user manual
Table Of Contents
- EPSON EPL-6200/EPL-6200L
- Contents
- Product Description
- 1.1 Outline
- 1.2 Basic Specifications
- 1.2.1 Process Specifications
- 1.2.2 Printer Basic Specifications
- 1.2.3 Paper Specification
- 1.2.4 Reliability, Durability, Serviceability
- 1.2.5 Operating Conditions (Including Consumables)
- 1.2.6 Storage and Transport of the Printer Main Unit and Optional Products (Consumables Packaged)
- 1.2.7 Electrical Features
- 1.2.8 Compliance with Standards and Regulations
- 1.2.9 Consumable Components
- 1.3 External Appearance and Parts Name
- 1.4 Controller Specification
- 1.5 Control Panel (EPL-6200)
- 1.6 Control Panel (EPL-6200L)
- 1.7 RAM Expansion
- 1.8 System Requirements (Only for EPL-6200L)
- 1.9 Paper Feed Specifications (Only for EPL-6200L)
- 1.10 Notes on Operation
- 1.11 Status Sheet
- 1.12 Ambient Conditions
- 1.13 Differences in Specifications between Intended Markets
- 1.14 Notes on Installation of Optional Units
- Operating Principles
- 2.1 Overview
- 2.2 Description of Mechanisms
- 2.3 Operating Principles of Electric Circuitry
- Troubleshooting
- 3.1 Overview
- 3.2 Troubleshooting When There is Error Display
- 3.2.1 Fuser warming up problem
- 3.2.2 Fan problem
- 3.2.3 Polygon Motor Error
- 3.2.4 Laser problem
- 3.2.5 High voltage circuit problem
- 3.2.6 Fuser high temperature problem
- 3.2.7 CPU Error
- 3.2.8 Engine Communication Error
- 3.2.9 Fuser low temperature problem
- 3.2.10 Standard RAM Error
- 3.2.11 RAM Error (Slot 0)
- 3.2.12 ROM Checksum Error (Font)
- 3.2.13 ROM Checksum Error (Program)
- 3.2.14 Option ROM Error
- 3.2.15 EEPROM Error
- 3.2.16 Engine Initialization Error
- 3.2.17 Other Hardware Error
- 3.2.18 Software Error
- 3.3 Troubleshooting for Paper Jam
- 3.4 Troubleshooting for Abnormal Operations
- 3.5 Troubleshooting for Electrical Parts
- 3.6 Troubleshooting for Print Quality Problems
- Disassembly and Assembly
- Adjustment
- Maintenance
- Appendix
EPSON EPL-6200/EPL-6200L Revision A
Product Description Paper Feed Specifications (Only for EPL-6200L) 58
1.9 Paper Feed Specifications (Only for EPL-6200L)
1.9.1 Paper Size
The following three types of information related to paper sizes are available.
User setting size: Paper sizes that the user specifies on the printer driver.
<Supported paper sizes>
A4, A5, B5, LT, HLT, LGL, GLT, GLG, EXE, F4, MON, C10, DL, C5, C6,
IB5, User defined size
Printer paper size: Paper sizes for the MP Tray that the printer recognizes is stored
in EEPROM.
MP Tray paper size: A size of paper that is loaded in the MP Tray and is actually
fed.
The Printer paper size is changed or determined as follows.
When the power to the printer is turned on:
Undefined.
After ejecting paper: In the case where the User setting size is a standard size
When the Check Paper Size error does not occur
→
User setting size.
When the Check Paper Size error occurs
→
Undefined.
In the case where User setting size is User defined size:
No modification is added to the paper size.
1.9.2 Paper Feed Specifications
NOTE:
Refer to
“1.9.3 Case List (p.59)”
Table 1-58. Paper Feed Specifications
Items Specifications
Methods of detecting
the Paper Set error
The printer detects the error when the Printer paper size differs from
the User setting size (red LED blinks). However, this error does not
occur if the User setting size is other than standard sizes (User
defined size) or the Printer paper size is undefined.
Methods of detecting
the Check Paper Size
(warning)
The printer detects the error when the User setting size differs from
the MP Tray paper size. However, when the User setting size is
other than standard sizes (User defined size), this error is not
detected. Other exceptions: see Check Paper Size of
“Details of
Warning Status and Processing” (p.53)
.