Setup guide

38
Generally it’s a good idea to use the Auto Exposure button to
obtain the best settings for your scan. If you’re not satisfied with
the results, see the recommended settings on page 34, or see
your electronic EPSON TWAIN Pro User’s Guide for more
information about choosing settings.
If you need to remove color cast from your image, use the Gray
Balance Intensity feature. If you’re not scanning a flat document,
you’ll also need to adjust the focus position. See your electronic
EPSON TWAIN Pro User’s Guide for more information about
adjusting Gray Balance Intensity.
7. When you’ve finished making adjustments, click the
Scan
button.
The
READY
light on the front of the scanner flickers while it’s scanning. In a few
moments, a scanned image is imported into your host application’s window.
(If the
READY
light continues to blink, it may indicate an error condition. See
your electronic
EPSON TWAIN Pro User’s Guide
for more information.)
8. Click the close box to close the EPSON TWAIN Pro window and return to your
application.
Don’t leave photographs on the document table for long
periods of time; they may stick to the glass.