Setup guide

21
5. In the SCSI Adapter list, click
Adaptec AHA-294X/AHA-394X or
AIC-78XX PCI SCSI Controller
.
6. Click
OK
. If you see a prompt
to install the Windows NT
CD-ROM, insert it and
click
OK
. Or use the Browse
function to go to
D:\Adaptec\Win NT\Winnt\4_0
(where
D:
is your CD-ROM
drive).
The necessary driver files are copied to your hard drive, then you see a prompt to
restart your system.
7. Click
Yes
. Be sure to close any open windows to restart.
8. After the system restarts, log on again. Windows NT auto-detects the scanner.
9. To verify that the scanner was detected, click
Start
,
Settings
,
Control Panel
,
SCSI
Adapters
. Then click the
Devices
tab if necessary. You should see your
Adaptec
PCI SCSI Controller
in the list. Click
OK
to close the dialog box.