Intelligent Controller User's Guide Information on the Moverio Website Check the following Website for useful tips and support information. https://tech.moverio.epson.com/en/ See the User's Guide supplied with the headset for precautions on using the headset © 2020 Seiko Epson Corporation 2020.
Introduction This product is a controller that connects to the EPSON smart glass MOVERIO series headset and uses an app to display and share information. It supports models with USB Type-C connectors. The MOVERIO series has see-through lenses that allow you to create your own world using AR (Augmented Reality) which lays images over your actual surroundings. Please note that we cannot guarantee connection to commercially available, third-party devices.
Contents Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Product Warnings and Cautions. . . . . . . . . . . . . . . . . . . . . . . . . 5 Warnings and Cautions when Using the Headset. . . . . . . 11 Switching modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Mode Types. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
About the User's Guide This guide provides information on safely using this product, basic operating methods, and troubleshooting. Make sure you read this guide before using the product. Symbols Used in this Guide oSafety symbols Warning This symbol indicates information that, if ignored, could possibly result in serious personal injury or even death due to incorrect handling.
Safety Instructions For your safety, read the attached documents carefully to use the product correctly. After you have read the documents, keep them in a safe place so that you can refer to them quickly at a later date. Product Warnings and Cautions Warning Charging precautions When charging, use a commercially available USB Type-C power adapter that has received public safety standards certification and meets the necessary specifications of this product.
Safety Instructions Do not allow any conductive foreign objects to touch the USB TypeC connector, microSD card slot, or earphone jack, and do not put any conductive foreign objects into the connection ports. Doing so may cause a short circuit and result in fire or electric shock. Do not use a damaged USB cable. Failure to comply with these precautions could result in fire or electric shock. Do not subject the product to excessive pressure or damage it.
Safety Instructions ing a cable that is not USB certified could result in fire, burns, electric shock, or damage to the product due to incorrect wiring. • If the product was dropped or the case was damaged. For your own safety, do not use a conversion adapter or extension cable when using the USB Type-C connector. (Except for genuine Epson optional products) Stop using the product if the product itself or the cable is damaged. Otherwise, it may result in fire or electric shock.
Safety Instructions magnetic waves if there is any electronic medical equipment in the area. Caution Usage environment and condition precautions • Follow any rules stipulated by medical institutions that prohibit the use of devices emitting electromagnetic waves, or that prohibit entry to certain areas with such devices. Do not use in the following locations. • If the product has an auto power on function, disable it before turning off the product.
Safety Instructions during charging. Furthermore, do not allow the product to remain in contact with your skin for too long, even while wearing the product, as doing so may result in low temperature burns. Just like computers, when the user installs an app or accesses a Website, this device may become unstable, or sensitive data, such as the user's location information or personal information registered to the device, could be illegally leaked over the Internet by malicious third parties.
Safety Instructions slot cover are closed securely, this product is water-proof compliant with the IPX2 standard based on JISC0920 (IEC60529:2001). However, when a headset is connected to the USB Type-C connector (for headset connections), the connection does not provide IPX2 levels of performance.
Safety Instructions Warnings and Cautions when Using the Headset Warning Product usage precautions • Malfunction or erroneous operations may occur depending on the usage environment and how the product and the headset are used. Note that Epson is not responsible for any damages arising from the use of the product, headset, or drone. • Note the following precautions when using this product and headset while operating a drone.
Safety Instructions Caution Product usage precautions When connecting/disconnecting the headset's USB Type-C connector, do not handle it with wet hands or expose it to water or dust. The headset uses an Si-OLED display panel (organic EL panel). Due to the characteristics of the Si-OLED, you may notice burn-in (after images) or decreasing luminance on the panel. This is not a malfunction.
Notes on Usage Be sure to consider other people when using this product in public locations. Charge the battery at least once a year even if you do not use the product. If you do not use the product for a long period of time, the battery performance may deteriorate or you may not be able to charge the battery. The operating system (OS) for this product may be upgraded to improve quality and add new features.
Included Items & Optional Items Optional Items Included Items BO-IC400 &“Part Names” p. 15 These items are available to purchase according to your needs. These optional items and consumables are current as of May 2020. This list is subject to change without notice. Battery pack USB cable &“Charging” p. 18 SD card slot pin &“Inserting an SD Card” p.
Part Names Front Receiver/Speaker LED indicator Outputs audio. Indicates the status of the product. &“LED indicator status” p. 18 Proximity/dimmer sensor Detects when faces come close to the device or the brightness of your surroundings. Do not cover this part with fabric or stickers. BACK key Displays the previous screen. HOME key Touch panel display Touch with your finger to operate the product. When you switch modes, this functions as a trackpad or Cross-key. &“Operating the Trackpad” p.
Part Names Back LED light Camera Flashes or turns on to indicate the status. Shoots photos or videos. Microphone Speaker This microphone does not input voice commands as it is for noise cancellation. Do not block this part when using the front microphone. Outputs audio. Pogo pins Strap attachment part When using a strap, pass it through this part. 16 Supplies power from this connector when using the optional battery pack (TBD).
Part Names Side Volume keys Adjusts the volume. Power button Turns the power on or off. &“Turning On and Off” p. 19 Switch key Switches the mode. &“Switching modes” p. 23 Hold this down to turn on the key lock feature. Hold it down again to turn off the key lock feature. USB Type-C connector (with cover) Connects the supplied USB cable when charging. &“Charging” p. 18 &“USB Type-C Connector Features” p. 38 microSD card slot Insert a commercially available microSD card. &“Inserting an SD Card” p.
Charging Charge the battery by connecting the USB cable supplied to a commercially available USB Type-C power adapter. Initial charging takes approximately 3 hours when using a USB Type-C power adapter with a 5V/2A output. A Connect this device to a USB Type-C power adapter. Connect the device to a USB Type-C power adapter using the USB cable supplied. You can also charge using the USB Type-C connector at the bottom of the device (for headset connections).
Turning On and Off Turning On Turning Off The product is not fully charged at the time of purchase. Charge before use. A Hold down the Power button for at least two sec- &“Charging” p. 18 onds. A Hold down the Power button for at least two seconds. Select screen. from the menu displayed on the right of the The power turns off. Turning off the screen while the product is on (Sleep mode) Press the Power button briefly to enter Sleep mode.
Setting Wi-Fi/Bluetooth® Wi-Fi settings Bluetooth settings Setup Wi-Fi so that the product can connect to the Internet over a wireless LAN environment. Check the following before setting up. You need to make Bluetooth settings to allow the product to connect wirelessly to Bluetooth enabled devices. Check the following before setting up. • The SSID (network name) for the wireless LAN access point or public wireless LAN service you want to connect to.
Inserting an SD Card The following memory cards are supported by the device. • microSD cards (2 GB maximum) • microSDHC cards (32 GB maximum) • microSDXC cards (2 TB maximum) * A microSD card is not included with this product. A Insert the SD card slot pin into the slot pin insertion hole to open the microSD card slot cover. B Insert the microSD card. C Close the microSD card slot cover.
Connecting the headset Connect the headset cable to the USB Type-C connector on the device (for headset connections). After connecting, the same screen is displayed on the device and in the headset. By pressing the Switch key, you can change the combination of the headset image and the device's screen display. &“Switching modes” p. 23 USB Type-C • See the User's Guide supplied with the headset for details on how to wear the headset.
Switching modes This device has four modes, and you can switch between these modes by pressing the Switch key on the left of the device. When you switch modes, you can operate the touch panel display as a trackpad, or a trackpad with a Cross-key.
Switching modes Mode Types Mirroring mode Trackpad mode This is the default mode. The same screen is displayed in the headset and on the device. Use this mode when you want to use the device’s touch panel display as a trackpad. Images are only displayed in the headset. &“Operating the Trackpad” p.
Switching modes Extended mode Cross-key mode The APPS list screen is displayed on the device, and the screen for the currently open app is displayed in the headset. Use this mode when you want to use the device’s touch panel display as a trackpad with a Cross-key. A trackpad with a Cross-key is a trackpad where half of the touch panel display functions as a Cross-key.
Switching modes Entering Text When you need to enter text, the screen on the device becomes a text input screen. Confirm the entered text, or press the BACK key to return to the previous screen.
Switching modes Operating the Trackpad When you switch to Trackpad mode, the device's touch panel display functions as a trackpad. When you touch the trackpad with your finger, a pointer is displayed on the screen and you can move the pointer to operate the device. oTap Move the pointer to an icon or display item, and then tap the trackpad. This launches applications, selects items, and so on.
Switching modes Operating the Trackpad with a Cross-key In Cross-key mode, half of the touch panel display functions as a Cross-key. Cross-key When you select icons or displayed items, the selected item changes. When you hold down one direction, the screen scrolls in that direction. When you select icons or displayed items, the screen scrolls. Cross-key Enter key Trackpad &“Operating the Trackpad” p. 27 Enter key When an item is selected or confirmed, the app starts.
Introducing MOVERIO Link Pro The "MOVERIO Link Pro" app allows you to make a variety of settings for the headset. The following outlines the main features of the "MOVERIO Link Pro". Available features vary depending on the model of the headset you are using. Feature Setting Description Adjust Brightness Adjust using a slide bar Adjusts the brightness of the headset screen. Adjust Volume Adjust using a slide bar Adjusts the volume.
Introducing MOVERIO Link Pro Initial Startup Settings Checking your license After purchase, tap the MOVERIO Link Pro icon on the APPS list screen. The MOVERIO Link Pro license agreement screen is displayed. Before you can use the MOVERIO Link Pro, you need to check the Software License Agreement and agree to the terms of the agreement.
Introducing MOVERIO Link Pro Launching MOVERIO Link Pro The MOVERIO Link Pro app closes when you disconnect the headset. When you connect the headset, the start screen is displayed as well as a popup note warning you about moving while wearing the headset. Tap [OK] or [Close] to launch the MOVERIO Link Pro app. Tap the MOVERIO Link Pro app icon on the APPS list screen to display the tutorial screen. You can learn more about how to use the app as well as details on each feature.
System Update This product comes with a built-in system update function. If necessary, update to the latest system version before using this device. Follow the steps below to update the system. A Make sure that the device is connected to the Internet. B Tap [ ] on the APPS list screen. C Tap [System] > [Advanced] > [System update] > [Check for update]. 32 Support Information Visit the following Website for information on app development and firmware updates for this device. https://tech.moverio.epson.
Maintenance Cleaning the Charging Connectors • If the charging connectors (USB Type-C connector and pogo pins) on this device are dirty or if there are foreign objects stuck to them, you may not be able to charge or operate the device correctly. Disconnect the USB Type-C power adapter and the USB cable, and wipe off any dirt with a dry cloth or a cotton swab. We recommend cleaning the charging connectors regularly (once every three months).
Troubleshooting If you think a malfunction has occurred, check the following. The product does not turn on • Check that the product is fully charged. • If the battery is dead, the LED indicator does not turn on for a while when charging starts. Charge for at least 30 minutes, and then re-connect the USB cable. &“Charging” p. 18 • Press the Power button for two seconds. When startup begins, the start screen is displayed. When startup is complete, the Home screen is displayed. &“Turning On” p.
Troubleshooting • If the product gets too hot, the brightness of the headset screen may be decreased for safety reasons. • The 2D or 3D display may not be suitable for the images displayed. Switch between 2D or 3D in the pre-installed "MOVERIO Link Pro" app. Cannot operate the device • When you hold down the Switch key, the key lock feature activates and you cannot operate the device. Hold down the Switch key again to release the key lock. • The device may have entered sleep mode.
Specifications Product Specifications Model Number BO-IC400 Exterior dimensions 55 × 110 × 22 mm Mass Approx. TBD g Processor Qualcomm SXR1130 OS Android TM 9 Touch panel display 2.
Specifications Satellite navigation system GPS/GLONASS/Galileo/QZSS/BDS Dust and waterproofing IPX2 Connector ports USB Type-C connector (for headset connections), USB Type-C connector (with cover) &“USB Type-C Connector Features” p. 38 Audio Microphone, receiver, speaker (0.5 W), 3.5 mm audio jack (CTIA standard earphones with microphone compatible)* Battery 3400 mAh, lithium polymer Charging time Approx.
Specifications USB Type-C Connector Features Video output (DP Alt mode compatible) Charging USB 2.0 data transfer USB 3.0 data transfer USB Type-C connector (for headset connections) USB Type-C connector (with cover) - * - The USB Type-C connector (with cover) can only be connected to devices such as a mouse, a keyboard, or a USB memory. Connect the host device, such as a computer, to the USB Type-C connector (for headset connections).
Intellectual Property Rights "EPSON" is a registered trademark of the Seiko Epson Corporation. "EXCEED YOUR VISION" and its associated logo are registered trademarks or trademarks of the Seiko Epson Corporation. microSD logo, microSDHC logo, microSDXC logo are trademarks of SD-3C, LLC. Wi-Fi®, Wi-Fi Direct™, and Miracast™ are the trademarks or registered trademarks of the Wi-Fi Alliance. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
General Notes Notes on Domestic Use Use of this Japanese domestic product overseas is not covered by the guarantee. It may be illegal to sell this product in other countries since it was designed for use in Japan and complies to Japanese safety standards. Additionally, since electromagnetic wave restrictions vary by country and region, using the network function overseas may invoke a penalty. Notes Regarding Wireless LAN Do not use the Wireless LAN function in France unless you are indoors.
General Notes Notes on Frequency This device operates in the same frequency bandwidth as industrial, scientific, and medical devices such as microwave ovens and mobile object identification (RF-ID) systems (licensed premises radio stations, amateur, and unlicensed specified low-power radio stations (hereafter "other radio stations")) used in factory production lines. 1. Before using this product, make sure there are no "other radio stations" being used in the vicinity. 2.
General Notes Authentication Information JAPAN BRAZIL Warning statement for Category II (RF Res. 506): "Este equipamento opera em caráter secundário, isto é, não tem direito à proteção contra interferência prejudicial, mesmo de estações do mesmo tipo e não pode causar interferência a sistemas operando em caráter primário." Warning statement for SAR (SAR Res.
General Notes (v) Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.
General Notes EU The frequency and maximum transmitted power in EU are listed as belows 2.4GHz: 802.11b, 802.11g, 802.11n (HT20), 802.11n (HT40), Bluetooth 5GHz: 802.11a, 802.11ac (VHT20), 802.11ac (VHT40),802.11ac (VHT80) The frequency, mode and the maximum transmitted power in EU are listed below: 2400-2485MHz : 20 dBm IEEE 802.11 b/g/n & BT 2400-2485MHz : 10 dBm BLE 5150-5250MHz : 23 dBm IEEE 802.11 a/n/ac 5250-5350MHz : 23 dBm IEEE 802.11 a/n/ac 5470-5725MHz : 23 dBm IEEE 802.
General Notes RUSSIA RF DoC statement: Подтверждение соответствия Минкомсвязи России: Декларация соответствия № D-MDRD-4618 (Д-МДРД-4618) от 16.02.2017 года, действительна до 16.02.2023 года, зарегистрирована в Федеральном агентстве связи 27.02.2017года TAIWAN Article 12 Without permission, any company, firm or user shall not alter the frequency, increase the power, or change the characteristics and functions of the original design of the certified lower power frequency electric machinery.
General Notes U. S. A. Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
General Notes TURKEY AEEE Yonetmeliğine Uygundur. FRANCE (TBD) SAR Body : 0.xx W/Kg (xxg), Body SAR limit: x.x W/Kg (xxg) DAS corps : 0.
General Notes List of Safety Symbols and Instructions The following table lists the meaning of the safety symbols labeled on the equipment. No. A Safety symbol Approved standards IEC60417 No.5007 Description "ON" (power) To indicate connection to the mains. B IEC60417 No.5008 "OFF" (power) To indicate disconnection from the mains. C IEC60417 No.
General Notes No. Safety symbol Approved standards Description J IEC60417 No.5031 Direct current To indicate on the rating plate that the equipment is suitable for direct current only; to identify relevant terminals. K IEC60417 No.5172 Class II equipment To identify equipment meeting the safety requirements specified for Class II equipment according to IEC 61140. L ISO 3864 General prohibition To identify actions or operations that are prohibited.
Contact List This address list is current as of May 2020. A more up-to-date contact address can be obtained from the corresponding website listed here. If you do not find what you need on any of these pages, please visit the main Epson home page at www.epson.com. EUROPE, MIDDLE EAST & AFRICA ALBANIA AUSTRIA http://www.itd-al.com https://www.epson.at ITD Sh.p.k. Epson Deutschland GmbH BELGIUM Epson Europe B.V. Branch office Belgium https://www.epson.be BOSNIA AND HERZEGOVINA NET d.o.o.
Contact List GERMANY GREECE https://www.epson.de https://www.oktabit.gr Epson Deutschland GmbH Oktabit S.A. HUNGARY Epson Europe B.V. Branch Office Hungary IRELAND Epson (UK) Ltd. https://www.epson.ie https://www.epson.hu ISRAEL ITALY KAZAKHSTAN LATVIA https://www.epson.co.il https://www.epson.it http://www.epson.kz https://www.epson.lv LITHUANIA LUXEMBURG NORTH MACEDONIA NETHERLANDS Epson Israel Epson Service Center Lithuania Epson Italia s.p.a. Epson Europe B.V.
Contact List SLOVENIA SPAIN SWEDEN http://www.birotehna.si https://www.epson.es https://www.epson.se Birotehna d.o.o. Epson Ibérica, S.A.U. Epson Sweden SWITZERLAND Epson Deutschland GmbH Branch office Switzerland https://www.epson.ch TURKEY Tecpro Bilgi Teknolojileri Tic. ve San. Ltd. Sti. UK Epson (UK) Ltd. https://www.epson.co.uk http://www.tecpro.com.tr AFRICA https://www.epson.co.za or https://www.epson.fr SOUTH AFRICA Epson South Africa https://www.epson.co.
Contact List SOUTH AMERICA ARGENTINA BRAZIL CHILE COLOMBIA https://epson.com.ar https://epson.com.br https://epson.cl https://epson.com.co PERU VENEZUELA https://epson.com.pe https://epson.com.ve Epson Argentina S.R.L. Epson Peru S.A. Epson do Brasil Epson Chile S.A. Epson Colombia Ltd. Epson Venezuela S.A. ASIA & OCEANIA AUSTRALIA CHINA HONG KONG INDIA https://www.epson.com.au https://www.epson.com.cn https://www.epson.com.hk https://www.epson.co.
Contact List THAILAND Epson (Thailand) Co.,Ltd. https://www.epson.co.
