Setup guide

17
Power On Your System
Always press the
P
OPERATE
button
to turn on your scanner before you turn
on the computer. Otherwise, the
computer may not recognize your
EPSON scanner when you install your
software.
As the scanner initializes, the OPERATE light on the scanner’s
front panel comes on. After a few seconds, the READY light
comes on.
Install the SCSI Software
The EPSON Expression 836XL Scanning Tools CD-ROM includes the
Windows 95, Windows 98, Windows NT, and Macintosh drivers for your SCSI
board. You need to install the SCSI software for your system before you can use your
scanner.
Before you begin, make sure your SCSI board is installed, and your scanner is
attached to the computer.
If you have a Macintosh with a SCSI interface, or if you already have a SCSI board
installed in your PC, skip this section.
READY
light
OPERATE
light
OPERATE button