user manual
Table Of Contents
- EPSON EPL-6200/EPL-6200L
- Contents
- Product Description
- 1.1 Outline
- 1.2 Basic Specifications
- 1.2.1 Process Specifications
- 1.2.2 Printer Basic Specifications
- 1.2.3 Paper Specification
- 1.2.4 Reliability, Durability, Serviceability
- 1.2.5 Operating Conditions (Including Consumables)
- 1.2.6 Storage and Transport of the Printer Main Unit and Optional Products (Consumables Packaged)
- 1.2.7 Electrical Features
- 1.2.8 Compliance with Standards and Regulations
- 1.2.9 Consumable Components
- 1.3 External Appearance and Parts Name
- 1.4 Controller Specification
- 1.5 Control Panel (EPL-6200)
- 1.6 Control Panel (EPL-6200L)
- 1.7 RAM Expansion
- 1.8 System Requirements (Only for EPL-6200L)
- 1.9 Paper Feed Specifications (Only for EPL-6200L)
- 1.10 Notes on Operation
- 1.11 Status Sheet
- 1.12 Ambient Conditions
- 1.13 Differences in Specifications between Intended Markets
- 1.14 Notes on Installation of Optional Units
- Operating Principles
- 2.1 Overview
- 2.2 Description of Mechanisms
- 2.3 Operating Principles of Electric Circuitry
- Troubleshooting
- 3.1 Overview
- 3.2 Troubleshooting When There is Error Display
- 3.2.1 Fuser warming up problem
- 3.2.2 Fan problem
- 3.2.3 Polygon Motor Error
- 3.2.4 Laser problem
- 3.2.5 High voltage circuit problem
- 3.2.6 Fuser high temperature problem
- 3.2.7 CPU Error
- 3.2.8 Engine Communication Error
- 3.2.9 Fuser low temperature problem
- 3.2.10 Standard RAM Error
- 3.2.11 RAM Error (Slot 0)
- 3.2.12 ROM Checksum Error (Font)
- 3.2.13 ROM Checksum Error (Program)
- 3.2.14 Option ROM Error
- 3.2.15 EEPROM Error
- 3.2.16 Engine Initialization Error
- 3.2.17 Other Hardware Error
- 3.2.18 Software Error
- 3.3 Troubleshooting for Paper Jam
- 3.4 Troubleshooting for Abnormal Operations
- 3.5 Troubleshooting for Electrical Parts
- 3.6 Troubleshooting for Print Quality Problems
- Disassembly and Assembly
- Adjustment
- Maintenance
- Appendix
EPSON EPL-6200/EPL-6200L Revision A
Product Description Status Sheet 61
1.11 Status Sheet
<EPL-6200>
A sample of the Status Sheet is shown at right.
The following information is printed at bottom left in the order of 1) to 8):
1). IA followed by firmware version shown in the DDYM format
For M (month), “A” represents October, “B” November and “C” December
2). Negotiation result of IEEE1284
e: ECP, n: Nibble, or none: Compatibility or not connected
3). Device type of code ROM
*: Flash or none: Mask
4). 6-digit number indicating the number of times a jam has occurred
JXXXXXX
5). The number of times the Developer Cartridge (toner cartridge) was replaced:
“ICXXX YYY”
The number of digits depends on the replacement count.
X: The number of times the genuine Developer Cartridge (toner cartridge)
was replaced with a new one. Counting is continued until a maximum of
999 new cartridges are installed. The Developer Cartridge that has been
installed in any printer once is not regarded to be a new one even if it has
never been used for printing.
Y: The number of times the non-genuine Developer Cartridge was replaced
with a new one.
6). USB ID (24PXXXXXXXXXXXXXXX)
7). The latest connection status of USB communicate mode
F: FS, or none: no connection with USB
8). 10-digit number headed by MC, representing the Mechanical Controller
version of the engine