EMP Monitor Operation Guide
EMP Monitor Operation Guide Contents What You Can Do With EMP Monitor 1 2 Operating Environment ........................................................... 2 Before Starting Operations...................................................... 2 Registering Projectors for Monitoring 3 Registration Using Automatic Detection.................................. 4 Registration Using IP Address (Manual Registration) ............. 5 Editing the Manually-Registered Projector List .......................
EMP Monitor Operation Guide What You Can Do With EMP Monitor You can display status information on a computer screen for multiple projectors that are connected to a network and also carry out batch operations on all projectors such as turning the power on and off and changing the input source. A maximum of 64 projectors can be monitored and controlled by batch operations. 2 Operating Environment * Macintosh computers cannot be used.
EMP Monitor Operation Guide Registering Projectors for Monitoring 3 This operation is carried out when starting EMP Monitor for the first time after it has been installed and when you would like to add projectors. Once a projector has been registered, the status for the projector will be displayed automatically each time EMP Monitor is started from that point onwards. PROCEDURE 1 Click "Start" - "Programs" (or "All Programs") "EPSON Projector" - "EMP Monitor" in that order to start EMP Monitor.
EMP Monitor Operation Guide 4 Registering Projectors for Monitoring Registration Using Automatic Detection PROCEDURE 1 Click the "Auto detect" button in the "Register projector" window. 2 Select the projector(s) to be registered, and then click the "Add" button. If a projector does not appear in the list, use "Registration Using IP Address (Manual Registration)". sp.
EMP Monitor Operation Guide 5 Registering Projectors for Monitoring Registration Using IP Address (Manual Registration) PROCEDURE 1 2 3 Click the "Manual registration" button in the "Register projector" window. Enter the IP address for the projector to be registered in the "IP address" box, and then click the "Confirm" button. If a projector with the specified IP address is found on the network, the projector's name will be displayed, so check that it is the target projector.
EMP Monitor Operation Guide Main EMP Monitor Window The main window shows the status information for each projector. To carry our operations for projectors, select the projectors from the projector list and then click the buttons. Buttons 6 Button Functions The power can be turned on or off and the input source can be changed for the projectors that are selected from the projector list. The same operations can also be carried out using the commands in the "Tool" menu.
EMP Monitor Operation Guide 7 Main EMP Monitor Window Understanding the Projector List The projector list uses the following icons to show the projector statuses. Status: Shows the projector status. Power on and normal status Power off and normal status Power on and abnormal status Power off and abnormal status Network error (such as not connected to network or power cable not connected) Name: Shows the projector name. Input source: Shows the selected input source.
EMP Monitor Operation Guide 8 Main EMP Monitor Window Displaying Detailed Information You can check detailed information on the status of individual projectors that are connected. PROCEDURE 1 Select the projector to be checked in the main window. 2 Click the "View details" button. Click to display details. The details that are displayed may vary slightly depending on the projector connected. Detailed status information will be displayed in the "Details" window.
EMP Monitor Operation Guide If a Projector Cannot be Monitored or Controlled Using EMP Monitor Cause Remedy Is the projector connected to Connect the network cable correctly. s"Network Cable Connections" in the the network correctly? User's Guide Has the projector been set Check the projector's network settings.
EMP Monitor Operation Guide 10 All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information contained herein.
