Installation guide

Wireless Network Installation 13
Select WEP Security Settings
1. Press u or d to select Alphanumeric if your WEP key is ASCII, or select
Hexadecimal if your WEP key is in hexadecimal format.
Note:
If the WEP key is 5 or 13 characters, it’s ASCII. If the WEP key is 10 or 26
characters, it’s hexadecimal.
2. Use the arrow buttons on the printer’s control panel to enter your WEP key.
Important:
WEP keys in ASCII format are case-sensitive. Be sure to enter upper- or lowercase
letters as necessary.
■
Press x Menu to switch between uppercase ( ABC ), lowercase ( abc ), or
numeric/special (
123 ) characters.
■ Press u or d until you see the character you want.
■ Press l or r to move the cursor.
■ Press – to delete a character.
3. When you’re done entering the WEP key, press
OK .
4. Continue with the next section.
To enter a character:
Press u or d to select a character.
Press l or r to move the cursor.
Press – to delete a character.
Press the x Menu button to switch between
uppercase, lowercase, or numeric/special characters.
Indicates current selection: ABC, abc, or 123.