User Manual

4. Press the arrow buttons to select one of these options and press the OK button:

• Wi-Fi Settings: Resets all network settings.

• All except Wi-Fi: Resets all control panel settings, except for network settings.

• All Settings: Resets all control panel settings.

You see a confirmation screen.

5. Press the OK button to reset the selected settings.

(Press the stop button if you want to cancel the operation.)

Parent topic: Solving Problems

Solving Setup Problems

Check these sections if you have problems while setting up your product.

Noise After Ink Installation

Software Installation Problems

Control Panel Setup Problems

Parent topic: Solving Problems

Noise After Ink Installation

If you hear noises from your product after installing ink, check the following:

• The first time you install ink cartridges, the product must prime its print head. Wait until priming

finishes before you turn off the product, or it may prime improperly and use excess ink the next time

you turn it on. Your product is finished priming the print head when the power light stops flashing.

• If the product's print head stops moving or making noise, and the charging process has not finished

after approximately 5 minutes, turn off your product. Turn it back on and check to see if charging is still

in progress. If it is still in progress, contact Epson for help.

Parent topic: Solving Setup Problems