Manualshelf

Owners manual

ManualsBrandsEpson ManualsComputers & LaptopsDS-780N Sheetfed Scanner - 600 dpi Optical - 30-bit Color - 30-bit Grayscale - 45 ppm (Mono) - 45 ppm (Color) - Duplex Sca
51525354555657585960
58
Setting the Operation Mode on the Product Control Panel
Before scanning, set the operation mode on the control panel.
1. Make sure you installed the product software and connected the product to your computer or
network.
2. Press the home button, if necessary.
3. Select Settings.
4. Select Document Capture Pro.
5. Select Change Settings and choose from the following options:
• Select Server Mode if your product is connected to the computer over a network. You need to
enter the server address in this mode.
Note: Document Capture Pro Server (Windows) must be installed and running on the server.
• Select Client Mode if your product is connected to the computer via USB cable.
6. Select Start Setup.
7. Select Close to return to the Settings menu.
Parent topic: Starting a Scan Using the Product Control Panel
Adding and Assigning Scan Jobs with Document Capture Pro - Windows
You can view, change, or add available default scan settings when you scan using the Document
Capture Pro option on the product control panel. You do this by accessing the scan jobs in the Document
Capture Pro program.
1. Start Document Capture Pro on a computer connected to the product.
2. Click the Job Settings button.