of the Printer Main Unit and Optional Products (Consumables Packaged)
- 1.2.7 Electrical Features
- 1.2.8 Compliance with Standards and Regulations
- 1.2.9 Consumable Components
- 1.3 External Appearance and Parts Name
- 1.4 Controller Specification
- 1.5 Control Panel (EPL-6200)
- 1.6 Control Panel (EPL-6200L)
- 1.7 RAM Expansion
- 1.8 System Requirements (Only for EPL-6200L)
- 1.9 Paper Feed Specifications (Only for EPL-6200L)
- 1.10 Notes on Operation
- 1.11 Status Sheet
- 1.12 Ambient Conditions
- 1.13 Differences in Specifications between Intended Markets
- 1.14 Notes on Installation of Optional Units
- Operating Principles
- 2.1 Overview
- 2.2 Description of Mechanisms
- 2.3 Operating Principles of Electric Circuitry
- Troubleshooting
- 3.1 Overview
- 3.2 Troubleshooting When There is Error Display
- 3.2.1 Fuser warming up problem
- 3.2.2 Fan problem
- 3.2.3 Polygon Motor Error
- 3.2.4 Laser problem
- 3.2.5 High voltage circuit problem
- 3.2.6 Fuser high temperature problem
- 3.2.7 CPU Error
- 3.2.8 Engine Communication Error
- 3.2.9 Fuser low temperature problem
- 3.2.10 Standard RAM Error
- 3.2.11 RAM Error (Slot 0)
- 3.2.12 ROM Checksum Error (Font)
- 3.2.13 ROM Checksum Error (Program)
- 3.2.14 Option ROM Error
- 3.2.15 EEPROM Error
- 3.2.16 Engine Initialization Error
- 3.2.17 Other Hardware Error
- 3.2.18 Software Error
- 3.3 Troubleshooting for Paper Jam
- 3.4 Troubleshooting for Abnormal Operations
- 3.5 Troubleshooting for Electrical Parts
- 3.6 Troubleshooting for Print Quality Problems
- Disassembly and Assembly
- Adjustment
- Maintenance
- Appendix
EPSON EPL-6200/EPL-6200L Revision A
Product Description Control Panel (EPL-6200L) 54
When you replace the Developer Cartridge (toner cartridge), the pop-up
message of the EPSON Status Monitor disappears.
(The toner counter reset can be executed even if you do not replace the
Developer Cartridge.)
Worn Photoconductor
Description
Photoconductor life is 5% or less.
Remedy
Clicking the [Close] button once closes the pop-up display of the EPSON
Status Monitor. However, it will be displayed again if the warning is still
remain after changing another status.
Replace the Photoconductor Unit and reset the counter by printer driver. As a
result, the pop-up message of the EPSON Status Monitor disappears. (The
Photoconductor reset can be executed even if you do not replace the
Photoconductor Unit.)
NonGenuineTonerCart
Description
Installed Developer Cartridge (toner cartridge) is not EPSON genuine.
Remedy
Open the cover, set the correct Developer Cartridge (toner cartridge) and
close the cover again to clear the error. The pop-up display of the EPSON
Status Monitor disappears after error recovery.
However, it will be displayed again if the warning is still remain after
changing another status.
1.6.4 Special Operation (EPL-6200L)
This section describes the special operation functions of EPL-6200L.
1.6.4.1 EEPROM Initialization
The setting values in the printer are cleared. The following items are initialized:
Total Pages
Jam Count
Genuine Toner Change
Toner Life counter (CSIC)
Photoreceptor Life counter
USB ID
Registration position (paper feed direction)
Non Genuine Toner Change
C A U T I O N
This function, a hidden function, must not be opened to users.
A D J U S T M E N T
R E Q U I R E D
After EEPROM initialization, input the USB ID and make the
registration adjustment.
For details, refer to “5.3 Feed Registration Adjustment (p.169)”.