Setup guide

13
Unlock the Scanner
Before connecting the scanner to
a power source, you must release
the transportation lock, located
on the left side of the scanner.
Use a coin or large flat-head
screwdriver to turn the
transportation lock screw to the
unlocked position, as shown.
Always lock the scanner before transporting it; otherwise, the
scanner may be damaged. Be sure the scanner lamp is in the
home position. To ensure this, always turn off the scanner
before locking the carriage. See your electronic EPSON
Expression 836XL User’s Guide for more information.
If you have the transparency
unit, you need to remove the
shipping screws before you
scan.
See page 48 for more
information.
To avoid damaging the TPU, make sure you remove both of
the shipping screws.
shipping
screws