User's Manual
Table Of Contents
- Contents
- Scanner Basics
- Loading Originals
- Wi-Fi Networking
- Scanning
- Cleaning and Transporting Your Scanner
- Solving Problems
- Scanner Light Status
- Solving Scanning Problems
- Solving Network Scanning Problems
- Solving Scanned Image Quality Problems
- Back of Original Image Appears in Scanned Image
- Scanned Characters are Blurry
- Characters are not Recognized During Conversion to Editable Text (OCR)
- Ripple Patterns Appear in an Image
- Spots or Lines Appear in All Scanned Images
- Straight Lines in an Image Appear Crooked
- Scanned Image is Cropped
- Resetting the Epson Scan 2 Settings
- Solving Receipt Manager Problems
- Uninstall Your Scanner Software
- Where to Get Help
- Technical Specifications
- Notices
79
Light status Condition/solution
The ready light is orange Check the following:
• Make sure there are no originals jammed in the scanner.
• Make sure the scanner is connected to your computer securely.
• If a firmware update fails and the scanner enters recovery mode,
update the firmware again using a USB connection.
• Disconnect and re-connect the USB cable to the computer. If this
does not solve the problem, the scanner may be malfunctioning or
the light source in the scanner unit may need to be replaced. Contact
Epson for support.
ES-60W/ES-65WR
1
Wi-Fi light
2
Wi-Fi AP light
3
battery light
4 Error status light
5 Ready light