Setup guide

19
5. When you see a screen indicating that
Windows is ready to install the best
driver for this device, click
Next
to
begin driver installation.
6. If your system stops installation to
request the file
AIC78XX.MPD
, use
the Browse function to go to
D:\Adaptec\Win9x
(where
D:
is your
CD-ROM drive). Or, insert your
Windows operating system CD-ROM
and click
OK
to continue.
7. When you see a screen indicating that installation is complete, click
Finish.
The
Add New Hardware Wizard closes, and you return to the Windows desktop.
8. Verify that the scanner is listed in the Windows Device Manager. (Click
Start
,
Settings
,
Control Panel
, then double-click the
System
icon. Select the Device
Manager tab and click
SCSI Controllers
. You should see your
Adaptec PCI SCSI
Controller
in the list.)
If You’re Running Windows NT 4.0. . .
Depending on how your computer system was originally set up, you may be asked to
insert your Windows NT CD-ROM during the scanner installation. Please have your
CD-ROM handy, in case it is needed.
Before you start, turn on your scanner, then turn on your computer.
1. Log onto Windows NT. After you see the Windows desktop icons, click
Start
,
Settings
,
Control Panel
.
2. Double-click
SCSI Adapters
.