user manual
Table Of Contents
- EPSON EPL-6200/EPL-6200L
- Contents
- Product Description
- 1.1 Outline
- 1.2 Basic Specifications
- 1.2.1 Process Specifications
- 1.2.2 Printer Basic Specifications
- 1.2.3 Paper Specification
- 1.2.4 Reliability, Durability, Serviceability
- 1.2.5 Operating Conditions (Including Consumables)
- 1.2.6 Storage and Transport of the Printer Main Unit and Optional Products (Consumables Packaged)
- 1.2.7 Electrical Features
- 1.2.8 Compliance with Standards and Regulations
- 1.2.9 Consumable Components
- 1.3 External Appearance and Parts Name
- 1.4 Controller Specification
- 1.5 Control Panel (EPL-6200)
- 1.6 Control Panel (EPL-6200L)
- 1.7 RAM Expansion
- 1.8 System Requirements (Only for EPL-6200L)
- 1.9 Paper Feed Specifications (Only for EPL-6200L)
- 1.10 Notes on Operation
- 1.11 Status Sheet
- 1.12 Ambient Conditions
- 1.13 Differences in Specifications between Intended Markets
- 1.14 Notes on Installation of Optional Units
- Operating Principles
- 2.1 Overview
- 2.2 Description of Mechanisms
- 2.3 Operating Principles of Electric Circuitry
- Troubleshooting
- 3.1 Overview
- 3.2 Troubleshooting When There is Error Display
- 3.2.1 Fuser warming up problem
- 3.2.2 Fan problem
- 3.2.3 Polygon Motor Error
- 3.2.4 Laser problem
- 3.2.5 High voltage circuit problem
- 3.2.6 Fuser high temperature problem
- 3.2.7 CPU Error
- 3.2.8 Engine Communication Error
- 3.2.9 Fuser low temperature problem
- 3.2.10 Standard RAM Error
- 3.2.11 RAM Error (Slot 0)
- 3.2.12 ROM Checksum Error (Font)
- 3.2.13 ROM Checksum Error (Program)
- 3.2.14 Option ROM Error
- 3.2.15 EEPROM Error
- 3.2.16 Engine Initialization Error
- 3.2.17 Other Hardware Error
- 3.2.18 Software Error
- 3.3 Troubleshooting for Paper Jam
- 3.4 Troubleshooting for Abnormal Operations
- 3.5 Troubleshooting for Electrical Parts
- 3.6 Troubleshooting for Print Quality Problems
- Disassembly and Assembly
- Adjustment
- Maintenance
- Appendix
EPSON EPL-6200/EPL-6200L Revision A
Product Description Notes on Installation of Optional Units 66
1.13.2 Jumper Setting
C533MAIN (for EPL-6200) is equipped with two resistance jumpers.
C534MAIN (for EPL-6200L) is equipped with one resistance jumper.
1.14 Notes on Installation of Optional Units
Notes on Installation of Duplex Unit
The Duplex Unit cannot be installed without the Lower Cassette Unit installed.
Install the Duplex Unit by the following procedure.
1. Remove the rear cover of the Lower Cassette Unit. (Two screws)
2. Install the Lower Cassette Unit on the printer body.
3. Install the Duplex Unit.
4. Remove the Connector Cover for the Duplex Unit found at the rear of the
printer body, insert the connector into the printer body, and put the Connector
Cover back in its position.
• If you would like to remove the Duplex Unit, reverse the procedure of steps 1 to
4 above.
Resistance Jumper
R1101 R1102
WW: Letter/A4
Installed: Letter
Not installed: A4
WW: No setting
J: AGFA Font availability
Installed: Not available
Not installed: Available
J: OEM/Brand
Installed: OEM
Not installed: Brand
WW spec setting Not installed (A4) Not installed (default)
J spec setting Not installed (Font available) Not installed (brand)
Resistance Jumper
Setting for Markets
R111
J spec setting Installed:
WW spec setting Not installed:
C A U T I O N
If you use a wrong procedure, the Duplex Unit may be broken.