user manual
Table Of Contents
- EPSON EPL-6200/EPL-6200L
- Contents
- Product Description
- 1.1 Outline
- 1.2 Basic Specifications
- 1.2.1 Process Specifications
- 1.2.2 Printer Basic Specifications
- 1.2.3 Paper Specification
- 1.2.4 Reliability, Durability, Serviceability
- 1.2.5 Operating Conditions (Including Consumables)
- 1.2.6 Storage and Transport of the Printer Main Unit and Optional Products (Consumables Packaged)
- 1.2.7 Electrical Features
- 1.2.8 Compliance with Standards and Regulations
- 1.2.9 Consumable Components
- 1.3 External Appearance and Parts Name
- 1.4 Controller Specification
- 1.5 Control Panel (EPL-6200)
- 1.6 Control Panel (EPL-6200L)
- 1.7 RAM Expansion
- 1.8 System Requirements (Only for EPL-6200L)
- 1.9 Paper Feed Specifications (Only for EPL-6200L)
- 1.10 Notes on Operation
- 1.11 Status Sheet
- 1.12 Ambient Conditions
- 1.13 Differences in Specifications between Intended Markets
- 1.14 Notes on Installation of Optional Units
- Operating Principles
- 2.1 Overview
- 2.2 Description of Mechanisms
- 2.3 Operating Principles of Electric Circuitry
- Troubleshooting
- 3.1 Overview
- 3.2 Troubleshooting When There is Error Display
- 3.2.1 Fuser warming up problem
- 3.2.2 Fan problem
- 3.2.3 Polygon Motor Error
- 3.2.4 Laser problem
- 3.2.5 High voltage circuit problem
- 3.2.6 Fuser high temperature problem
- 3.2.7 CPU Error
- 3.2.8 Engine Communication Error
- 3.2.9 Fuser low temperature problem
- 3.2.10 Standard RAM Error
- 3.2.11 RAM Error (Slot 0)
- 3.2.12 ROM Checksum Error (Font)
- 3.2.13 ROM Checksum Error (Program)
- 3.2.14 Option ROM Error
- 3.2.15 EEPROM Error
- 3.2.16 Engine Initialization Error
- 3.2.17 Other Hardware Error
- 3.2.18 Software Error
- 3.3 Troubleshooting for Paper Jam
- 3.4 Troubleshooting for Abnormal Operations
- 3.5 Troubleshooting for Electrical Parts
- 3.6 Troubleshooting for Print Quality Problems
- Disassembly and Assembly
- Adjustment
- Maintenance
- Appendix
EPSON EPL-6200/EPL-6200L Revision A
Product Description Differences in Specifications between Intended Markets 65
1.13 Differences in Specifications between Intended Markets
1.13.1 Differences in Specifications
Table 1-60. Differences in Specifications between Intended Markets
Model EPL-6200 LP-2500 EPL-6200L LP-1400
Intended Markets
South
America
and
Taiwan
Europe, Pacific, China and
Korea
Japan
South
America
and
Taiwan
Europe, Pacific, China and
Korea
Japan
Resolution /Printing
Speed
1200 dpi: 10 ppm, 600/300 dpi: 20 ppm ← 600 dpi: 20 ppm ←
Toner Life
Pre-installed: 3000 sheets
Replaced: 3000 sheets or 6000 sheets
Pre-installed: 1500 sheets
Replaced: 6000 sheets
Pre-installed: 1500 sheets
Replaced: 3000 sheets or 6000
sheets
←
Standard RAM
8 MB 16 MB 2 MB ←
RAM Expansion
136 MB max. 144 MB None ←
Optional ROM Slot
1 slot (for PS or IPDS option) None None ←
Type-B Slot
Supported ← None ←
Control Panel
3 SW/ 6 LEDs ← 2LEDs ←
Main Board Assy
C533MAIN
(WW spec)
C533MAIN
(J spec)
C534MAIN
(WW spec)
C534MAIN
(J spec)
Memory Board Assy
• C533PROG (WW spec) (initial products)
• C533PROG-C (WW spec) (by stable
production)
• C533PROG (J spec) (initial products)
• C533PROG-B (J spec) (by stable production)
- -
Optional Units
• Lower Cassette Unit
• Duplex Unit (Lower cassette required)
• Lower Cassette Unit - -
Power Supply Unit
120V
system
220V system 100V system
120V
system
220V system 100V system
C H E C K
P O I N T
There is a difference in jumper setting between “WW spec” and “J
spec” of C533MAIN/C534MAIN. Refer to “Jumper Setting” (p.66).