Setup guide

26
Install the ISIS Driver
The ISIS driver for the Expression 836XL is designed for high-performance OCR
scanning (Windows only), either with or without the optional auto document feeder.
You can use this driver with any application that supports ISIS drivers, such as Adobe
Acrobat Capture.
®
Before you install the driver, make sure you install the application you intend to use it
with, and select the EPSON ISIS driver. Then follow these steps:
1. Insert the EPSON Expression 836XL Scanning Tools CD-ROM in your drive.
2. Click
Start, Run,
then use the Browse function to go to
D:\ISISv193
(where
D:
is
your CD-ROM drive).
3. Select
Setup.exe
and click
Open.
Then click
OK
. You see the welcome dialog
box.
4. Click
Next.
If you’re using Windows NT, you see a message about installing ASPI32. Select
Yes
and click
Next.
The driver files are installed.
5. When you see the Installation Completed message, click
Finish
.
If you’re using Windows NT, you see a message about installing the ASPI layer.
Click
Continue
, then click
Reboot.
If you’re not using the driver with Acrobat Capture, open the following file for
information about installing the driver for other applications:
\WINDOWS\PIXTRAN\APPINSTL.WRI (Windows 95/98)
\WINNT\PIXTRAN\APPINSTL.WRI (Windows NT 4.0)
Follow the instructions in this file and the documentation that came with your
application program to configure and use the ISIS driver. The instructions cover
Caere
®
OmniPage
®
Pro, Xerox
®
TextBridge,
®
and several other applications.
For more information about using the driver and configuring Acrobat Capture, see
the electronic
ISIS Driver User’s Guide
.