user manual
Table Of Contents
- EPSON EPL-6200/EPL-6200L
- Contents
- Product Description
- 1.1 Outline
- 1.2 Basic Specifications
- 1.2.1 Process Specifications
- 1.2.2 Printer Basic Specifications
- 1.2.3 Paper Specification
- 1.2.4 Reliability, Durability, Serviceability
- 1.2.5 Operating Conditions (Including Consumables)
- 1.2.6 Storage and Transport of the Printer Main Unit and Optional Products (Consumables Packaged)
- 1.2.7 Electrical Features
- 1.2.8 Compliance with Standards and Regulations
- 1.2.9 Consumable Components
- 1.3 External Appearance and Parts Name
- 1.4 Controller Specification
- 1.5 Control Panel (EPL-6200)
- 1.6 Control Panel (EPL-6200L)
- 1.7 RAM Expansion
- 1.8 System Requirements (Only for EPL-6200L)
- 1.9 Paper Feed Specifications (Only for EPL-6200L)
- 1.10 Notes on Operation
- 1.11 Status Sheet
- 1.12 Ambient Conditions
- 1.13 Differences in Specifications between Intended Markets
- 1.14 Notes on Installation of Optional Units
- Operating Principles
- 2.1 Overview
- 2.2 Description of Mechanisms
- 2.3 Operating Principles of Electric Circuitry
- Troubleshooting
- 3.1 Overview
- 3.2 Troubleshooting When There is Error Display
- 3.2.1 Fuser warming up problem
- 3.2.2 Fan problem
- 3.2.3 Polygon Motor Error
- 3.2.4 Laser problem
- 3.2.5 High voltage circuit problem
- 3.2.6 Fuser high temperature problem
- 3.2.7 CPU Error
- 3.2.8 Engine Communication Error
- 3.2.9 Fuser low temperature problem
- 3.2.10 Standard RAM Error
- 3.2.11 RAM Error (Slot 0)
- 3.2.12 ROM Checksum Error (Font)
- 3.2.13 ROM Checksum Error (Program)
- 3.2.14 Option ROM Error
- 3.2.15 EEPROM Error
- 3.2.16 Engine Initialization Error
- 3.2.17 Other Hardware Error
- 3.2.18 Software Error
- 3.3 Troubleshooting for Paper Jam
- 3.4 Troubleshooting for Abnormal Operations
- 3.5 Troubleshooting for Electrical Parts
- 3.6 Troubleshooting for Print Quality Problems
- Disassembly and Assembly
- Adjustment
- Maintenance
- Appendix
EPSON EPL-6200/EPL-6200L Revision A
Operating Principles Description of Mechanisms 87
2.2.7 Lower Cassette (Option for EPL-6200)
This section describes the mechanism of the optional lower cassette unit for EPL-6200.
2.2.7.1 Locations of Electrical Parts
See Figure 2-24 at right and Table 2-7 below for locations of electrical parts.
2.2.7.2 Paper Feed Mechanism
Since the Lower Cassette Unit does not have drive motor, driving power in the
Lower Cassette Unit for feeding and carrying paper is transmitted from the printer
(from M1) via the connecting gear.
(See “Figure 2-25”)
Paper feed method is the same as with the MP Tray. However, paper separation
method is different; the separation pad method is used for the MP Tray, while the
separator claw is used for the Lower Cassette Unit.
The separator claw method uses the paper separator claw installed at the paper
cassette and the elasticity of paper. Only one sheet of paper is fed by one paper
feed operation.
The paper feed solenoid is controlled from the printer side via the control board in
the Lower Cassette.
Figure 2-24. Locations of Electrical Parts
Figure 2-25. Paper Feed Mechanism
Table 2-7. Electrical Parts
Symbol Names of Parts
SW1 Cassette Type Sensor Switch
PWB-A CAS 2nd Tray Control Board
SL-2 2nd Tray Paper Feed Solenoid
SL-2
PWB-A CAS
SW1
Connecting Gear
Paper
Cassette Type Sensor Switch (SW1)
Paper Feed Roller
Control Board (PWB-A CAS)
Paper Feed Solenoid
(SL-2)