Setup guide

Installing the Auto Document Feeder

Before installing the ADF, be aware that it is large and heavy.

Clear a wide space around the scanner before unpacking and

installing the ADF. You may need to have someone help you

lift it.

1. Make sure your scanner is turned off, then

unplug the scanner’s power and interface

cables.

2. Remove your scanner’s document cover by

grasping it beside the hinges and lifting it

straight up.

3. Insert the installation

screws that came with

the ADF into the holes

in the back of the

scanner and secure them

with the enclosed

screwdriver, as shown.

4. Place the two knobs

included with the ADF

beside the scanner.