Setup guide

18
If You’re Running Windows 95 or Windows 98. . .
Depending on how your computer system was originally set up, you may be asked to
insert your Windows operating system CD-ROM during software installation. Please
have your Windows CD-ROM handy, in case it is needed.
1. Turn on your scanner first; then turn on your computer. A message appears
saying that your system has detected new hardware.
If your system doesn’t automatically detect the SCSI board,
run EZ-SCSI, a special Windows SCSI configuration utility.
Insert your EPSON Expression 836XL Scanning Tools
CD-ROM in your drive. Click Start, then click Run. Type
D:\Adaptec\Ezscsi\Setup in the textbox (where D: is your
CD-ROM drive), then click OK.
2. Click
Next
. You see the screen to the
right.
3. Make sure
Search for the best driver
for your device
is selected. Insert the
EPSON Expression 836XL Scanning
Tools CD-ROM in your drive, then
click
Next
.
4. When you see the screen to the right
prompting you for the location of the
driver, check
Specify a location.
Then use the Browse function
to specify:
D:\Adaptec\Win9x
(where
D:
is your CD-ROM drive).