COLOR SCANNER SETUP GUIDE
FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception.
Copyright Notice All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. The information contained herein is designed only for use with this EPSON scanner. EPSON is not responsible for any use of this information as applied to other scanners.
Contents SCANNING FOR PROFESSIONAL RESULTS About Your Scanner About Your Software About Your Documentation Warnings, Cautions, Notes, and Tips System Requirements Windows Macintosh Year 2000 Ready Important Safety Instructions SETTING UP YOUR SCANNER Unpack Your Scanner Choose a Good Place for Your Scanner Install the SCSI Interface Board Unlock the Scanner Set the SCSI ID Number Set the SCSI Terminator Connect the Scanner to Your Computer Power On Your System Install the SCSI Software If You’re Running Win
Install EPSON TWAIN Pro If You’re Running Windows. . . If You’re Using a Macintosh. . . Install the ISIS Driver Install MonacoSCAN 2.6 If You’re Running Windows. . . If You’re Using a Macintosh. . . Install Adobe Photoshop 5.0 LE If You’re Running Windows. . . If You’re Using a Macintosh. . .
vi VIEWING YOUR ELECTRONIC MANUALS Installing Adobe Acrobat Reader If You’re Running Windows. . . If You’re Using a Macintosh. . .
Scanning for Professional Results The EPSON® Expression® 836XL is a 36-bit, large-format professional scanner designed to deliver superior results for artists, graphics professionals, and business graphics users. Using EPSON’s ColorTrue® Imaging System, the scanner captures images with amazing detail and accurate colors. Its 800 × 1600 dpi optical resolution and tabloid-size scan bed (12.2 × 17.2 inches) let you scan incredibly sharp images from practically any source.
About Your Software The EPSON Expression 836XL scanner includes these leading-edge applications for professional-quality scans: EPSON TWAIN Pro Ideal general-purpose driver for scanning from hundreds of applications. Includes Text Enhancement Technology (TET) and Auto Area Segmentation (AAS) for better scans. Pixel Translations® ISIS® driver (Windows only) Industry-standard interface for high-performance document scanning, either with or without the optional auto document feeder.
About Your Documentation This guide includes instructions for setting up your scanner and software, installing the optional TPU and ADF, and viewing your electronic manuals, plus scanning tips and troubleshooting advice. For instructions on using the optional equipment, see your EPSON Expression 836XL User’s Guide in the Manuals folder on the EPSON Expression 836XL Scanning Tools CD-ROM.
Warnings, Cautions, Notes, and Tips Please follow these guidelines as you read your documentation: Warnings must be followed carefully to avoid bodily injury. Cautions must be observed to avoid damage to your equipment. Notes contain important information about your scanner. Tips contain additional hints for great scanning.
System Requirements The minimum system requirements for Windows and Macintosh are listed below. For optimum performance, a faster processor and more memory are recommended. If you are scanning high resolution images, you need more than the minimum available hard disk space listed. Windows ■ An IBM® compatible PC with a 486/66 MHz or faster processor, Pentium® or higher for MonacoSCAN ■ Microsoft® Windows 95, Windows 98, or Windows NT® 4.
Macintosh ■ PowerPC™ or higher processor including blue G3 (iMac™ is not supported) running system 7.5 (system 8.
Important Safety Instructions Read all of these instructions and save them for later reference. Follow all warnings and instructions marked on the scanner. ■ Unplug the scanner before cleaning. Clean with a damp cloth only. Do not spill liquid on the scanner. ■ Do not place the scanner on an unstable surface or near a radiator or heat source. ■ Do not block or cover the openings in the scanner’s cabinet. Do not insert objects through the slots.
8
Setting Up Your Scanner Setting up your scanner is easy—just follow the simple steps in this book in the order listed below. 1. Unpack and choose a place for your scanner. 2. Install the SCSI interface board (if necessary). 3. Unlock the scanner. 4. Set the SCSI ID number. 5. Connect the scanner to your computer. 6. Power on your scanner, then power on your computer. 7. Install the SCSI software and scanner software. 8. Install MonacoSCAN, LaserSoft SilverFast 4.0, and Adobe Photoshop 5.0 LE (optional). 9.
Unpack Your Scanner Remove the scanner from the box, then remove the packing material from your scanner. Save the packaging in case you need it later. Your EPSON Expression 836XL comes with these items: EPSON Expression 836XL Scanning Tools CD-ROM Adobe Photoshop 5.0 LE CD-ROM* scanner LaserSoft SilverFast 4.
Choose a Good Place for Your Scanner Here are some points to consider: ■ Place the scanner on a flat, stable surface. If the scanner is tilted, it can’t operate properly. ■ Make sure to place the scanner where you can easily unplug the power cord, and where the SCSI cable can reach your computer. ■ Keep the scanner away from direct sunlight and strong light sources. ■ Be sure there’s enough room behind the scanner for the cables, and above the scanner so you can fully raise the document cover.
Install the SCSI Interface Board You must install your SCSI board before installing the scanner driver and software applications. If you have a Macintosh with a SCSI interface, or if you already have a SCSI board installed in your PC, skip this section. For additional installation information, see your computer documentation. 1. Turn off the computer and any peripheral devices. Unplug any power cords; then disconnect all cables from the back panel of your computer. 2.
Unlock the Scanner Before connecting the scanner to a power source, you must release the transportation lock, located on the left side of the scanner. Use a coin or large flat-head screwdriver to turn the transportation lock screw to the unlocked position, as shown. Always lock the scanner before transporting it; otherwise, the scanner may be damaged. Be sure the scanner lamp is in the home position. To ensure this, always turn off the scanner before locking the carriage.
Set the SCSI ID Number The scanner is preset at the factory to SCSI ID 2. If you need to change this number, turn the SCSI ID switch on the back panel. Be sure to choose a unique number that doesn’t conflict with the ID number of other SCSI devices. Don’t use SCSI ID 7, which is usually reserved for the SCSI interface in the computer. SCSI ID 0 and 1 are also not recommended, as these may be used for the hard disk. If you select the asterisk (*), the scanner won’t work.
Set the SCSI Terminator The scanner’s SCSI terminator is built in, with a switch to turn it on or off on the scanner’s back panel. If the scanner is your only SCSI device or the last device in the chain, leave the terminator turned ON (the default setting). ON OFF SW ON OFF SW If the scanner is in the middle of a chain, turn the switch OFF.
Connect the Scanner to Your Computer Make sure the scanner, computer, and any SCSI devices connected to your computer are turned off. The scanner is off when the P OPERATE button is out (not pushed down below the surface of the front panel). 1. Locate the SCSI cable that came with your scanner. 2. Squeeze the lock releases on the lock connector end of the SCSI cable and plug the cable into either SCSI connector on the back of the scanner. The cable is secure when both connector locks snap in. 3.
Power On Your System Always press the P OPERATE button to turn on your scanner before you turn on the computer. Otherwise, the computer may not recognize your EPSON scanner when you install your software. OPERATE button READY light OPERATE light As the scanner initializes, the OPERATE light on the scanner’s front panel comes on. After a few seconds, the READY light comes on.
If You’re Running Windows 95 or Windows 98. . . Depending on how your computer system was originally set up, you may be asked to insert your Windows operating system CD-ROM during software installation. Please have your Windows CD-ROM handy, in case it is needed. 1. Turn on your scanner first; then turn on your computer. A message appears saying that your system has detected new hardware. If your system doesn’t automatically detect the SCSI board, run EZ-SCSI, a special Windows SCSI configuration utility.
5. When you see a screen indicating that Windows is ready to install the best driver for this device, click Next to begin driver installation. 6. If your system stops installation to request the file AIC78XX.MPD, use the Browse function to go to D:\Adaptec\Win9x (where D: is your CD-ROM drive). Or, insert your Windows operating system CD-ROM and click OK to continue. 7. When you see a screen indicating that installation is complete, click Finish.
You see the dialog box on the right. 3. Click the Drivers tab. Then click the Add button. After a moment, you see the Install Driver dialog box. 4. In the Manufacturers list, click Adaptec.
5. In the SCSI Adapter list, click Adaptec AHA-294X/AHA-394X or AIC-78XX PCI SCSI Controller. 6. Click OK. If you see a prompt to install the Windows NT CD-ROM, insert it and click OK. Or use the Browse function to go to D:\Adaptec\Win NT\Winnt\4_0 (where D: is your CD-ROM drive). The necessary driver files are copied to your hard drive, then you see a prompt to restart your system. 7. Click Yes. Be sure to close any open windows to restart. 8. After the system restarts, log on again.
If You’re Using a Macintosh. . . If you installed the SCSI board that came with the scanner in your Macintosh, you need to install its driver software. 1. Turn on your Macintosh and disable any anti-virus programs. 2. Insert the EPSON Expression 836XL Scanning Tools CD-ROM in your drive. 3. Double-click the CD-ROM icon to open the CD-ROM window, then double-click the Adaptec AVA-2903B Installer icon in the Adaptec folder. 4. At the first screen, click Install. The driver is installed. 5.
5. After installing the software, click Next to open the EPSON TWAIN Pro Setup window. 6. If it’s not already selected, choose the interface to which you connected the scanner: SCSI or BiD Parallel. Windows automatically detects your SCSI ID. 7. If you’ve changed the SCSI ID, select the new ID in the Port Id listbox. If you’re using the parallel interface, select one of the following as the Port Id setting: Port 378 (for LPT1) Port 278 (for LPT2) Port 3BC (for LPT3) 8.
You won’t need to change the screen calibration as long as you continue to use the same display. If you need to recalibrate your screen at a later time, select Screen Calibration in the EPSON Scanner folder. 11. Click OK to exit the setup program. You can now install any additional software that came with your scanner. See the instructions for installing the ISIS driver (page 26), MonacoSCAN (page 27) and Adobe Photoshop 5.0 LE (page 29). For instructions on installing the SilverFast 4.
You see the Screen Calibration window. before calibration after calibration 7. Move the slider until the shades of the horizontal gray stripes appear similar. View the screen from a short distance. The gray stripes will not perfectly blend together; however, try to make the two tones match as closely as possible. 8. Click OK to register the calibration setting. 9. Click OK to exit the setup program, then restart your Macintosh.
Install the ISIS Driver The ISIS driver for the Expression 836XL is designed for high-performance OCR scanning (Windows only), either with or without the optional auto document feeder. You can use this driver with any application that supports ISIS drivers, such as Adobe Acrobat Capture.® Before you install the driver, make sure you install the application you intend to use it with, and select the EPSON ISIS driver. Then follow these steps: 1.
Install MonacoSCAN 2.6 This utility lets you create a unique input profile for your scanner, which you can use with all color-managed applications. If your scanner didn’t come with MonacoSCAN, skip to page 31. If You’re Running Windows. . . 1. Turn on your computer and make sure no applications are open. 2. Insert the EPSON Expression 836XL Scanning Tools CD-ROM in your drive. 3. Click Start, Run, then use the Browse function to go to D:\ MonacoScan 2.6 (where D: is your CD-ROM drive). Select Setup.
If You’re Using a Macintosh. . . 1. Start your Macintosh and turn off any virus protection programs you’re using. 2. Insert the EPSON Expression 836XL Scanning Tools CD-ROM in your drive. 3. Double-click the CD-ROM icon to open the CD-ROM window, if necessary. Then open the MonacoSCAN 2.6 folder. 4. Double-click the MonacoSCAN 2.6 Installer icon. The MonacoSCAN title screen appears. 5. Click Continue. You see the software license agreement. 6. Read the agreement and click Continue to accept it. 7.
Install Adobe Photoshop 5.0 LE To find out how to upgrade to the full version of Adobe Photoshop 5.0, see the Acrobat file titled Upgrade.pdf on the Adobe Photoshop 5.0 LE CD-ROM (you must have Acrobat Reader installed to view this file). If your scanner didn’t come with Adobe Photoshop, skip to page 31. If You’re Running Windows. . . 1. Insert the Adobe Photoshop 5.0 LE CD-ROM in your drive. 2. Click Start, Run, and then use the Browse function to go to D:\Photosle, where D: is your CD-ROM drive.
If You’re Using a Macintosh. . . 1. Insert the Adobe Photoshop 5.0 LE CD-ROM in your drive. 2. Double-click the Adobe Photoshop 5.0 LE CD-ROM icon, then double-click the Adobe Photoshop 5.0 LE folder. 3. Double-click the Install Photoshop® LE icon. You see the Adobe PhotoShop 5.0 LE Installer banner. 4. Choose the country you are in and click OK. You see the License Agreement. 5. Read the agreement and click Accept. 6. Follow the instructions on the screen until you see the registration screen.
How to Scan This section gives you an overview of the scanning process and some tips for getting the best scan. It also includes step-by-step scanning instructions. Scanning an image allows you to reproduce it many times with little or no loss of quality. You can also enlarge, reduce, or change the color of the image without affecting your original. As with most projects, planning ahead can save you time. Scanning is a multi-step process, as shown in the following chart.
Scanning Tips Getting the best scan possible depends on several factors, including the quality of your original and the resolution you select. The better your original is, the better your scan will be. While you can make some corrections in your scanning software, you’ll need to do major photo retouching in a program such as Adobe Photoshop to correct or mask problems such as a coffee stain on the original image.
Scaling (Resizing) Images If you plan to enlarge your image, it’s better to enlarge it by scanning at a higher resolution rather than adjusting resolution in your application. Each time you modify an image, you lose some image quality. Keep in mind when you enlarge a small photo, such as 35 mm slides or wallet-size photos, you’ll need to scan at a high enough resolution to retain your image quality, but not so high that your file size is too large to be efficient.
“Beginning Your Scan” on page 36 shows you how to select a driver and settings. For details on using EPSON TWAIN Pro, see your electronic EPSON TWAIN Pro User’s Guide on your EPSON Expression 836XL Scanning Tools CD-ROM. For details on using LaserSoft SilverFast 4.0, see the electronic documentation on the LaserSoft SilverFast 4.0 CD-ROM. Recommended Settings Here are some recommended settings for different types of scans.
Step-by-Step Scanning Instructions This section contains step-by-step instructions for scanning an image. Although the Macintosh interface is shown, the Windows steps are the same. Placing Your Original Document 1. Raise the scanner cover and place your document face down on the document table. If you’re scanning a transparency, the optional transparency unit should be installed (see page 48). 2.
Beginning Your Scan Scans are always performed from within a host application (the application into which you plan to import the scanned image or document). You have to start this application before you can access your scanner software. Once you’ve opened your application and selected your scanner driver, continue with the instructions under “Scanning with EPSON TWAIN Pro” below or “Scanning with LaserSoft SilverFast 4.0” on page 39.
3. Open the scanner software. For example, choose Import from Photoshop 5.0 LE’s File menu. In Windows, select TWAIN_32. On a Macintosh, select TWAIN_Acquire. The EPSON TWAIN Pro main window appears. 4. Choose the Document Source, Image Type, and Destination. Preview button For example, if you’re scanning a photograph, select Flatbed as Scan button your Document Source, 24-bit Color (Std) as your Image Type, and your printer as the Destination.
Generally it’s a good idea to use the Auto Exposure button to obtain the best settings for your scan. If you’re not satisfied with the results, see the recommended settings on page 34, or see your electronic EPSON TWAIN Pro User’s Guide for more information about choosing settings. If you need to remove color cast from your image, use the Gray Balance Intensity feature. If you’re not scanning a flat document, you’ll also need to adjust the focus position.
Scanning with LaserSoft SilverFast 4.0 LaserSoft SilverFast 4.0 provides a professional-quality interface between your EPSON Expression 836XL scanner and the sophisticated imaging environment of Adobe Photoshop. If your scanner didn’t come with SilverFast, skip to page 41. 1. Start Photoshop. 2. Choose Import from the File menu and select SilverFast (Epson). The personalization dialog box appears. 3.
8. Click the Auto Adjust button to automatically correct the highlight, shadow, and midtones. If you want to further optimize your image’s colors, brightness and other characteristics, you can use SilverFast’s powerful correction and filtering tools. For more information, see your electronic LaserSoft SilverFast User’s Guide. SilverFast automatically removes color casts from images.
Viewing Your Electronic Manuals You always have easy access to your electronic manuals. If Adobe Acrobat Reader 4.0 is installed on your computer, you can open any of the Acrobat files in the Manuals folder on your EPSON Expression 836XL Scanning Tools CD-ROM. Just open the folder for the manual you want to view, then double-click the file (Acrobat files always have a pdf extension).
Installing Adobe Acrobat Reader Follow these instructions to install Adobe Acrobat Reader 4.0. If you have an earlier version of Acrobat Reader on your system, you should uninstall it before you install Adobe Acrobat Reader 4.0. If You’re Running Windows. . . 1. Insert the EPSON Expression 836XL Scanning Tools CD-ROM in your drive. 2. Click Start, then Run. 3. Use the Browse function to navigate to your CD-ROM drive. Then go to the Manuals\Acrobat Reader 4.0 folder. 4. Select Ar40eng.exe and click Open.
If You’re Using a Macintosh. . . 1. Insert the EPSON Expression 836XL Scanning Tools CD-ROM in your drive. 2. Double-click the CD-ROM icon. 3. Double-click the Manuals folder, then double-click the Adobe Acrobat Reader 4.0 folder. 4. Double-click the Reader Installer icon. You see the Reader 4.0 Installer banner. 5. Click Continue. You see a screen describing the plug-ins that are installed with Acrobat Reader. Click Install. 6. Follow the instructions on the screen to complete the installation. 7.
Navigating a Manual When you open an electronic manual, you’ll see this toolbar: Show navigation pane First page Previous page Last page Next page With Acrobat Reader, you have several ways to navigate through text: ■ Click on hot topics, which are usually underlined or displayed in a different color. To find out if a topic is hot, move your cursor over it. If the cursor turns into a pointing hand, the topic is hot—you can jump to it by clicking once.
Setting Up the TPU and ADF Units Two optional accessories are available for the EPSON Expression 836XL: the transparency unit (B813102) and the auto document feeder (B813112 or 836XL-ADF). You can purchase these options from your reseller or from EPSON Accessories at (800) 873-7766 (U.S. sales only). In Canada, please call (800) 873-7766 for dealer referral. Or visit our web site at www.epsonsupplies.com (U.S. sales only).
Unpacking the Transparency Unit Make sure all these items are included in the box with the TPU. Contact your EPSON dealer if anything is missing or damaged.
Removing the Shipping Screws To prevent damage during shipping, screws are attached to the TPU to secure its lamp assembly. You must remove these screws before using the TPU. To avoid damaging the TPU, make sure you don’t leave either of the shipping screws in place when you use the unit. 1. Turn the TPU so the glass side faces up. storage holes 2. Use a Phillips (cross head) screwdriver to remove both shipping screws from the holes labeled CLAMP, as shown: 3.
Installing the Transparency Unit 1. Make sure the scanner is turned off. Then unplug the power cable from the scanner. 2. Remove the document cover by grasping it beside the hinges and lifting it straight up. 3. Align the TPU hinge pins with the holes in the scanner, then lower the TPU until the pins rest securely in the holes. 4. Close the TPU. To avoid damaging the TPU, do not place heavy objects on it. 5. Attach the TPU connector to the option connector at the back of the scanner.
Installing the Transparency Guide Follow the steps below to install the transparency guide: 1. Lift the TPU. 2. If your scanner doesn’t already have a guide pin and adjust pin installed, insert the guide pin and adjust pin that came with the TPU. Make sure the adjust pin’s arrow faces the guide pin. arrow guide pin adjust pin 3. Place the transparency guide above the scanner’s document table over the pins as shown. Make sure the oval hole is on the right.
You must install the transparency guide to ensure that your originals are correctly positioned. Otherwise, transparencies may cover the calibration area on the left side of the glass and cause scanning errors. For more information, see your electronic EPSON Expression 836XL User’s Guide. Auto Document Feeder The auto document feeder (ADF) automatically loads multi-page documents into your scanner. It is particularly useful for OCR (optical character recognition) scanning or for creating an image database.
Installing the Auto Document Feeder Before installing the ADF, be aware that it is large and heavy. Clear a wide space around the scanner before unpacking and installing the ADF. You may need to have someone help you lift it. 1. Make sure your scanner is turned off, then unplug the scanner’s power and interface cables. 2. Remove your scanner’s document cover by grasping it beside the hinges and lifting it straight up. 3.
5. Place the ADF on the scanner, lining up the screws with the holes as shown: . The ADF is heavy, so you may need to have someone help you lift it. 6. Twist the knobs onto the ends of the screws and tighten them using the enclosed screwdriver. 7. Attach the ADF’s connector to the scanner’s option interface. Secure the connection by tightening the connector screws.
8. Peel off the backing from the stopper and from the paper out support provided with the ADF. Then attach the stopper and paper out support to the scanner as shown. Insert the tabs on the paper out support into the slots at the right end of the document table. paper out support stopper If the ADF misfeeds, first make sure the stopper and paper out support are in place and correctly installed. 9. Close the ADF and reattach all the scanner cables. Then turn on the scanner.
54
Problems? Need Help? This chapter gives you the basics for diagnosing and solving scanner problems. For additional solutions, see the “Troubleshooting” sections of your electronic EPSON TWAIN Pro User’s Guide and EPSON Expression 836XL User’s Guide. If none of the suggestions solve your problem, see “Where To Get Help” on page 62.
Setup Problems If your system doesn’t recognize the scanner. . . If your system doesn’t recognize the SCSI board (Windows only). . . ■ Make sure your scanner is on. If you opened your host application before you turned on the scanner, close your application and reopen it. If that doesn’t work, restart your system. ■ Check the Plug and Play option for your computer (Windows only); it should be active. ■ Make sure your SCSI board is installed correctly.
If Expression 836XL doesn’t appear in the Port Id dialog box in the EPSON TWAIN Pro Setup window (Windows only). . . ■ Make sure your system is correctly cabled and terminated and there are no conflicting SCSI IDs. ■ Go to Control Panels, System, Device Manager. Double-click the Unknown Devices icon. Select Expression 836XL and remove it from the system. Restart your computer. Then reinstall the scanner software.
If you installed a ZIP drive. . . Your ZIP drive may be interfering with your scanner. Disable the ZIP drive in the System Device Manager in the Windows Control Panel, then try using your scanner. ■ Check your SCSI board installation. Make sure that the SCSI interface board is installed correctly in your computer. See page 12 for installation instructions. ■ Check that your system recognizes your scanner and SCSI board. Check System Device Manager in the Windows Control Panel. For Windows NT 4.
If the scanner software doesn’t work properly. . . ■ Make sure the system requirements (for example, the operating system version) are correct for your software. See page 5. ■ Check your computer’s memory. See if the computer has enough memory for your software. If you’re running other software at the same time, using RAM resident programs, or have many device drivers, the computer may not have enough memory. (See your software and computer manuals.
If your scanned image is faint or has gaps. . . 60 ■ Check the brightness. Decrease the software or driver’s brightness setting. ■ Try adjusting the Gamma setting. ■ Check the condition of your original. If the document is damaged, dirty, or wrinkled, these imperfections will show up in your scan. If your scanned image is blurred or distorted. . . ■ Check the position and condition of your document. Make sure the document is placed flat against the scanner’s document table glass.
If the edges of the document are not scanned. . . Check the position of your source document. Adjust your document’s position so that the image is within the glass area. If your image scans at an angle. . . Check the position of your source document. It may be placed at an angle on the document table. Align it so the horizontal and vertical edges are carefully aligned with the scales on the top and side of the document table.
Where To Get Help EPSON Technical Support EPSON provides technical assistance through electronic support services and automated telephone services 24 hours a day. The following tables list the contact information: Electronic support services Service Access World Wide Web From the Internet, you can reach EPSON’s Home Page at http://www.epson.com. EPSON Internet FTP Site If you have Internet FTP capability, use your Web browser (or other software for FTP downloading) to log onto ftp.epson.
To speak to a technical support representative, dial (310) 974-1970 (U.S.) or (905) 709-3839 (Canada), 6 AM to 6 PM, Pacific Time, Monday through Friday. Toll or long distance charges may apply.
64
Index A E Accessories, 63 Adaptec SCSI board installing, 12 software, installing, 17 to 22 ADF, see Auto document feeder Adjust pin, 49 Adobe Acrobat Capture, 26 Adobe Acrobat Reader, 44 Adobe Photoshop LE, installing, 29 to 30 Auto Adjust button, 40 Auto document feeder, 50 to 53 Auto Exposure button, 37 Auto Locate button, 37 Electronic manuals, 41 to 44 EPSON Accessories, 63 help, 62 to 63 EPSON TWAIN Pro installing, 22 to 25 scanning with, 36 to 38 Exposure setting, 37, 40 EZ-SCSI, 18, 56 F File siz
Installing SCSI interface board, 12 software, 17 to 30 ISIS driver, installing, 26 L LaserSoft SilverFast, 39 to 40 Lock, transportation, 13 M Macintosh installing SCSI board, 12 installing software, 24 to 25, 28, 30 system requirements, 6 Manuals, viewing electronic, 41 to 44 Marquee, setting scan area, 37, 39 MonacoSCAN, installing, 27 to 28 O OCR scanning, 26, 34 OPERATE button and light, 17 Option connector, 48, 52 Optional equipment, 45 to 53 P Paper out support, installing, 53 PCI SCSI interface b
Screen calibration, 23 to 25 Screws, shipping scanner, 13 transparency unit, 13, 47 SCSI configuring the SCSI board, 56 connecting cable, 16 ID number, 14, 57 installing interface board, 12 installing software, 17 to 22 setting terminator, 15 Service, 62 to 63 Settings, software, 34 Setup problems, 56 to 57 Shadow setting, 37, 40 SilverFast, 39 to 40 Software problems, 58 to 59 Software settings, 34 Software, installing Macintosh, 24 to 25, 28, 30 Windows, 17 to 24, 29 Source, selecting, 33 Space requiremen