Setup guide

If You’re Using a Macintosh. . .

If you installed the SCSI board that came with the scanner in your Macintosh, you

need to install its driver software.

1. Turn on your Macintosh and disable any anti-virus programs.

2. Insert the EPSON Expression 836XL Scanning Tools CD-ROM in your drive.

3. Double-click the CD-ROM icon to open the CD-ROM window, then

double-click the

Adaptec AVA-2903B Installer

icon in the

Adaptec

folder.

4. At the first screen, click

Install

. The driver is installed.

5. When you see the message that installation was successful, click

Restart.

Continue with the instructions in the next section to install EPSON TWAIN Pro so

you can test your scanner.

Install EPSON TWAIN Pro

Before you begin, make sure your SCSI board and SCSI driver are installed (if

necessary) and the scanner is connected to your computer.

If You’re Running Windows. . .

1. Turn on your scanner and wait for the

READY

light to come on. Then turn on

your computer and turn off any virus protection programs you’re using.

2. Insert the EPSON Expression 836XL Scanning Tools CD-ROM in your drive.

3. Click

Start

Run

, then use the Browse function to go to

D:\Epson\Epson TWAIN Pro\Disk1

(where

is your CD-ROM drive). Select

Setup.exe

and click

Open

, then click

to run the installation program.

4. Follow the instructions on the screen to install EPSON TWAIN Pro and create

an EPSON Scanner program group.